Luis Alberto Clementi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Luis Alberto Clementi has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Jorge Ruben Vega
CIESE, Universidad Tecnológica Nacional, Facultad Regional Santa Fe, e INTEC (CONICET-UNL)
4 shared publications - Ariel Andrés Antonio Braidot
Laboratorio de Biomecánica – Universidad Nacional de Entre Ríos
3 shared publications - Marco A. López Ibarra
National University of Entre Ríos
2 shared publications - Agustina Violeta Schenone
Instituto de Desarrollo Tecnológico para la Industria Química (INTEC), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) and Universidad Nacional del Litoral (UNL), Ruta Nacional N° 168, Santa Fe 3000, Argentina
1 shared publication - Alejandro J. Hadad
National University of Entre Ríos
1 shared publication - Alejandro Zavala
Universidad Nacional de Entre Ríos
1 shared publication
Latest Publications
- Open Access
- 26 February 2025
- Published by Asociación Argentina De Mecánica Computacional in Mecánica Computacional
- Vol. 41 (20) , 1065-1074
Soft Sensor Basado en Redes Neuronales Recurrentes: Aplicación al Monitoreo de la Producción de Caucho Nitrilo
En Argentina, el caucho nitrilo (NBR) se produce a partir de una polimerización en emulsión en un reactor batch. La medición de variables de calidad del polímero (por ejemplo, con analizadores en línea o en laboratorio) no asegura un monitoreo adecuado de la reacción. En este trabajo se desarrolla un soft-sensor (SS) para estimar en tiempo real algunas variables de calidad del producto. La complejidad reside en las dinámicas altamente no-lineales involucradas en el proceso. Por ello, el SS propuesto utiliza redes neuronales recurrentes. La evaluación de la herramienta de estimación se realiza a través de un simulador numérico del proceso NBR ajustado a la planta industrial. Las estimaciones obtenidas en distintos escenarios de operación del reactor son promisorias. El SS podría ser implementado en la planta industrial en forma sencilla.
- 26 February 2025
- Published by Asociación Argentina De Mecánica Computacional in Mecánica Computacional
- Vol. 41 (20) , 1065-1074
Open AccessSoft Sensor Basado en Redes Neuronales Recurrentes: Aplicación al Monitoreo de la Producción de Caucho Nitrilo
En Argentina, el caucho nitrilo (NBR) se produce a partir de una polimerización en emulsión en un reactor batch. La medición de variables de calidad del polímero (por ejemplo, con analizadores en línea o en laboratorio) no asegura un monitoreo adecuado de la reacción. En este trabajo se desarrolla un soft-sensor (SS) para estimar en tiempo real algunas variables de calidad del producto. La complejidad reside en las dinámicas altamente no-lineales involucradas en el proceso. Por ello, el SS propuesto utiliza redes neuronales recurrentes. La evaluación de la herramienta de estimación se realiza a través de un simulador numérico del proceso NBR ajustado a la planta industrial. Las estimaciones obtenidas en distintos escenarios de operación del reactor son promisorias. El SS podría ser implementado en la planta industrial en forma sencilla.
- 31 May 2024
- Published by Springer Nature
- p. 413-427
Evaluation of an Open Access Markerless Motion Capture System During Gait Analysis
- 31 May 2024
- Published by Springer Nature
- p. 413-427
Evaluation of an Open Access Markerless Motion Capture System During Gait Analysis
- 15 February 2024
- Published by Springer Nature
- p. 56-66
In Vivo Determination and Representation of Muscle's Paths from Magnetic Resonance Images
- 15 February 2024
- Published by Springer Nature
- p. 56-66
In Vivo Determination and Representation of Muscle's Paths from Magnetic Resonance Images
- 4 January 2024
- Published by Springer Nature
- p. 162-171
3D Link-Segment Model for Kinematics and Kinetics of Lower Limbs in Soccer Free Kick: Protocol Design
- 4 January 2024
- Published by Springer Nature
- p. 162-171
3D Link-Segment Model for Kinematics and Kinetics of Lower Limbs in Soccer Free Kick: Protocol Design
- 4 June 2023
- Published by Wiley in Macromolecular Reaction Engineering
- Vol. 17 (5)
An Adaptive Soft Sensor for On‐Line Monitoring the Mass Conversion in the Emulsion Copolymerization of the Continuous SBR Process
Soft sensors (SS) are of importance in monitoring polymerization processes because numerous production and quality variables cannot be measured online. Adaptive SSs are of interest to maintain accurate estimations under disturbances and changes in operating points. This study proposes an adaptive SS to online estimate the mass conversion in the emulsion copolymerization required for the production of Styrene‐Butadiene rubber (SBR). The SS includes a bias term calculated from sporadic laboratory measurements. Typically, the bias is updated every time a new laboratory report becomes available, but this strategy leads to unnecessarily frequent bias updates. The SS includes a statistic‐based tool to avoid unnecessary bias updates and reduce the variability of the bias with respect to classical approaches. A control chart (CC) for individual determinations combined with an algorithmic Cusum is used to monitor the statistical stability of the average prediction error. The adaptive SS enables a bias update only when a loss of said statistical stability is detected. Several bias update methods are tested on a simulated industrial train of reactors for the latex production in the SBR process. The best results are obtained by combining the proposed CC‐based approach with a previously developed Bayesian bias update strategy.
- 4 June 2023
- Published by Wiley in Macromolecular Reaction Engineering
- Vol. 17 (5)
An Adaptive Soft Sensor for On‐Line Monitoring the Mass Conversion in the Emulsion Copolymerization of the Continuous SBR Process
Soft sensors (SS) are of importance in monitoring polymerization processes because numerous production and quality variables cannot be measured online. Adaptive SSs are of interest to maintain accurate estimations under disturbances and changes in operating points. This study proposes an adaptive SS to online estimate the mass conversion in the emulsion copolymerization required for the production of Styrene‐Butadiene rubber (SBR). The SS includes a bias term calculated from sporadic laboratory measurements. Typically, the bias is updated every time a new laboratory report becomes available, but this strategy leads to unnecessarily frequent bias updates. The SS includes a statistic‐based tool to avoid unnecessary bias updates and reduce the variability of the bias with respect to classical approaches. A control chart (CC) for individual determinations combined with an algorithmic Cusum is used to monitor the statistical stability of the average prediction error. The adaptive SS enables a bias update only when a loss of said statistical stability is detected. Several bias update methods are tested on a simulated industrial train of reactors for the latex production in the SBR process. The best results are obtained by combining the proposed CC‐based approach with a previously developed Bayesian bias update strategy.
- 1 December 2010
- Published by Wiley in Particle & Particle Systems Characterization
- Vol. 27 (5-6) , 146-157
Particle Size Distribution of Multimodal Polymer Dispersions by Multiangle Dynamic Light Scattering. Solution of the Inverse Problem on the Basis of a Genetic Algorithm
A method for estimating the particle size distribution (PSD) of dilute latexes from multiangle dynamic light scattering (MDLS) measurements is presented. The estimation procedure includes two main steps: 1) the calculation of the angle‐dependent average diameters of the PSD from MDLS measurements, and 2) the estimation of the PSD through an optimization strategy based on a genetic algorithm (GA). First, the capability of the method was tested on the basis of three simulated examples that involved different PSD shapes, widths, and diameter ranges. Then, the method was employed for estimating the PSD of three samples: a polystyrene latex standard of narrow PSD and known nominal diameter; a mixture of two polystyrene standards of narrow PSDs; and an industrial latex of unknown composition. For comparison, all examples were also solved by numerical inversion of the MDLS autocorrelation measurements through a linear constrained Tikhonov regularization technique. The proposed method appears as an effective and robust tool for characterizing unimodal and multimodal PSDs, without requiring any a priori assumption on the mode shapes or on the PSD diameter range.
- 1 December 2010
- Published by Wiley in Particle & Particle Systems Characterization
- Vol. 27 (5-6) , 146-157
Particle Size Distribution of Multimodal Polymer Dispersions by Multiangle Dynamic Light Scattering. Solution of the Inverse Problem on the Basis of a Genetic Algorithm
A method for estimating the particle size distribution (PSD) of dilute latexes from multiangle dynamic light scattering (MDLS) measurements is presented. The estimation procedure includes two main steps: 1) the calculation of the angle‐dependent average diameters of the PSD from MDLS measurements, and 2) the estimation of the PSD through an optimization strategy based on a genetic algorithm (GA). First, the capability of the method was tested on the basis of three simulated examples that involved different PSD shapes, widths, and diameter ranges. Then, the method was employed for estimating the PSD of three samples: a polystyrene latex standard of narrow PSD and known nominal diameter; a mixture of two polystyrene standards of narrow PSDs; and an industrial latex of unknown composition. For comparison, all examples were also solved by numerical inversion of the MDLS autocorrelation measurements through a linear constrained Tikhonov regularization technique. The proposed method appears as an effective and robust tool for characterizing unimodal and multimodal PSDs, without requiring any a priori assumption on the mode shapes or on the PSD diameter range.