Margaritis Tonidis
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Margaritis Tonidis has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Veit Birtel
Materials Testing Institute University of Stuttgart Stuttgart Germany
2 shared publicationsAkanshu Sharma
Lyles School of Civil Engineering Purdue University West Lafayette Indiana USA
1 shared publication- Akanshu Sharma
Lyles School of Civil and Construction Engineering Purdue University West Lafayette Indiana USA
1 shared publication
Latest Publications
- Open Access
- 24 July 2025
- Published by Wiley in Earthquake Engineering & Structural Dynamics
Seismic Retrofit of Non‐Seismically Designed 3D Beam‐Column Joints With Post‐Installed Steel Haunches
The paper presents experimental results on two‐dimensional and three‐dimensional full‐scale exterior reinforced concrete beam‐column joints subassemblies retrofitted with the Fully Fastened Haunch Retrofit Solution. The specimens were non‐seismically designed with no transverse reinforcement in the joint core, thus making them vulnerable to joint shear failure. Three different beam‐column joint configurations were investigated. The first one was a two‐dimensional subassembly serving as a reference. Two unloaded transverse beams were added in the second specimen, while the third one additionally incorporated a monolithically cast slab. The specimens were subjected to unidirectional, quasi‐static cyclic loads. In this retrofit solution, steel diagonals are post‐installed onto the column and beam to create a new force path around the joint and thereby relocate the plastic hinge away from the joint to the beam. The haunch elements were connected to the column and beam with bonded anchors. The results showcased an upgraded seismic performance of the beam‐column joints in terms of stiffness, strength, and ductility compared to their as‐built counterparts. The results were evaluated in terms of cyclic load‐displacement behaviour, energy dissipation, crack development in concrete, strain development in reinforcing bars and in steel diagonals, as well as qualitative force distribution within the anchor group. The redistribution of forces within the anchor group, an increase in anchorage capacity when the slab was present, as well as the vulnerability of a shear failure in the column due to the slab's participation in flexure constituted the main findings of this study. It was concluded that the performance and efficacy of this retrofit solution strongly depend on the anchorage performance.
- 24 July 2025
- Published by Wiley in Earthquake Engineering & Structural Dynamics
Open AccessSeismic Retrofit of Non‐Seismically Designed 3D Beam‐Column Joints With Post‐Installed Steel Haunches
The paper presents experimental results on two‐dimensional and three‐dimensional full‐scale exterior reinforced concrete beam‐column joints subassemblies retrofitted with the Fully Fastened Haunch Retrofit Solution. The specimens were non‐seismically designed with no transverse reinforcement in the joint core, thus making them vulnerable to joint shear failure. Three different beam‐column joint configurations were investigated. The first one was a two‐dimensional subassembly serving as a reference. Two unloaded transverse beams were added in the second specimen, while the third one additionally incorporated a monolithically cast slab. The specimens were subjected to unidirectional, quasi‐static cyclic loads. In this retrofit solution, steel diagonals are post‐installed onto the column and beam to create a new force path around the joint and thereby relocate the plastic hinge away from the joint to the beam. The haunch elements were connected to the column and beam with bonded anchors. The results showcased an upgraded seismic performance of the beam‐column joints in terms of stiffness, strength, and ductility compared to their as‐built counterparts. The results were evaluated in terms of cyclic load‐displacement behaviour, energy dissipation, crack development in concrete, strain development in reinforcing bars and in steel diagonals, as well as qualitative force distribution within the anchor group. The redistribution of forces within the anchor group, an increase in anchorage capacity when the slab was present, as well as the vulnerability of a shear failure in the column due to the slab's participation in flexure constituted the main findings of this study. It was concluded that the performance and efficacy of this retrofit solution strongly depend on the anchorage performance.
- Open Access
- 5 September 2024
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 53 (14) , 4451-4476
Experimental and numerical investigations on the influence of transverse beams and slab on the seismic behavior of non‐seismically designed exterior beam‐column joints
The study presents experimental and numerical results on two‐dimensional and three‐dimensional full‐scale exterior non‐seismically designed (NSD) reinforced concrete (RC) beam‐column joint subassemblies subjected to quasi‐static cyclic lateral loading. The tests were augmented by detailed 3D finite element modeling to obtain further information about the joint behavior. Through these systematic investigations and their detailed evaluation, clear conclusions could be drawn on the effect of transverse beams and slab on the overall seismic behavior of beam‐column joints, where the joint core was devoid of transverse reinforcement. It was found that the presence of transverse beams enhanced both the ultimate joint shear strength and joint shear strength at first joint cracking. The crack development in concrete revealed that the diagonal joint shear cracks extended from the joint core into the transverse beams. The slab participation under flexure, when acting in tension, decreased with increase in drift due to intervening loss in joint stiffness, which was inconsistent with the observations in subassemblies where the joints were confined with transverse reinforcement. It was found that the inclined cracking in the transverse beams was caused due to joint shear stresses and aggravated due to torsional stresses when a slab was present. Normalized joint shear stress and principal tensile stress values were evaluated for first joint shear cracking and ultimate joint shear strength. These values may be useful for the seismic assessment of non‐seismically designed beam‐column joints with transverse beams and slab.
- 5 September 2024
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 53 (14) , 4451-4476
Open AccessExperimental and numerical investigations on the influence of transverse beams and slab on the seismic behavior of non‐seismically designed exterior beam‐column joints
The study presents experimental and numerical results on two‐dimensional and three‐dimensional full‐scale exterior non‐seismically designed (NSD) reinforced concrete (RC) beam‐column joint subassemblies subjected to quasi‐static cyclic lateral loading. The tests were augmented by detailed 3D finite element modeling to obtain further information about the joint behavior. Through these systematic investigations and their detailed evaluation, clear conclusions could be drawn on the effect of transverse beams and slab on the overall seismic behavior of beam‐column joints, where the joint core was devoid of transverse reinforcement. It was found that the presence of transverse beams enhanced both the ultimate joint shear strength and joint shear strength at first joint cracking. The crack development in concrete revealed that the diagonal joint shear cracks extended from the joint core into the transverse beams. The slab participation under flexure, when acting in tension, decreased with increase in drift due to intervening loss in joint stiffness, which was inconsistent with the observations in subassemblies where the joints were confined with transverse reinforcement. It was found that the inclined cracking in the transverse beams was caused due to joint shear stresses and aggravated due to torsional stresses when a slab was present. Normalized joint shear stress and principal tensile stress values were evaluated for first joint shear cracking and ultimate joint shear strength. These values may be useful for the seismic assessment of non‐seismically designed beam‐column joints with transverse beams and slab.