Joakim Kattelus
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Joakim Kattelus has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Jorge A. Velasco
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
10 shared publications - Reetta Karinen
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
10 shared publications - Riikka L. Puurunen
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
10 shared publications - Emma Verkama
Aalto University
5 shared publications - Dmitry Yu. Murzin
Faculty of Science and Engineering, Åbo Akademi University, Henriksgatan 2, Turku, Finland, 20500
4 shared publications - Ellen Järvinen
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
4 shared publications
Latest Publications
- Open Access
- 4 October 2026
- Published by Springer Nature in Journal of Phase Equilibria and Diffusion
- p. 1-21
Estimation of the Pitzer Parameters for 1-1, 2-1, 1-2, 3-1, and 1-3 Single Electrolytes at 25 °C
The Pitzer model is widely used in process models for determining the thermodynamic properties of concentrated aqueous electrolytes. The main drawback is the need for experimentally determined parameters for each ion pair in the system. The estimation of unknown Pitzer parameters of electrolytes is thus an attractive prospect. This paper investigates machine learning-based models for the task of predicting the Pitzer parameters of binary electrolytes based on the properties of the constituent ions. A kernel ridge regression model was found to give the best results. Parameters important for the prediction task were found to be the ionic charges, radii, and approximate values for the chemical hardness. Pitzer parameters derived from the model generally gave similar or better predictions for mean activity coefficients than non-electrolyte specific terms or a previously published expression for the estimation of Pitzer parameters. However, performance was poor for ions showing strong association, for four-coordinated complex ions, and organic ions. Nevertheless, this paper shows that there is systematic behavior in the Pitzer parameters that makes it possible to estimate these parameters if enough training data is available.
- 4 October 2026
- Published by Springer Nature in Journal of Phase Equilibria and Diffusion
- p. 1-21
Open AccessEstimation of the Pitzer Parameters for 1-1, 2-1, 1-2, 3-1, and 1-3 Single Electrolytes at 25 °C
The Pitzer model is widely used in process models for determining the thermodynamic properties of concentrated aqueous electrolytes. The main drawback is the need for experimentally determined parameters for each ion pair in the system. The estimation of unknown Pitzer parameters of electrolytes is thus an attractive prospect. This paper investigates machine learning-based models for the task of predicting the Pitzer parameters of binary electrolytes based on the properties of the constituent ions. A kernel ridge regression model was found to give the best results. Parameters important for the prediction task were found to be the ionic charges, radii, and approximate values for the chemical hardness. Pitzer parameters derived from the model generally gave similar or better predictions for mean activity coefficients than non-electrolyte specific terms or a previously published expression for the estimation of Pitzer parameters. However, performance was poor for ions showing strong association, for four-coordinated complex ions, and organic ions. Nevertheless, this paper shows that there is systematic behavior in the Pitzer parameters that makes it possible to estimate these parameters if enough training data is available.
- Open Access
- 16 September 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (18)
On the Acidity Characterization of Pristine and Zinc‐Modified H‐ZSM‐5 Zeolites: Comparison of Adsorption‐Based Characterization Methods
Unlike temperature‐programmed desorption (TPD) of ammonia (NH 3 ‐TPD) and Fourier‐transform infrared spectroscopy of adsorbed pyridine (pyridine‐FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm‐TPD) relies on a Brønsted‐acid‐catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm‐TPD responses for metals‐modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc‐modified H‐ZSM‐5 zeolites from IPAm‐TPD against those from NH 3 ‐TPD, and pyridine‐FTIR. For pristine zeolites, the IPAm‐TPD data exhibited the expected Brønsted‐site‐related propylene desorption feature, with propylene amounts proportional to framework aluminum, strongly adsorbed ammonia in NH 3 ‐TPD, and Brønsted‐associated pyridine in pyridine‐FTIR. However, the IPAm‐TPD data of the zinc‐modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm‐TPD results to those of NH 3 ‐TPD and pyridine‐FTIR suggested contributions from a Brønsted‐site‐related propylene release, an additional, likely Lewis‐site‐related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted‐site‐related propylene response was quantified and compared to quantitative pyridine‐FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 16 September 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (18)
Open AccessOn the Acidity Characterization of Pristine and Zinc‐Modified H‐ZSM‐5 Zeolites: Comparison of Adsorption‐Based Characterization Methods
Unlike temperature‐programmed desorption (TPD) of ammonia (NH 3 ‐TPD) and Fourier‐transform infrared spectroscopy of adsorbed pyridine (pyridine‐FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm‐TPD) relies on a Brønsted‐acid‐catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm‐TPD responses for metals‐modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc‐modified H‐ZSM‐5 zeolites from IPAm‐TPD against those from NH 3 ‐TPD, and pyridine‐FTIR. For pristine zeolites, the IPAm‐TPD data exhibited the expected Brønsted‐site‐related propylene desorption feature, with propylene amounts proportional to framework aluminum, strongly adsorbed ammonia in NH 3 ‐TPD, and Brønsted‐associated pyridine in pyridine‐FTIR. However, the IPAm‐TPD data of the zinc‐modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm‐TPD results to those of NH 3 ‐TPD and pyridine‐FTIR suggested contributions from a Brønsted‐site‐related propylene release, an additional, likely Lewis‐site‐related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted‐site‐related propylene response was quantified and compared to quantitative pyridine‐FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 31 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
On the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 31 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 3 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
On the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 3 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 9 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
On the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 9 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 24 November 2025
- Published by Elsevier in Journal of Catalysis
- Vol. 453
On the role of hydrogen-deficient species during alkylamine hydrotreating on platinum catalysts
- 24 November 2025
- Published by Elsevier in Journal of Catalysis
- Vol. 453
Open AccessOn the role of hydrogen-deficient species during alkylamine hydrotreating on platinum catalysts
- Open Access
- 1 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
The role of hydrogen-deficient species during alkylamine hydrotreating on platinum catalysts
The mechanism of hydrodenitrogenation (HDN) of aliphatic primary amines, which are intermediates during HDN of renewable feedstocks, was investigated. The reactions of methylamine, ethylamine and dimethylamine on Pt(111) were studied using density functional theory (DFT). The hydrogen-deficient amine species predicted by DFT were experimentally validated through dodecylamine HDN experiments using a Pt/ZrO2 catalyst and deuterium gas. The C–H bonds of the amines were found to be labile: the amines adsorb on Pt through the NH2-group, after which C–H bond dissociation can occur, even for C–H bonds far from the NH2-group, resulting in the formation of various hydrogen-deficient species. Computational results indicated that nitrogen removal (N-removal) preferentially occurs through these hydrogen-deficient species because hydrogen removal from the α-carbon favors C–N bond dissociation. Additionally, these hydrogen-deficient species can react with each other, forming heavier condensation products such as secondary amines or imines. The experimental nitrogen removal rate of hexadecylamine on Pt/ZrO2 increased with decreasing hydrogen partial pressure, consistent with a mechanism in which hydrogen-deficient species serve as key reaction intermediates.
- 1 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe role of hydrogen-deficient species during alkylamine hydrotreating on platinum catalysts
The mechanism of hydrodenitrogenation (HDN) of aliphatic primary amines, which are intermediates during HDN of renewable feedstocks, was investigated. The reactions of methylamine, ethylamine and dimethylamine on Pt(111) were studied using density functional theory (DFT). The hydrogen-deficient amine species predicted by DFT were experimentally validated through dodecylamine HDN experiments using a Pt/ZrO2 catalyst and deuterium gas. The C–H bonds of the amines were found to be labile: the amines adsorb on Pt through the NH2-group, after which C–H bond dissociation can occur, even for C–H bonds far from the NH2-group, resulting in the formation of various hydrogen-deficient species. Computational results indicated that nitrogen removal (N-removal) preferentially occurs through these hydrogen-deficient species because hydrogen removal from the α-carbon favors C–N bond dissociation. Additionally, these hydrogen-deficient species can react with each other, forming heavier condensation products such as secondary amines or imines. The experimental nitrogen removal rate of hexadecylamine on Pt/ZrO2 increased with decreasing hydrogen partial pressure, consistent with a mechanism in which hydrogen-deficient species serve as key reaction intermediates.
- Open Access
- 25 August 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (20) , 2507-2520
Hydrodeoxygenation and Hydrodenitrogenation of n-Hexadecanamide with Supported NiMo Sulfide Catalysts
Amides, which contain both oxygen and nitrogen, are present in many potential feedstocks for renewable fuels. There is a consequent need to study the hydrodenitrogenation (HDN) and hydrodeoxygenation (HDO) of amides. This work studies the HDN and HDO of hexadecanamide with sulfided NiMo/ $$\gamma $$ - $$\hbox {Al}_2\hbox {O}_3$$ and NiMo/ $$\hbox {TiO}_2$$ catalysts. The experiments are conducted in a batch reactor, with decalin as a solvent. Hexadecanamide is found to easily undergo either dehydration into hexadecanenitrile or deammonization into palmitic acid. Hydrotreating of hexadecanamide consequently occurs either through an initial HDO step (dehydration) into hexadecanonitrile, followed by reduction and HDN of the resulting hexadecylamine, or through an initial HDN step (deammonization) followed by HDO of the resulting palmitic acid. On both NiMo/ $$\gamma $$ - $$\hbox {Al}_2\hbox {O}_3$$ and NiMo/ $$\hbox {TiO}_2$$ , HDN of the amide is slower than HDO. The secondary amine, dihexadecylamine, is a major intermediate, formed through condensation reactions between hexadecylamine and palmitic acid or by the self-condensation of hexadecylamine. Thus, after the initial dehydration or deammonization step, hydrotreating of the primary amide follows the pathways associated with the HDN of primary amines and the HDO of primary carboxylic acids. NiMo/ $$\hbox {TiO}_2$$ is a more active amide hydrotreating catalyst than NiMo/ $$\gamma $$ - $$\hbox {Al}_2\hbox {O}_3$$ . This is attributed to $$\hbox {TiO}_2$$ catalyzing the initial dehydration (HDO) step, as well as to more complete sulfidation of Mo and the better incorporation of the Ni promoter in the $$\hbox {MoS}_2$$ phase on $$\hbox {TiO}_2$$ .- 25 August 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (20) , 2507-2520
Open AccessHydrodeoxygenation and Hydrodenitrogenation of n-Hexadecanamide with Supported NiMo Sulfide Catalysts
Amides, which contain both oxygen and nitrogen, are present in many potential feedstocks for renewable fuels. There is a consequent need to study the hydrodenitrogenation (HDN) and hydrodeoxygenation (HDO) of amides. This work studies the HDN and HDO of hexadecanamide with sulfided NiMo/ $$\gamma $$ - $$\hbox {Al}_2\hbox {O}_3$$ and NiMo/ $$\hbox {TiO}_2$$ catalysts. The experiments are conducted in a batch reactor, with decalin as a solvent. Hexadecanamide is found to easily undergo either dehydration into hexadecanenitrile or deammonization into palmitic acid. Hydrotreating of hexadecanamide consequently occurs either through an initial HDO step (dehydration) into hexadecanonitrile, followed by reduction and HDN of the resulting hexadecylamine, or through an initial HDN step (deammonization) followed by HDO of the resulting palmitic acid. On both NiMo/ $$\gamma $$ - $$\hbox {Al}_2\hbox {O}_3$$ and NiMo/ $$\hbox {TiO}_2$$ , HDN of the amide is slower than HDO. The secondary amine, dihexadecylamine, is a major intermediate, formed through condensation reactions between hexadecylamine and palmitic acid or by the self-condensation of hexadecylamine. Thus, after the initial dehydration or deammonization step, hydrotreating of the primary amide follows the pathways associated with the HDN of primary amines and the HDO of primary carboxylic acids. NiMo/ $$\hbox {TiO}_2$$ is a more active amide hydrotreating catalyst than NiMo/ $$\gamma $$ - $$\hbox {Al}_2\hbox {O}_3$$ . This is attributed to $$\hbox {TiO}_2$$ catalyzing the initial dehydration (HDO) step, as well as to more complete sulfidation of Mo and the better incorporation of the Ni promoter in the $$\hbox {MoS}_2$$ phase on $$\hbox {TiO}_2$$ . - Open Access
- 30 December 2024
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (4) , 1259-1271
Catalytic hydrodenitrogenation of primary, secondary, and tertiary C12-alkyl amines over a platinum on zirconia catalyst
The Pt-catalyzed hydrotreatment of primary, secondary and tertiary amines proceeds via a shared reaction network. N-removal occurs through condensation or C–N hydrogenolysis steps involving the primary amine.
- 30 December 2024
- Published by Royal Society of Chemistry (RSC) in Catalysis Science & Technology
- Vol. 15 (4) , 1259-1271
Open AccessCatalytic hydrodenitrogenation of primary, secondary, and tertiary C12-alkyl amines over a platinum on zirconia catalyst
The Pt-catalyzed hydrotreatment of primary, secondary and tertiary amines proceeds via a shared reaction network. N-removal occurs through condensation or C–N hydrogenolysis steps involving the primary amine.
- Open Access
- 31 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Hydrodeoxygenation and hydrodenitrogenation of n-hexadecanamide with supported NiMo sulfide catalysts
Amides, which contain both oxygen and nitrogen, are present in many potential feedstocks for renewable fuels. There is a consequent need to study the hydrodenitrogenation (HDN) and hydrodeoxygenation(HDO) of amides. This work studies the HDN and HDO of hexadecanamidewith sulfided NiMo/γ-Al2O3 and NiMo/TiO2 catalysts. The experiments are conducted in a batch reactor, with decalin as a solvent. Hexadecanamide is found to easily undergo either dehydration into hexadecanenitrile or deammonization into palmitic acid. Hydrotreating of hexadecanamide consequently occurs either through an initial HDO step (dehydration) into hexadecanonitrile, followed by reduction and HDN of the resulting hexadecylamine, or through an initial HDN step (deammonization) followed by HDO of the resulting palmitic acid. On both NiMo/γ-Al2O3 and NiMo/TiO2, HDN of the amide is slower than HDO. The secondary amine, dihexadecylamine, is a major intermediate, formed through condensation reactions between hexadecylamine and palmitic acid or by the self-condensation of hexadecylamine. Thus, after the initial dehydration or deammonization step, hydrotreating of the primary amide follows the pathways associated with the HDN of primary amines and the HDO of primary carboxylic acids. NiMo/TiO2 is a more active amide hydrotreating catalyst than NiMo/γ-Al2O3. This is attributed to TiO2 catalysing initial amide HDO, as well as the more complete sulfidation of Mo and the better incorporation of the Ni promoter in the MoS2 phase.
- 31 October 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHydrodeoxygenation and hydrodenitrogenation of n-hexadecanamide with supported NiMo sulfide catalysts
Amides, which contain both oxygen and nitrogen, are present in many potential feedstocks for renewable fuels. There is a consequent need to study the hydrodenitrogenation (HDN) and hydrodeoxygenation(HDO) of amides. This work studies the HDN and HDO of hexadecanamidewith sulfided NiMo/γ-Al2O3 and NiMo/TiO2 catalysts. The experiments are conducted in a batch reactor, with decalin as a solvent. Hexadecanamide is found to easily undergo either dehydration into hexadecanenitrile or deammonization into palmitic acid. Hydrotreating of hexadecanamide consequently occurs either through an initial HDO step (dehydration) into hexadecanonitrile, followed by reduction and HDN of the resulting hexadecylamine, or through an initial HDN step (deammonization) followed by HDO of the resulting palmitic acid. On both NiMo/γ-Al2O3 and NiMo/TiO2, HDN of the amide is slower than HDO. The secondary amine, dihexadecylamine, is a major intermediate, formed through condensation reactions between hexadecylamine and palmitic acid or by the self-condensation of hexadecylamine. Thus, after the initial dehydration or deammonization step, hydrotreating of the primary amide follows the pathways associated with the HDN of primary amines and the HDO of primary carboxylic acids. NiMo/TiO2 is a more active amide hydrotreating catalyst than NiMo/γ-Al2O3. This is attributed to TiO2 catalysing initial amide HDO, as well as the more complete sulfidation of Mo and the better incorporation of the Ni promoter in the MoS2 phase.