Ellen Järvinen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ellen Järvinen has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jorge A. Velasco
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
6 shared publications - Reetta Karinen
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
6 shared publications - Riikka L. Puurunen
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
6 shared publications - Dmitry Yu. Murzin
Faculty of Science and Engineering, Åbo Akademi University, Henriksgatan 2, Turku, Finland, 20500
4 shared publications - Francesco Sandri
Faculty of Science and Engineering, Åbo Akademi University, Henriksgatan 2, Turku, Finland, 20500
4 shared publications - Joakim Kattelus
Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, P.O. Box 16100, Espoo, Finland, FI-00076 Aalto
4 shared publications
Latest Publications
- Open Access
- 16 September 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (18)
On the Acidity Characterization of Pristine and Zinc‐Modified H‐ZSM‐5 Zeolites: Comparison of Adsorption‐Based Characterization Methods
Unlike temperature‐programmed desorption (TPD) of ammonia (NH 3 ‐TPD) and Fourier‐transform infrared spectroscopy of adsorbed pyridine (pyridine‐FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm‐TPD) relies on a Brønsted‐acid‐catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm‐TPD responses for metals‐modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc‐modified H‐ZSM‐5 zeolites from IPAm‐TPD against those from NH 3 ‐TPD, and pyridine‐FTIR. For pristine zeolites, the IPAm‐TPD data exhibited the expected Brønsted‐site‐related propylene desorption feature, with propylene amounts proportional to framework aluminum, strongly adsorbed ammonia in NH 3 ‐TPD, and Brønsted‐associated pyridine in pyridine‐FTIR. However, the IPAm‐TPD data of the zinc‐modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm‐TPD results to those of NH 3 ‐TPD and pyridine‐FTIR suggested contributions from a Brønsted‐site‐related propylene release, an additional, likely Lewis‐site‐related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted‐site‐related propylene response was quantified and compared to quantitative pyridine‐FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 16 September 2026
- Published by Wiley in ChemCatChem
- Vol. 18 (18)
Open AccessOn the Acidity Characterization of Pristine and Zinc‐Modified H‐ZSM‐5 Zeolites: Comparison of Adsorption‐Based Characterization Methods
Unlike temperature‐programmed desorption (TPD) of ammonia (NH 3 ‐TPD) and Fourier‐transform infrared spectroscopy of adsorbed pyridine (pyridine‐FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm‐TPD) relies on a Brønsted‐acid‐catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm‐TPD responses for metals‐modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc‐modified H‐ZSM‐5 zeolites from IPAm‐TPD against those from NH 3 ‐TPD, and pyridine‐FTIR. For pristine zeolites, the IPAm‐TPD data exhibited the expected Brønsted‐site‐related propylene desorption feature, with propylene amounts proportional to framework aluminum, strongly adsorbed ammonia in NH 3 ‐TPD, and Brønsted‐associated pyridine in pyridine‐FTIR. However, the IPAm‐TPD data of the zinc‐modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm‐TPD results to those of NH 3 ‐TPD and pyridine‐FTIR suggested contributions from a Brønsted‐site‐related propylene release, an additional, likely Lewis‐site‐related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted‐site‐related propylene response was quantified and compared to quantitative pyridine‐FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 31 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
On the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 31 August 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 3 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
On the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 3 April 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 9 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
On the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- 9 March 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessOn the acidity characterization of pristine and zinc-modified H-ZSM-5 zeolites: Comparison of adsorption-based characterization methods
Unlike temperature-programmed desorption (TPD) of ammonia (NH 3 -TPD) and Fourier-transform infrared spectroscopy of adsorbed pyridine (pyridine-FTIR), where ammonia and pyridine adsorb and desorb without reaction, TPD of isopropylamine (IPAm-TPD) relies on a Brønsted-acid-catalyzed decomposition of isopropylamine to propylene and ammonia to selectively probe Brønsted acidity. Prior studies have reported altered IPAm-TPD responses for metals-modified zeolites relative to pristine zeolites, yet hypotheses on the cause have diverged. This work examined the acidity characterization results of pristine and zinc-modified H-ZSM-5 zeolites from IPAm-TPD against those from NH 3 -TPD, and pyridine-FTIR. For pristine zeolites, the IPAm-TPD data exhibited the expected Brønsted-site-related propylene desorption feature, with propylene amounts proportional to framework aluminium, strongly adsorbed ammonia in NH 3 -TPD, and Brønsted-associated pyridine in pyridine-FTIR. However, the IPAm-TPD data of the zinc-modified zeolites was more complex, with multiple desorption features. The mass spectrometry data and comparison of the quantitative IPAm-TPD results to those of NH 3 -TPD and pyridine-FTIR suggested contributions from a Brønsted-site-related propylene release, an additional, likely Lewis-site-related propylene release, and unidentified side products overlapping with typical propylene responses, possibly from dehydrogenation and aromatization reactions. When the Brønsted-site-related propylene response was quantified and compared to quantitative pyridine-FTIR results, the results seemed representative of Brønsted acidity despite the side reactions.
- Open Access
- 18 September 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (20) , 2404-2407
Correction: Characterization of Unmodified and Zinc-modified ZSM-5 Zeolites with Temperature-programmed Desorption of Ammonia and Isopropylamine
- 18 September 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (20) , 2404-2407
Open AccessCorrection: Characterization of Unmodified and Zinc-modified ZSM-5 Zeolites with Temperature-programmed Desorption of Ammonia and Isopropylamine
- Open Access
- 10 June 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (20) , 2393-2403
Characterization of Unmodified and Zinc-modified ZSM-5 Zeolites with Temperature-programmed Desorption of Ammonia and Isopropylamine
While the temperature-programmed desorption of ammonia (NH 3 -TPD) is widely used to analyze the combined Lewis and Brønsted acidity of heterogeneous catalysts, the temperature-programmed desorption of isopropylamine (IPAm-TPD) can be used for the selective analysis of Brønsted acidity. This work compared NH 3 -TPD and IPAm-TPD as analysis methods for the acidity of zeolitic samples, including H-ZSM-5-23, H-ZSM-5-50, H-ZSM-5-280, a Zn-modified H-ZSM-5-50 sample, and a γ-Al 2 O 3 reference sample. For the unmodified H-ZSM-5-23, H-ZSM-5-50, and H-ZSM-5-280, the total acidity determined with NH 3 -TPD remained higher and the Brønsted acidity determined with IPAm-TPD lower than the theoretical acidity estimated with the Al content of the materials. When the NH 3 -TPD saturation temperature was varied for H-ZSM-5-50 to examine the trends observed in the analyses, the temperature change affected primarily the low temperature peak of the TPD traces. The Zn-modified Zn/H-ZSM-5-50 sample yielded a multi-peak IPAm-TPD trace, though only a single peak trace was expected. Additionally, the value of Brønsted acidity showed no change from the unmodified zeolite.
- 10 June 2025
- Published by Springer Nature in Topics in Catalysis
- Vol. 68 (20) , 2393-2403
Open AccessCharacterization of Unmodified and Zinc-modified ZSM-5 Zeolites with Temperature-programmed Desorption of Ammonia and Isopropylamine
While the temperature-programmed desorption of ammonia (NH 3 -TPD) is widely used to analyze the combined Lewis and Brønsted acidity of heterogeneous catalysts, the temperature-programmed desorption of isopropylamine (IPAm-TPD) can be used for the selective analysis of Brønsted acidity. This work compared NH 3 -TPD and IPAm-TPD as analysis methods for the acidity of zeolitic samples, including H-ZSM-5-23, H-ZSM-5-50, H-ZSM-5-280, a Zn-modified H-ZSM-5-50 sample, and a γ-Al 2 O 3 reference sample. For the unmodified H-ZSM-5-23, H-ZSM-5-50, and H-ZSM-5-280, the total acidity determined with NH 3 -TPD remained higher and the Brønsted acidity determined with IPAm-TPD lower than the theoretical acidity estimated with the Al content of the materials. When the NH 3 -TPD saturation temperature was varied for H-ZSM-5-50 to examine the trends observed in the analyses, the temperature change affected primarily the low temperature peak of the TPD traces. The Zn-modified Zn/H-ZSM-5-50 sample yielded a multi-peak IPAm-TPD trace, though only a single peak trace was expected. Additionally, the value of Brønsted acidity showed no change from the unmodified zeolite.