GFGary G. Friedman

Gary G. Friedman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gary G. Friedman has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Homogenization-based numerical modeling of MXene composites

    by Rituparna Ghosh, Gary G. Friedman

    MXenes are two-dimensional transition metal carbides and nitrides that exhibit strong interactions with electromagnetic waves and outstanding electromagnetic shielding efficiency. Their potential for electromagnetic interference (EMI) shielding, devices for communication technologies, sensing and energy-storage applications has attracted significant research interest. However, lack of predictive models capable of relating MXene nanostructure to effective electromagnetic properties limits the rational design and optimization of MXene-based materials and devices. In principle, several types of material models can be useful depending on how the model is to be employed in a particular application. Probably among the simplest types of models useful for layered materials with structures similar to MXene are those based on treating the material as consisting of infinitely large arrangement of parallel sheets. Such models can provide a good fit to measured reflection and transmission of electromagnetic waves. However, they are not particularly useful when attempting to predict electromagnetic field interactions with devices of more complex geometries such as those which are likely to be used in MXene based antennas, transmission lines and shields. A more useful type of model in such applications is a homogenization-based model. Classical linear homogenization approaches, such as Maxwell-Garnett-type models, are generally applicable to composites with relatively low inclusion volume fractions and weak dipolar interactions between the inclusions. These assumptions are not well suited for MXene systems, which consist of high-aspect-ratio conducting flakes arranged in layered or structurally disordered configurations with strong inter-flake electrostatic coupling. Consequently, a more physically representative homogenization modeling framework is required to capture the collective electromagnetic response of MXene nanostructures. In this work, a numerical homogenization framework based on a Surface Charge Boundary Integral Equation formulation is developed to estimate the effective dielectric response of MXene films by explicitly accounting for nanoscale flake arrangement and electrostatic interactions. MXene flakes are modeled as high-aspect-ratio two-dimensional conducting structures separated by nanoscale dielectric gaps. Under the quasi-static approximation, induced surface charge distributions are computed numerically on flake boundaries using surface integral equations. The effective relative permittivity of the system is then extracted by comparing the stored electrostatic energy in the presence and absence of the flakes within a representative observation region. Parametric studies over flake aspect ratios, interflake spacing, and stacking configurations demonstrate that the effective dielectric constant increases strongly with increasing aspect ratio and fill fraction. The dielectric response also shows strong sensitivity to vertical interlayer spacing and weaker, but non-negligible, dependence on horizontal spacing. Interleaved configurations consistently produce larger dielectric enhancement than aligned structures due to stronger interlayer electrostatic coupling and localized field concentration within dielectric gaps. The angular anisotropy and structural disorder of MXene assemblies are also investigated using misaligned multilayer configurations. By varying the orientation of the applied electric field and introducing rotational and positional misalignment between flakes, the model predicts effective dielectric constants on the order of 10⁴-10⁵ at relatively low MXene volume fractions (~ 7%-10%). The results demonstrate that structural disorder enhances localized field concentration and multidirectional dipolar interactions, partially compensating for reduced filling ratio. The numerical predictions are validated through comparison with finite element method (FEM) simulations and analytical estimates based on layered electrostatic coupling models. While periodic FEM models reproduce similar qualitative trends, the proposed Surface Charge Boundary Integral Equation framework more naturally accommodates non-periodic interactions and structural disorder characteristic of realistic MXene films. Overall, the findings provide a classical physics-based explanation for the large dielectric permittivity observed in MXene-based composites and establish the importance of nanoscale geometry, stacking configuration, anisotropy, and structural disorder in governing the effective electromagnetic response. The proposed framework offers physically transparent design insight for engineering high-dielectric MXene materials for applications including EMI shielding, antennas, communication systems, and advanced electronic devices.

  • MXene interaction with electromagnetic radiation in the microwave range

    by Roman Rakhmanov, Yury Gogotsi, Gary G. Friedman

    The rapid development of the Internet of Things (IoT) and new generations of telecommunication networks bring forward a demand for thin, lightweight shielding materials and microwave circuit components. An exponentially increasing number of devices requires efficient electromagnetic interference (EMI) shielding. Current shielding materials are metals that are highly reflective, and electromagnetic absorbers are heavy and narrowband. Metamaterials are viable alternatives; however, laborious microfabrication is required. Increased interest in flexible electronics poses a great challenge for current Metallic conductors. Despite their benchmark performance present significant manufacturing challenges when it comes to flexible electronics. MXenes, two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides, are a large family of 2D materials that are promising for use in EMI shielding, antennas, transmission lines, waveguides, etc., owing to their high electrical conductivity. This, coupled with the variety of chemistries and structures available to MXenes, gives rise to unprecedented tunability of their properties, creates the possibility to adjust MXenes for specific applications, and provides a roadmap to achieving their stable performance. However, the underlying mechanisms of their interactions with electromagnetic waves are currently unknown. There is an additional gap in methods that can be applied to accurately measure the electromagnetic properties of MXene. This thesis focuses on elucidating the mechanism of MXene interaction with electromagnetic radiation and demonstrating MXene-based devices with performance rivaling metals. We will demonstrate the EMI shielding performance of various MXene compositions and the dependence on deposition methods and thickness. Further investigation of ultrathin nanometer-thick films demonstrates the ability to absorb up to 50% of incoming power up to the THz frequency range. Investigation of the variation of the film's morphology allows us to elucidate the performance of MXene from DC up to the THz range. These findings allow us to demonstrate highly effective and flexible MXene antennas and transmission lines, lightweight waveguides, and broadband absorbers.

  • Influence of MXene Interlayer Spacing on the Interaction with Microwave Radiation

    by Roman Rakhmanov, Stefano Ippolito, Marley Downes, Alex Inman, Jamal AlHourani, James Fitzpatrick, Yury Gogotsi, Gary Friedman

    The origin of MXene's excellent electromagnetic shielding performance is not fully understood. MXene films, despite being inhomogeneous at the nanometer scale, are often treated as if they are compared to bulk conductors. It is reasonable to wonder if the treatment of MXene as a homogeneous material remains valid at very small film thickness and if it depends on the interlayer spacing. The goal of the present work is to test if the homogeneous material model is applicable to nanometer‐thin Ti 3 C 2 T x MXene films and, if so, to investigate how the model parameters may depend on variations in MXene interlayer spacings. MXene films containing flakes with interlayer spacing between 1.9 and 5.5 Å have been prepared using various intercalating agents. It is shown that modeling the films as being homogeneous agrees with experimental tests in the microwave frequency range. Microwave conductivity and dielectric constant parameters are estimated for the homogeneous film model by fitting measured results. The direct current (DC) conductivity matches the estimated microwave conductivity on the order of magnitude. A highly effective dielectric constant provides a good fit for the lower conductivity MXene films. Optical absorption agrees with the homogeneous material model of thin films as well.


  • Open Access

    On trajectory control of magnetized spherical solids driven by magnetic force through soft medium

    by Yulia Malkova, Allon Guez, Gary Friedman

    Manipulation of untethered millimeter-sized devices (bots) inside the human body has many medical applications. Most of the prior work focused on movement of such bots inside fluids, usually at low Reynolds numbers. Yet, many medical procedures are performed within soft tissues. Bot translation in soft materials differs dramatically from their motion in fluid. This paper focuses on trajectory control of small, untethered spheres driven magnetically in soft media commonly used to simulate tissues. While spherical bot shapes offer the advantage of potentially rapid change in the direction of motion, the main challenge in controlling trajectories through soft materials is their nonlinear and history dependent response forces associated with irreversible medium modification. This paper introduces control modules for manipulating spherical bots in soft media along elementary trajectories of circular and straight segments, from which more general trajectories may be assembled. The proposed control is based on a phenomenological model of soft media response forces. Numerical implementation of the proposed trajectory control along circular trajectories is shown to compare well with the results of experimental tests indicating that the accuracy on the order of the bot radius is readily achievable for trajectories whose radii of curvature is on the order of 10 bot radii.

  • Open Access

    Ultrathin MXene film interaction with electromagnetic radiation in the microwave range

    by Roman Rakhmanov, Christopher Eugene Shuck, Jamal Al Hourani, Stefano Ippolito, Yury Gogotsi, Gary Friedman

    The quick progress in communication technologies demands superior electromagnetic interference (EMI) shielding materials. However, achieving a high shielding effectiveness (SE) with thin films, which is needed for microscale, flexible, and wearable devices, through absorption of EM radiation remains a challenge. 2D titanium carbide MXene, Ti3C2Tx, has been shown to efficiently reflect electromagnetic waves. In this paper, we investigated the electromagnetic shielding of ultrathin printed Ti3C2Tx films and recorded absorption up to 50% for 4 nm-thick films. This behavior is explained by impedance matching. Analysis of the sheet impedance in the X-band frequency range allows us to correlate the EMI shielding mechanism with the electrical conductivity measured within the same range. The average bulk in-plane conductivity for 4 to 40 nm-thick films reaches 106 S/m, while the average relaxation time is estimated at around 2.3 ps. Our figures of merit are similar to those reported for ultrathin metal films, such as gold, showing that an abundant MXene material can replace noble metals. We demonstrate that the MXene conductivity mechanism does not change from direct current to THz. The conventional method of reporting EMI SE is correlated with absolute values of transmitted, reflected, and absorbed power, which allows us to interpret previous results on MXene EMI shielding. Considering the easy deposition of thin MXenes films from solution onto a variety of surfaces, our findings offer an attractive alternative for shielding microscale devices and personal electronics.


  • Remote Manipulation of Untethered Bots in Soft Media

    by Yulia Malkova, Gary G. Friedman

    Scientific and engineering literature extensively discusses untethered miniature devices, also called bots, as those parts of medical robotic systems that can be manipulated remotely within the human body. There is clear evidence that this topic has gained significant traction based on the spike in publication over the past seven years (Koleoso et al., 2020). Robotic systems that employ micro- and millimeter size bots are thought to have numerous potential medical applications including drug delivery (Jang et al., 2019), localized heating or cooling, cessation of bleeding, clearing of occlusions, establishing a diagnosis based on sensing or biopsy, and minimally invasive surgeries. Most studies focuses on the actuation and control of such bots in fluid environment, typically at low Reynolds numbers. Yet, many medical applications would involve soft tissues, rather than fluids. While controlling tethered devices, such as needles, based on appropriate models of interaction with tissue has been the subject of considerable interest. However, no similar work has been published for untethered miniature devices. The goal of the present thesis is to develop trajectory planning and control methods for untethered solid millimeter size bots in soft tissue under the action of magnetic force. This study employs a recently developed model describing the interaction of untethered bots with soft materials during bot motion by implementing a numerical simulation of the model. Given the highly non-linear and past trajectory (history) dependent nature of the interaction with the medium, in addition to significant model parameter variability throughout soft media, the present thesis hypothesizes that a trajectory control based on the so-called Sliding Mode Control (SMC) method will make it possible for a bot to follow a large class of practical trajectories accurately. Numerical simulations of the proposed SMC method were conducted and experimentally validated for a class of trajectories that could be well approximated by circular and straight segments. The robustness of the proposed method was analyzed numerically by simulating trajectories in media with random variations of various model parameters as well as in the presence of significant delays in the feedback signal used to estimate the bot position. All the work carried out in this thesis applies to bots that are spherical making it possible to simplify the model, trajectory control, and their experimental validation. Furthermore, experimental validations are limited in this work to bots that are on the order of millimeters in diameter. While smaller bots may be of interest in medicine, they would be significantly harder to actuate and image during experimental validation experiments. At the same time, millimeter size bots are commensurate with the typical dimensions of needles widely employed in medical applications. Keywords: Medical Robotics, Micro Robots, Motion control, Robophysics, Soft Media, Untethered Device

  • Magnetic manipulation of colloids at the micro and nanoscale

    by Derek Stieler Halverson, Gary G. Friedman

    Manipulation and assembly of colloidal sub-micron and nanometer sized particles is important in many applications ranging from drug delivery and separation of biologically different species of micro-organisms and molecules to fabrication of meta-material micro- and nanostructures consisting of regular arrays of particles. Most of the methods that have been proposed are based on short-range interactions including chemical affinity and surface forces. Such forces are difficult and, most often, impossible to manipulate using externally tunable apparatus. Electric fields have been employed to create longer range forces. However, electric fields often affect biological molecules and can be substantially screened in ionic solutions. Magnetic field manipulation is a relatively unexplored method of manipulation of colloidal particles. Some work has been performed in the recent decade to develop methods of manipulation and assembly of non-magnetic colloidal particles near surfaces. However, the developed methods have been limited mainly to particles greater than 1 micrometer in diameter which experience relatively small Brownian motion. The question can arises: To what extent similar methods are applicable to manipulation of much smaller particles and molecules? Can Brownian motion be helpful for some applications? Another important question is: Can non-magnetic colloidal objects be manipulated away from surfaces?These are the main questions addressed in this work. The main contribution of this thesis is the development of a series of magnetic manipulation methods by which non-magnetic colloidal sub-micron particles and molecules can be manipulated near surfaces and in the bulk of a fluid suspension. One specific important contribution of this thesis is demonstration of magnetic trapping and transport of non-magnetic sub-micron particles and molecules near surfaces patterned with ferromagnetic material. This work is the first to demonstrate that biological molecules can be attached to designated areas on a substrate using magnetic trapping, for example. Development of a method for magnetic fractionation of non-magnetic colloids by size in bulk fluid suspension is also an important specific contribution of this thesis. Such fractionation dramatically improves on the speed of previously proposed depletion fractionation technique. Each specific method mentioned above will be described in separate chapters of this thesis.

  • Control of Small Magnetic Object in Artificial Human Tissue Material

    by Bosheng Wu, Gary G. Friedman

    The increasing availability of microbiome survey data has led to the use of complex machine learning and statistical approaches to measure taxonomic diversity and extract relationships between taxa and their host or environment. Accurately representing microbiome community structure has notable implications in medicine because recent work has demonstrated bidirectional interplay between microbiota and various organ systems. However, many approaches inadequately account for difficulties inherent to microbiome data, such as (1) insufficient sequencing depth resulting in sparse count data, (2) a large feature space relative to sample space, resulting in data prone to overfitting, and (3) library size imbalance, requiring normalization strategies that lead to compositional artifacts. Still, there exist approaches from other domains (e.g., natural language processing) that may be well-equipped at fitting microbiome data and may provide meaningful features that capture relevant aspects of the data. Two methods in particular are topic models and word embeddings, which characterize word co-occurrence as topics and capture semantic and lexical information of each word based on the word's neighbors, respectively. In this work, we show that a topic model can represent microbiome abundance data as topics, capturing "subcommunity'' structure from co-occurrence patterns among taxa, whereas word embeddings can represent a nucleotide subsequence as a dense, numeric vector that encapsulates the nucleotide neighborhood in which the subsequence exists. Specifically, we present two approaches, both of which are applied to 16S rRNA amplicon surveys. First, we utilize a topic model approach. We show that library-size normalization is unnecessary and, by exploiting topic-to-topic correlations, the topic model can successfully capture complex signals such as dynamic time-series behavior of taxonomic subcommunities. In addition, we present themetagenomics to demonstrate that topic features are flexible for downstream analysis. We link taxonomic co-occurrence to their predicted functional content by leveraging gene function prediction algorithms and a fully Bayesian multilevel regression model. Second, we use Skip-Gram word2vec and a recent sentence embedding approach to embed nucleotide sequences. Our results show that embedding sequences results in meaningful representations that can be used for exploratory analyses or for downstream machine learning applications that require numeric data. The sequence embeddings can preserve relevant information about the sequencing data such as k-mer context, sequence taxonomy, and sample class. The insights we provide are applicable to various types of count data that extend beyond the microbiome sequencing domain. These include ecological presence/absence surveys, RNAseq gene expression studies, metagenomic or whole genome sequencing studies, proteomic or metabolic research, text-based studies, and econometrics. In addition, our approaches for exploring the sequence embedding space are applicable to any type of text-base research, including genetics and natural language processing, as well applications utilizing deep learning, where embedding layers are used to encode text for deeper layers of the network. Lastly, our simulation approaches and evaluation of normalization techniques are generalizable, such that aspects of these strategies could be applied to microbiome studies and work consisting of compositional data other than 16S rRNA amplicon surveys.

  • Mechanisms of interaction of non-thermal plasma with living cells

    by Sameer Ulhas Kalghatgi, Gary G. Friedman

    Thermal plasmas and lasers have been widely used in medicine to cut, ablate and cauterize tissues through heating; in contrast, non-thermal plasma produces various highly active molecules and atoms without heat. As a result, its effects on living cells and tissues could be selective and tunable. This makes non-thermal plasma very attractive for medical applications. However, despite several interesting demonstrations of non-thermal plasma in blood coagulation and tissue sterilization, the biological and physical mechanisms of its interaction with living cells are still poorly understood impeding further development of non-thermal plasma as a clinical tool. Although several possible mechanisms of interaction have been suggested, no systematic experimental work has been performed to verify these hypotheses. Using cells in culture, it is shown in this work that non-thermal plasma created by dielectric barrier discharge (DBD) has dose-dependent effects ranging from increasing cell proliferation to inducing apoptosis which are consistent with the effects of oxidative stress. DNA damage is chosen as a marker to assess the effects of oxidative stress in a quantitative manner. It is demonstrated here that plasma induced DNA damage as well as other effects ranging from cell proliferation to apoptosis are indeed due to production of intracellular reactive oxygen species (ROS). We found that DNA damage is initiated primarily by plasma generated active neutral species which cannot be attributed to ozone alone. Moreover, it is found that extracellular media and its components play a critical role in the transfer of the non-thermal plasma initiated oxidative stress into cells. Specifically, it is found that the peroxidation efficiency of amino acids is the sole predictor of the ability of the medium to transfer the oxidative stress induced by non-thermal plasma. Phosphorylation of H2AX, a DNA damage marker, following plasma treatment is found to be ATR dependent and ATM independent, suggesting that non-thermal plasma may induce formation of bulky lesions unlike ionizing radiation (IR) or H₂O₂ which primarily produce DNA double strand breaks. Moreover, it is found that the pathway by which plasma generated oxidative stress is transferred across cellular membranes does not involve lipid peroxidation by-products, although lipid peroxidation does occur.

  • Hysteresis behavior patterns in complex systems

    by Ondrej Hovorka, Gary G. Friedman

    Many complex systems such as magnets, shape memory alloys, as well as socioeconomic and biological systems are known to display hysteresis. This inherently irreversible process differs from the other irreversible processes most often addressed in literature by the memory that persists long after the external parameters stop changing. In general, hysteresis is a consequence of multi-scale system dynamics and the existence of many metastable states. Although hysteresis is typically illustrated by closed minor loops, other types of hysteretic trajectories are often observed where closed loops form gradually after several external parameter periods or not at all. The question arises: What in the structure of a system determines these qualitatively different behaviors of hysteretic trajectories?This thesis models complex hysteretic systems using a network of bistable binary elements and investigates network structure induced changes in hysteretic behavior. The main focus is on studying the minor loop formation processes for a single cyclically varying external parameter. Stable minor loops are observed to form at different rates as a function of the number of cycles, depending on the sign of the interactions, disorder level, and on the connectivity and topology of the interaction networks. For certain dense interaction networks, hysteretic trajectories that do not converge to a minor loop after an arbitrarily large number of external parameter periods are discovered. It is shown that their appearance is related to the presence of specific topological structures in the network. Thus, the thesis demonstrates several interesting links between hysteretic behavior and the underlying structure of complex systems.