Jiancheng Liu
Research Subjects
Jiancheng Liu has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Joseph J. Rencis
University of Arkansas
2 shared publications - Kazuo Yamazaki
University of California, Davis
2 shared publications Alexis Pham
University of the Pacific
1 shared publicationAshland Brown
University of the Pacific
1 shared publicationAshland O. Brown
University of the Pacific
1 shared publication- Baoqiang Zhang
Electrical Development Department of R&D Center, CRRC Qingdao Sifang Company, Ltd., Qingdao, China
1 shared publication
Latest Publications
- 10 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (9) , 12718-12730
The Reflux Regulation Methodology of Adapting Transiently-Varying Grounding Impedance for High-Speed Trains Based on Adjustable Resistance Technique
As the unique power-discharging channel for high-speed trains, the ‘train-rail’ mobile coupling grounding system plays a vital role in sending the traction power back to the terrestrial substations, through the electrical contact between the rotating wheel and the steel rail. The whole system is composed of two kinds of grounding modes: working grounding is in charge of draining the traction power into the rail track; the protective grounding provides the reference grounding potential for the vehicle-mounted equipment. Different from the fixed terrestrial grounding technique normally implemented in power system, when the relative motion occurs between the train and the rail, both the ‘catenary-to-train’ and ‘train-to-ground’ impedances vary transiently, which may lead to the current flowing through each grounding wheel varying unpredictably. Herein, the ‘catenary-train-rail’ mobile coupling grounding model was built based on the equivalent circuit modeling technique for evaluating the transiently-varying tendency of the grounding impedances and currents flowing through each grounding wheel. To cope with different operational conditions, the adjustable grounding impedance methodology is firstly proposed for adapting the unpredictable variation of the grounding impedance, when the relative motion occurs between the train and the rail. Ultimately, the validity of the novel grounding system applying the adjustable grounding impedance technology is verified under different operational conditions, with the consideration of both TB current and voltage.
- 10 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 73 (9) , 12718-12730
The Reflux Regulation Methodology of Adapting Transiently-Varying Grounding Impedance for High-Speed Trains Based on Adjustable Resistance Technique
As the unique power-discharging channel for high-speed trains, the ‘train-rail’ mobile coupling grounding system plays a vital role in sending the traction power back to the terrestrial substations, through the electrical contact between the rotating wheel and the steel rail. The whole system is composed of two kinds of grounding modes: working grounding is in charge of draining the traction power into the rail track; the protective grounding provides the reference grounding potential for the vehicle-mounted equipment. Different from the fixed terrestrial grounding technique normally implemented in power system, when the relative motion occurs between the train and the rail, both the ‘catenary-to-train’ and ‘train-to-ground’ impedances vary transiently, which may lead to the current flowing through each grounding wheel varying unpredictably. Herein, the ‘catenary-train-rail’ mobile coupling grounding model was built based on the equivalent circuit modeling technique for evaluating the transiently-varying tendency of the grounding impedances and currents flowing through each grounding wheel. To cope with different operational conditions, the adjustable grounding impedance methodology is firstly proposed for adapting the unpredictable variation of the grounding impedance, when the relative motion occurs between the train and the rail. Ultimately, the validity of the novel grounding system applying the adjustable grounding impedance technology is verified under different operational conditions, with the consideration of both TB current and voltage.
- Open Access
- 1 November 2020
- Published by Korean Society of Environmental Engineering in Journal of Korean Society of Environmental Engineers
- Vol. 42 (11) , 570-579
Analysis of Key Technologies for Industrialized Treatment of Fatty Acid High-Salinity Organic Wastewater
- 1 November 2020
- Published by Korean Society of Environmental Engineering in Journal of Korean Society of Environmental Engineers
- Vol. 42 (11) , 570-579
Open AccessAnalysis of Key Technologies for Industrialized Treatment of Fatty Acid High-Salinity Organic Wastewater
- Open Access
- 11 September 2020
- Published by American Society for Engineering Education
- p. 25.752.1-25.752.26
Improving Student Learning Using Finite Element Learning Modules: An Update in Research Findings
- 11 September 2020
- Published by American Society for Engineering Education
- p. 25.752.1-25.752.26
Open AccessImproving Student Learning Using Finite Element Learning Modules: An Update in Research Findings
- Open Access
- 3 September 2020
- Published by American Society for Engineering Education
- p. 15.1110.1-15.1110.23
Structured Process For Writing, Revising, And Assessing Multiple Choice Quizzes
- 3 September 2020
- Published by American Society for Engineering Education
- p. 15.1110.1-15.1110.23
Open AccessStructured Process For Writing, Revising, And Assessing Multiple Choice Quizzes
- 14 November 2014
- Published by ASME International
Theoretical and Experimental Research on Design of Non-Resonant Gear Transformer
Honing process is widely used to improve the surface finish of hardened gears. The existing challenging for this manufacturing process includes its low efficiency and excessive forces exerted on both of engaged gears and tools. Ultrasonic assisted honing has a number of superior advantages over the traditional methods. This paper presents a new theoretical method for the parameter determination of non-resonant gear transformer, which is the key component of ultrasonic assisted honing systems. A mathematical model for the ultrasonic assisted honing system is first established and solved with different design parameters by using the numerical method. The numerated results then are verified by the FEM analysis and experiments. It is found that the proposed method is effective and useful. The details will be addressed in the paper.
- 14 November 2014
- Published by ASME International
Theoretical and Experimental Research on Design of Non-Resonant Gear Transformer
Honing process is widely used to improve the surface finish of hardened gears. The existing challenging for this manufacturing process includes its low efficiency and excessive forces exerted on both of engaged gears and tools. Ultrasonic assisted honing has a number of superior advantages over the traditional methods. This paper presents a new theoretical method for the parameter determination of non-resonant gear transformer, which is the key component of ultrasonic assisted honing systems. A mathematical model for the ultrasonic assisted honing system is first established and solved with different design parameters by using the numerical method. The numerated results then are verified by the FEM analysis and experiments. It is found that the proposed method is effective and useful. The details will be addressed in the paper.
- 11 July 2002
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 124 (3) , 515-522
A Reflective Fiber Optic Sensor for Surface Roughness In-Process Measurement
The paper deals with the development of a fiber optic sensor for surface roughness measurement. A new method for the calculation of reflection light intensity is proposed. By numerically counting the amount of reflection light rays from a measured surface, the relationship between the reflection light intensity and the surface roughness can be found. The simulation method is useful in understanding the effects of the sensor probe structure and the component parameters on the performance of the sensor such that an optimum sensor design can be obtained. A fiber optic sensor probe for surface roughness measurement was designed and fabricated using the results obtained by simulation. Experimental results show that the prototype sensor probe has high resolution and sensitivity for ground and milled surfaces with the roughness value (Ra) of 0.1μm∼3.2μm. The experimental results also show that the simulation method is accurate, and hence useful in designing fiber optic sensors. The simulation procedure and feasibility of the simulation method as well as the experimental results obtained from the prototype sensor probe are presented in this paper.
- 11 July 2002
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 124 (3) , 515-522
A Reflective Fiber Optic Sensor for Surface Roughness In-Process Measurement
The paper deals with the development of a fiber optic sensor for surface roughness measurement. A new method for the calculation of reflection light intensity is proposed. By numerically counting the amount of reflection light rays from a measured surface, the relationship between the reflection light intensity and the surface roughness can be found. The simulation method is useful in understanding the effects of the sensor probe structure and the component parameters on the performance of the sensor such that an optimum sensor design can be obtained. A fiber optic sensor probe for surface roughness measurement was designed and fabricated using the results obtained by simulation. Experimental results show that the prototype sensor probe has high resolution and sensitivity for ground and milled surfaces with the roughness value (Ra) of 0.1μm∼3.2μm. The experimental results also show that the simulation method is accurate, and hence useful in designing fiber optic sensors. The simulation procedure and feasibility of the simulation method as well as the experimental results obtained from the prototype sensor probe are presented in this paper.
- 2 June 1998
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
In-Process Tool Utilization Analysis Based Machining Simulation
The study aims at analyzing the tool utilization by using a real-time machining simulation and investigating the behavior of the parameters which affect the tool wear based on the results of the analysis. In this study, the method of calculation of parameters which are necessary to predict the tool wear by using Z-map based machining simulation is developed. Furthermore, the possibility of estimating the tool wear from the results of the simulation was also examined by performing the real cutting experiments.
- 2 June 1998
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
In-Process Tool Utilization Analysis Based Machining Simulation
The study aims at analyzing the tool utilization by using a real-time machining simulation and investigating the behavior of the parameters which affect the tool wear based on the results of the analysis. In this study, the method of calculation of parameters which are necessary to predict the tool wear by using Z-map based machining simulation is developed. Furthermore, the possibility of estimating the tool wear from the results of the simulation was also examined by performing the real cutting experiments.