GTGabriel Jácomo de Paula Tonon

Gabriel Jácomo de Paula Tonon

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gabriel Jácomo de Paula Tonon has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Synthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries

    by Glenda Ribeiro de Barros Silveira Lacerda, Luiz P. Fagundes dos Santos, Nathany Lopes Oliveira Sousa, Gabriel Jácomo de Paula Tonon, Maria Luiza M. Rocco, Tulio Matencio, Hállen Daniel Rezende Calado, Paulo F. Ribeiro Ortega, Garbas Anacleto dos Santos Junior

    A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in an aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al3+ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g−1 at 0.10, 0.25, and 0.50 A g−1, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al3+ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.

  • Open Access

    Synthesis and Application of P(EDOT-co-Py)@MWCNT Hybrid as Cathode Electrode for Aqueous Aluminum-Ion Batteries

    by Glenda Ribeiro de Barros Silveira Lacerda, Luiz Paulo Fagundes dos Santos, Nathany Lopes de Oliveira Sousa, Gabriel Jácomo de Paula Tonon, Maria Luiza Miranda Rocco, Tulio Matencio, Hállen Daniel Rezende Calado, Paulo Fernando Riberiro Ortega, Garbas Anacleto dos Santos Junior

    A hybrid material based on the copolymerization of EDOT (3,4-ethylenedioxythiophene) and Py (pyrrole), 1:1 monomer ratio, onto multi-walled carbon nanotubes (MWCNTs) was synthesized through a multistep functionalization approach. The resulting P(EDOT-co-Py)@MWCNT hybrid, poly(3,4-ethylenedioxythiophene-co-pyrrol)@MWCNT hybrid, was characterized by Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). These characterizations confirmed the successive functionalization steps, the effective anchoring of the monomers, and the subsequent formation of the copolymer. Transmission electron microscopy (TEM) images revealed a homogeneous polymer coating along the nanotube surface, while preserving the structural integrity of the MWCNTs throughout the functionalization and polymerization processes. The P(EDOT-co-Py)@MWCNT hybrid was evaluated as an active electrode material for aluminum-ion storage in aqueous aluminum sulfate electrolyte. The system exhibited two distinct charge-storage mechanisms: at high current densities, proton surface adsorption dominated, whereas at lower rates, a faradaic contribution associated with polymer chain redox activity and the reversible extraction/insertion of Al³⁺ became prevalent. The hybrid electrode delivered high specific capacities, reaching 200.6, 106.3, and 44.3 mAh g⁻¹ at 0.10, 0.25, and 0.50 A g⁻¹, respectively. These values are comparable to—or even exceed—those reported for similar cathodic materials designed for Al³⁺ storage, highlighting P(EDOT-co-Py)@MWCNT hybrid as a highly promising cathode candidate for aqueous aluminum-ion energy-storage systems.

  • Open Access

    High-Performance Dual-Redox-Mediator Supercapacitors Based on Buckypaper Electrodes and Hydrogel Polymer Electrolytes

    by Garbas A. Santos Junior, Kélrie H. A. Mendes, Sarah G. G. de Oliveira, Gabriel J. P. Tonon, Neide P. G. Lopes, Thiago H. R. da Cunha, Mario Guimarães Junior, Rodrigo L. Lavall, Paulo F. R. Ortega

    In recent years, the demand for solid, thin, and flexible energy storage devices has surged in modern consumer electronics, which require autonomy and long duration. In this context, hybrid supercapacitors have become strategic, and significant efforts are being made to develop cells with higher energy densities while preserving the power density of conventional supercapacitors. Motivated by these requirements, we report the development of a new high-performance dual-redox-mediator supercapacitor. In this study, cells were constructed using fully moldable buckypapers (BPs), composed of carbon nanotubes and cellulose nanofibers, as electrodes. We evaluated the compatibility of BPs with hydrogel polymer electrolytes, based on 1 mol L−1 H2SO4 and polyvinyl alcohol (PVA), supplemented with different redox species: methylene blue, indigo carmine, and hydroquinone. Solid cells were constructed containing two active redox species to maximize the specific capacity of each electrode. Considering the main results, the dual-redox-mediator supercapacitor exhibits high energy density of 32.0 Wh kg−1 (at 0.8 kW kg−1) and is capable of delivering 25.9 Wh kg−1 at high power demand (4.0 kW kg−1). Stability studies conducted over 10,000 galvanostatic cycles revealed that the PVA polymer matrix benefits the system by inhibiting the crossover of redox species within the cell.


  • Open Access

    High-Performance Dual-Redox-Mediator Supercapacitors Based on Buckypaper Electrodes and Hydrogel Polymer Electrolytes

    by Garbas A. Santos Junior, Kélrie H. A. Mendes, Sarah G. G. de Oliveira, Gabriel J. P. Tonon, Neide P. G. Lopes, Thiago H.R. da Cunha, Mario Guimarães Junior, Rodrigo L. Lavall, Paulo F. R. Ortega

    In recent years, the demand for solid, thin, and flexible energy storage devices has surged in modern consumer electronics, which require autonomy and long duration. In this context, hybrid supercapacitors have become strategic, leading to significant efforts to develop cells with an energy density close to that of batteries, while maintaining the power density of conventional supercapacitors. Motivated by these requirements, we report the development of a new high-performance dual-redox-mediator supercapacitor. In this study, cells were constructed using fully moldable buckypapers (BPs), composed of carbon nanotubes and cellulose nanofibers, as electrodes. We evaluated the compatibility of BPs with hydrogel polymer electrolytes, based on 1 mol L-1 H2SO4 and polyvinyl alcohol (PVA), supplemented with different redox species: methylene blue, indigo carmine, and hydroquinone. Solid cells were constructed containing two active redox species to maximize the specific capacity of each electrode. Considering the main results, the dual-redox-mediator supercapacitor exhibits a high energy density of 32.0 Wh kg-1 (at 0.8 kW kg-1) and is capable of delivering 25.9 Wh kg-1 at high power demands (4.0 kW kg-1). Stability studies conducted over 10,000 galvanostatic cycles revealed that the PVA polymer matrix benefits the system by inhibiting the crossover of redox species within the cell.