Chao Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chao Zheng has a total of 88 co-authors. Here are the top co-authors by number of shared publications:
Jiantuo Gan
Xi’an Technological University
8 shared publications- Yanxia Liu
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
8 shared publications Hongge Pan
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
7 shared publicationsChenchen Li
Xi’an Technological University
6 shared publications- Mingxia Gao
State Key Laboratory of Silicon Materials and School of Materials Science and Engineering
6 shared publications - Shengnan He
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
6 shared publications
Latest Publications
- 9 November 2026
- Published by Wiley in Advanced Materials
Rate Capability of Lithium‐Rich Manganese‐Based Oxide Cathodes: Charge–Discharge Kinetics, Multiscale Bottlenecks, and Dynamic Rate‐Determining Steps
Lithium‐rich manganese‐based oxide (LRMO) cathode materials deliver a reversible specific capacity exceeding 250 mAh g −1 through synergistic anionic and cationic redox, promising for next‐generation high‐energy‐density batteries, yet their poor rate capability remains a critical barrier to practical deployment, particularly for fast‐charging applications. This review deconstructs rate‐limiting mechanisms at three levels, namely direct charge‐transport impediments, kinetic sluggishness of anionic redox, and degradation cascade of phase transformations, voltage decay, and microcracking that exacerbates kinetics. A central insight is that the rate‐determining step (RDS) shifts from electron‐transfer to ion‐diffusion dominance, governed by the exchange current density ( j 0 ) and the limiting current density ( j d ). Modification strategies are classified into two threads, kinetic enhancement by shortening diffusion paths and lowering migration barriers, and structural stabilization by reinforcing bonds and suppressing oxygen release. Importantly, the often‐overlooked charging kinetics are critically assessed, as the asymmetric nature of anionic redox imposes a more severe bottleneck for fast charging than for high‐rate discharging. Methodological limitations in cross‐study C‐rate comparisons, arising from variations in electrode loading and testing protocols, are also examined to enable more rigorous evaluation of reported performance. This review ultimately provides a theoretical foundation for rational design of high‐rate LRMO cathodes toward practical energy storage applications.
- 9 November 2026
- Published by Wiley in Advanced Materials
Rate Capability of Lithium‐Rich Manganese‐Based Oxide Cathodes: Charge–Discharge Kinetics, Multiscale Bottlenecks, and Dynamic Rate‐Determining Steps
Lithium‐rich manganese‐based oxide (LRMO) cathode materials deliver a reversible specific capacity exceeding 250 mAh g −1 through synergistic anionic and cationic redox, promising for next‐generation high‐energy‐density batteries, yet their poor rate capability remains a critical barrier to practical deployment, particularly for fast‐charging applications. This review deconstructs rate‐limiting mechanisms at three levels, namely direct charge‐transport impediments, kinetic sluggishness of anionic redox, and degradation cascade of phase transformations, voltage decay, and microcracking that exacerbates kinetics. A central insight is that the rate‐determining step (RDS) shifts from electron‐transfer to ion‐diffusion dominance, governed by the exchange current density ( j 0 ) and the limiting current density ( j d ). Modification strategies are classified into two threads, kinetic enhancement by shortening diffusion paths and lowering migration barriers, and structural stabilization by reinforcing bonds and suppressing oxygen release. Importantly, the often‐overlooked charging kinetics are critically assessed, as the asymmetric nature of anionic redox imposes a more severe bottleneck for fast charging than for high‐rate discharging. Methodological limitations in cross‐study C‐rate comparisons, arising from variations in electrode loading and testing protocols, are also examined to enable more rigorous evaluation of reported performance. This review ultimately provides a theoretical foundation for rational design of high‐rate LRMO cathodes toward practical energy storage applications.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (11) , 7304-7317
Diagnosis of Mechanisms of Kinetics in Lithium-Rich Manganese-Based Cathode Materials
The rate-determining step (RDS), which determines rate capability in lithium-rich manganese-based oxide (LRMO) cathode materials, remains unclear. In this work, we establish a quantitative diagnostic method for the RDS in LRMOs using in-situ electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) at different states of charge (SOC) and C-rates. From our results, the SOC determines the intrinsic bottleneck of the RDS, while the C-rate drives the transition from single-step to mixed control. Upon discharging to 4.4 V, the RDS is dominated by electron transfer at the interface accompanied by layered-to-spinel phase transition, whereas it is strongly influenced by solid-state diffusion in the bulk with depletion of Li vacancies arising from Jahn–Teller distortion when discharging to 3.0 V. Furthermore, Li+ diffusion, instead of charge transfer, plays a major part in the RDS of LRMOs when the C-rates are increased. These findings establish quantitative criteria for designing future cathode materials.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (11) , 7304-7317
Diagnosis of Mechanisms of Kinetics in Lithium-Rich Manganese-Based Cathode Materials
The rate-determining step (RDS), which determines rate capability in lithium-rich manganese-based oxide (LRMO) cathode materials, remains unclear. In this work, we establish a quantitative diagnostic method for the RDS in LRMOs using in-situ electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) at different states of charge (SOC) and C-rates. From our results, the SOC determines the intrinsic bottleneck of the RDS, while the C-rate drives the transition from single-step to mixed control. Upon discharging to 4.4 V, the RDS is dominated by electron transfer at the interface accompanied by layered-to-spinel phase transition, whereas it is strongly influenced by solid-state diffusion in the bulk with depletion of Li vacancies arising from Jahn–Teller distortion when discharging to 3.0 V. Furthermore, Li+ diffusion, instead of charge transfer, plays a major part in the RDS of LRMOs when the C-rates are increased. These findings establish quantitative criteria for designing future cathode materials.
Composition‐Driven Strain Self‐Organization for Stable Li‐Rich Cathodes
Lithium‐rich manganese‐based oxides (LRMOs) exhibit exceptional specific capacity owing to their unique combination of cationic and anionic redox activities, rendering them widely recognized as one of the most promising cathode materials for high‐energy‐density lithium‐ion batteries. However, their cycling stability is severely compromised by structural degradation arising from coupled electrochemical‐mechanical effects, including oxygen release, transition metal migration, and cumulative lattice strain upon repeated (de)lithiation cycles. Herein, a composition‐driven strain self‐organization strategy is proposed for LRMOs, conceptually inspired by the strain‐buffering function of the mortar layers in nacre. By establishing a periodic alternation of tensile and compressive regions, the strain‐buffering corrugation is constructed. Such an architecture effectively absorbs volume strain through cooperative microregional deformation, while the associated reversible dislocation evolution serves to avoid the accumulation of irreversible plastic strain. As a result, the structural reversibility and electrochemical performance in the modified LRMO are significantly improved. This work introduces a strain architecture design that imparts the superior mechanical features of natural nacre to electrochemical energy storage materials, opening a new avenue for the rational design of high‐stability Li‐rich Mn‐based cathodes.
Composition‐Driven Strain Self‐Organization for Stable Li‐Rich Cathodes
Lithium‐rich manganese‐based oxides (LRMOs) exhibit exceptional specific capacity owing to their unique combination of cationic and anionic redox activities, rendering them widely recognized as one of the most promising cathode materials for high‐energy‐density lithium‐ion batteries. However, their cycling stability is severely compromised by structural degradation arising from coupled electrochemical‐mechanical effects, including oxygen release, transition metal migration, and cumulative lattice strain upon repeated (de)lithiation cycles. Herein, a composition‐driven strain self‐organization strategy is proposed for LRMOs, conceptually inspired by the strain‐buffering function of the mortar layers in nacre. By establishing a periodic alternation of tensile and compressive regions, the strain‐buffering corrugation is constructed. Such an architecture effectively absorbs volume strain through cooperative microregional deformation, while the associated reversible dislocation evolution serves to avoid the accumulation of irreversible plastic strain. As a result, the structural reversibility and electrochemical performance in the modified LRMO are significantly improved. This work introduces a strain architecture design that imparts the superior mechanical features of natural nacre to electrochemical energy storage materials, opening a new avenue for the rational design of high‐stability Li‐rich Mn‐based cathodes.
Carbon‐Based Materials Enhancing Hydrogen Storage Performance of Magnesium Hydride: Mechanisms, Multidimensional Performance Regulation and Future Perspectives
This review summarizes recent advances and challenges in enhancing the hydrogen storage performance of magnesium hydride (MgH 2 ) through carbon modification strategies. Although MgH 2 possesses high hydrogen capacity and favorable safety characteristics, its practical application is limited by thermodynamic stability, sluggish kinetics, and poor cycling durability. Carbon materials provide multifunctional regulation through structural confinement, improved transport properties, interfacial electronic modulation, and defect engineering, enabling simultaneous optimization of hydrogen sorption kinetics, thermodynamics, and cycling stability. Recent progress in carbon materials with different dimensional structures and their synergistic coupling with metal catalysts is discussed, with emphasis on the underlying mechanisms, performance regulation, and future development challenges. These carbon‐based coupling strategies provide promising opportunities for developing high‐performance MgH 2 ‐based hydrogen storage systems for fuel‐cell vehicles, renewable energy storage, and portable power applications.
Carbon‐Based Materials Enhancing Hydrogen Storage Performance of Magnesium Hydride: Mechanisms, Multidimensional Performance Regulation and Future Perspectives
This review summarizes recent advances and challenges in enhancing the hydrogen storage performance of magnesium hydride (MgH 2 ) through carbon modification strategies. Although MgH 2 possesses high hydrogen capacity and favorable safety characteristics, its practical application is limited by thermodynamic stability, sluggish kinetics, and poor cycling durability. Carbon materials provide multifunctional regulation through structural confinement, improved transport properties, interfacial electronic modulation, and defect engineering, enabling simultaneous optimization of hydrogen sorption kinetics, thermodynamics, and cycling stability. Recent progress in carbon materials with different dimensional structures and their synergistic coupling with metal catalysts is discussed, with emphasis on the underlying mechanisms, performance regulation, and future development challenges. These carbon‐based coupling strategies provide promising opportunities for developing high‐performance MgH 2 ‐based hydrogen storage systems for fuel‐cell vehicles, renewable energy storage, and portable power applications.
- 12 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (85)
Stabilization of Zinc Anodes in Aqueous Zinc‐Ion Batteries: From Challenges and Strategies to a Bibliometric Perspective
Aqueous zinc‐ion batteries (AZIBs) are promising candidates for large‐scale electrochemical energy storage, yet their practical viability remains fundamentally constrained by coupled failure processes at the metallic zinc anode, including uncontrolled dendrite growth, hydrogen evolution, and interfacial corrosion that are systematically underestimated under the idealized testing conditions prevalent in the literature. Unlike existing reviews that evaluate stabilization strategies solely by reported cycling metrics, this work critically assesses three major directions (current collector design, artificial solid electrolyte interphase construction, and electrolyte engineering) by the physical and chemical variables each regulates, including nucleation overpotential, Zn 2+ flux distribution, desolvation barrier, interfacial water activity, and protective‐layer mechanical integrity. Bibliometric analysis further reveals publication trends, institutional contributors, and underexplored research hotspots over the past decade. Finally, forward‐looking perspectives are proposed spanning mechanism‐constrained AI‐assisted descriptor design, multimodal operando decoupling of dendrite and corrosion contributions, failure‐mode identification under extreme and mass‐transport‐limited conditions, and ion‐economy design at the full‐cell scale. Together, these contributions aim to reframe the evaluation standards of the AZIB field and provide a systematic, mechanism‐to‐application reference for the rational design of highly stable and reversible zinc anodes.
- 12 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (85)
Stabilization of Zinc Anodes in Aqueous Zinc‐Ion Batteries: From Challenges and Strategies to a Bibliometric Perspective
Aqueous zinc‐ion batteries (AZIBs) are promising candidates for large‐scale electrochemical energy storage, yet their practical viability remains fundamentally constrained by coupled failure processes at the metallic zinc anode, including uncontrolled dendrite growth, hydrogen evolution, and interfacial corrosion that are systematically underestimated under the idealized testing conditions prevalent in the literature. Unlike existing reviews that evaluate stabilization strategies solely by reported cycling metrics, this work critically assesses three major directions (current collector design, artificial solid electrolyte interphase construction, and electrolyte engineering) by the physical and chemical variables each regulates, including nucleation overpotential, Zn 2+ flux distribution, desolvation barrier, interfacial water activity, and protective‐layer mechanical integrity. Bibliometric analysis further reveals publication trends, institutional contributors, and underexplored research hotspots over the past decade. Finally, forward‐looking perspectives are proposed spanning mechanism‐constrained AI‐assisted descriptor design, multimodal operando decoupling of dendrite and corrosion contributions, failure‐mode identification under extreme and mass‐transport‐limited conditions, and ion‐economy design at the full‐cell scale. Together, these contributions aim to reframe the evaluation standards of the AZIB field and provide a systematic, mechanism‐to‐application reference for the rational design of highly stable and reversible zinc anodes.
- 2 September 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (10) , 6764-6775
Intelligent Response and Dynamic Stress Equilibrium Structure Endow Lithium-Rich Oxide Cathodes with Long Cycle Life
Lithium-rich oxides (LROs) deliver an energy density of over 1000 Wh kg−1 for lithium-ion battery cathode applications, yet cycling-induced stress accumulation triggers structural degradation and poor cyclic stability. Herein, hierarchical twin structures are prefabricated in LROs. Prestress at twin boundaries forms interlaced stress networks to adaptively accommodate tensile/compressive strains upon cycling and dissipate localized stress concentration. The self-adaptive twin structure tolerates cyclic volume fluctuation, preserving the layered framework against irreversible spinel/rock-salt phase transition during long-term structural relaxation. The twin-modified LRO retains 94.98% capacity after 500 cycles (1 C) and 80.79% after 800 cycles, with 155.31 mAh g−1 at 5 C. The pouch cell delivers 12.59 Ah discharge capacity and maintains 84.83% capacity after 49 cycles. This work offers a strategy to tune electrochemo-mechanical properties for designing cathode materials.
- 2 September 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (10) , 6764-6775
Intelligent Response and Dynamic Stress Equilibrium Structure Endow Lithium-Rich Oxide Cathodes with Long Cycle Life
Lithium-rich oxides (LROs) deliver an energy density of over 1000 Wh kg−1 for lithium-ion battery cathode applications, yet cycling-induced stress accumulation triggers structural degradation and poor cyclic stability. Herein, hierarchical twin structures are prefabricated in LROs. Prestress at twin boundaries forms interlaced stress networks to adaptively accommodate tensile/compressive strains upon cycling and dissipate localized stress concentration. The self-adaptive twin structure tolerates cyclic volume fluctuation, preserving the layered framework against irreversible spinel/rock-salt phase transition during long-term structural relaxation. The twin-modified LRO retains 94.98% capacity after 500 cycles (1 C) and 80.79% after 800 cycles, with 155.31 mAh g−1 at 5 C. The pouch cell delivers 12.59 Ah discharge capacity and maintains 84.83% capacity after 49 cycles. This work offers a strategy to tune electrochemo-mechanical properties for designing cathode materials.
- Open Access
- 8 August 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (35) , e71402
3D Micro‐Network Li/Al 4 Li 9 Composite Anodes Constructed by One‐Step Melt‐Spinning for High Energy Density Lithium Metal Batteries
Lithium‐metal anodes are hindered by inhomogeneous lithium plating/stripping, interfacial side reactions, and volume expansion. The lithium alloy anodes are considered an effective strategy to resolve these problems, but they suffer from structural degradation during cycling. Herein, a 3D micro‐network Li/Al 4 Li 9 composite anode is fabricated via one‐step melt‐spinning. The microstructure evolution of the alloy ribbons is studied systematically by tuning the cooling conditions. Ultimately, a uniform Li/Al 4 Li 9 composite anode with a 3D micro‐network is achieved at a copper roller speed of 2200 rpm. The intrinsic Li/Al 4 Li 9 composite anode structure provides synergistic functions: first, the interconnected micro‐network provides continuous electron/ion transport pathways and abundant reaction interfaces, which lowers the nucleation barrier and uniform lithium plating/stripping; second, the Li/Al 4 Li 9 composite anode with Al 4 Li 9 skeleton shows high Young's modulus, which buffers volume expansion and uniform stress distribution. In situ optical microscopy and post‐cycling SEM images confirm the Li/Al 4 Li 9 composite anode exhibits excellent mitigate structural degradation ability. The Li/Al 4 Li 9 ||Li/Al 4 Li 9 cells in ether‐based electrolyte demonstrate stable cycling for 1600 h at 1 mA cm − 2 , 1 mAh cm − 2 , and Li/Al 4 Li 9 ||LiFePO 4 cells in carbonate‐based electrolyte retain 81.7% capacity after 204 cycles at 0.5 C. Impressively, the Li/Al 4 Li 9 composite anode is a promising anode for high‐energy‐density lithium metal batteries.
- 8 August 2026
- Published by Wiley in Advanced Energy Materials
- Vol. 16 (35) , e71402
Open Access3D Micro‐Network Li/Al 4 Li 9 Composite Anodes Constructed by One‐Step Melt‐Spinning for High Energy Density Lithium Metal Batteries
Lithium‐metal anodes are hindered by inhomogeneous lithium plating/stripping, interfacial side reactions, and volume expansion. The lithium alloy anodes are considered an effective strategy to resolve these problems, but they suffer from structural degradation during cycling. Herein, a 3D micro‐network Li/Al 4 Li 9 composite anode is fabricated via one‐step melt‐spinning. The microstructure evolution of the alloy ribbons is studied systematically by tuning the cooling conditions. Ultimately, a uniform Li/Al 4 Li 9 composite anode with a 3D micro‐network is achieved at a copper roller speed of 2200 rpm. The intrinsic Li/Al 4 Li 9 composite anode structure provides synergistic functions: first, the interconnected micro‐network provides continuous electron/ion transport pathways and abundant reaction interfaces, which lowers the nucleation barrier and uniform lithium plating/stripping; second, the Li/Al 4 Li 9 composite anode with Al 4 Li 9 skeleton shows high Young's modulus, which buffers volume expansion and uniform stress distribution. In situ optical microscopy and post‐cycling SEM images confirm the Li/Al 4 Li 9 composite anode exhibits excellent mitigate structural degradation ability. The Li/Al 4 Li 9 ||Li/Al 4 Li 9 cells in ether‐based electrolyte demonstrate stable cycling for 1600 h at 1 mA cm − 2 , 1 mAh cm − 2 , and Li/Al 4 Li 9 ||LiFePO 4 cells in carbonate‐based electrolyte retain 81.7% capacity after 204 cycles at 0.5 C. Impressively, the Li/Al 4 Li 9 composite anode is a promising anode for high‐energy‐density lithium metal batteries.
- 18 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (42) , e73712
Regulation Roles of p ‐Block Elements in Lithium Layered Oxide Cathodes: Recent Progress and Perspectives
Layered oxides derived from Li x TM y O 2 (TM: Ni, Co, Mn and etc.), based on the de/intercalation mechanism, have long served as the backbone of lithium‐ion batteries (LIBs) for portable electronics, electric vehicles, and energy storage. However, the unstable structural evolution, sluggish diffusion kinetics, and detrimental interface parasitic reaction deteriorate their electrochemical performance. Due to p ‐block elements with unique electronic structures, the substitution in Li x TM y O 2 with p ‐block elements has become one of the mainstream practices. Therefore, clarifying the relationship among substitution, structure and performance is critical for rational design of high‐performance LIBs. However, a systematic review focusing on regulation roles of p ‐block elements in Li x TM y O 2 cathodes is lacking. Seeking to systematically understand the interaction between p ‐block elements with the matrix of Li x TM y O 2 cathodes, herein, we firstly outline the structure and mechanisms of Li x TM y O 2 cathodes, then highlight the internal structural degradation and external interface instability. And the performance enhancement mechanisms are emphasized in detail. Secondly, according to the order of the main group, a comprehensive review on the progress of p ‐block element substitution in Li x TM y O 2 are provided. Finally, the challenges and future perspectives are figured out, which can shed light on the design guideline of Li x TM y O 2 cathodes in the future.
- 18 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (42) , e73712
Regulation Roles of p ‐Block Elements in Lithium Layered Oxide Cathodes: Recent Progress and Perspectives
Layered oxides derived from Li x TM y O 2 (TM: Ni, Co, Mn and etc.), based on the de/intercalation mechanism, have long served as the backbone of lithium‐ion batteries (LIBs) for portable electronics, electric vehicles, and energy storage. However, the unstable structural evolution, sluggish diffusion kinetics, and detrimental interface parasitic reaction deteriorate their electrochemical performance. Due to p ‐block elements with unique electronic structures, the substitution in Li x TM y O 2 with p ‐block elements has become one of the mainstream practices. Therefore, clarifying the relationship among substitution, structure and performance is critical for rational design of high‐performance LIBs. However, a systematic review focusing on regulation roles of p ‐block elements in Li x TM y O 2 cathodes is lacking. Seeking to systematically understand the interaction between p ‐block elements with the matrix of Li x TM y O 2 cathodes, herein, we firstly outline the structure and mechanisms of Li x TM y O 2 cathodes, then highlight the internal structural degradation and external interface instability. And the performance enhancement mechanisms are emphasized in detail. Secondly, according to the order of the main group, a comprehensive review on the progress of p ‐block element substitution in Li x TM y O 2 are provided. Finally, the challenges and future perspectives are figured out, which can shed light on the design guideline of Li x TM y O 2 cathodes in the future.
- 17 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (8) , 12782-12798
Engineering Oxygen Vacancy Distribution for Enhanced Structural Stability in Lithium-Rich Manganese-Based Oxide Cathode Materials
Lithium-rich manganese-based oxides (LRMOs) exhibit high specific capacity exceeding 250 mAh g-1, making them promising candidates for next-generation lithium-ion batteries. However, oxygen evolution during cycling destabilizes the crystal structure, leading to capacity fading. By precisely controlling the oxygen/nitrogen (O2/N2) ratio during sintering, this work achieves a significant reduction in bulk oxygen vacancy content and enhances lattice oxygen stability. The O50 sample sintered under 50%O2/50%N2 atmosphere ratio demonstrates exceptional performance with 96.7% capacity retention (216.5 mAh g-1) after 300 cycles at 1 C rate (1 C = 200 mA g-1). Remarkably, it maintains delivering 155.0 mAh g-1 at 5 C and 133.2 mAh g-1 at 10 C, showing superior rate capability. Structural characterization reveals this atmosphere-controlled sintering strategy simultaneously enhances bulk oxygen stability and surface oxygen vacancy generation, providing a simple yet effective strategy for the design of high-performance LRMOs.
- 17 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (8) , 12782-12798
Engineering Oxygen Vacancy Distribution for Enhanced Structural Stability in Lithium-Rich Manganese-Based Oxide Cathode Materials
Lithium-rich manganese-based oxides (LRMOs) exhibit high specific capacity exceeding 250 mAh g-1, making them promising candidates for next-generation lithium-ion batteries. However, oxygen evolution during cycling destabilizes the crystal structure, leading to capacity fading. By precisely controlling the oxygen/nitrogen (O2/N2) ratio during sintering, this work achieves a significant reduction in bulk oxygen vacancy content and enhances lattice oxygen stability. The O50 sample sintered under 50%O2/50%N2 atmosphere ratio demonstrates exceptional performance with 96.7% capacity retention (216.5 mAh g-1) after 300 cycles at 1 C rate (1 C = 200 mA g-1). Remarkably, it maintains delivering 155.0 mAh g-1 at 5 C and 133.2 mAh g-1 at 10 C, showing superior rate capability. Structural characterization reveals this atmosphere-controlled sintering strategy simultaneously enhances bulk oxygen stability and surface oxygen vacancy generation, providing a simple yet effective strategy for the design of high-performance LRMOs.
- Top Cited Papers
- 26 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (5) , 4152-4165
Dynamic Restructuring of Carbon Nanotube-Supported High-Entropy Alloys Enabling Efficient Oxygen Electrocatalysis
Oxygen electrocatalysis, mainly including the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), is a cornerstone in rechargeable metal-air batteries. However, these reactions are sluggish due to the four-electron transfer process and the linear scaling relationship of the intermediate binding strength. Herein, we have rationally developed a hybrid composite consisting of high-entropy alloy nanoparticles (NPs) encapsulated in carbon nanotubes (CNTs) to significantly improve the electrocatalytic performance. In situ spectroscopy investigations and theoretical calculations disclose that high-entropy alloys undergo dynamic reconstruction to form MOOH and M-OH (M represents metallic elements) as the authentic active species in the ORR and OER processes, respectively. Specifically, Fe, Co, Mn, and Cu regulate the charge transfer between the Ni-O bonds in MOOH for the OER, while the high-entropy effect and surface-absorbed OH groups coregulate the d-band center of surface Co for the efficient ORR. Accordingly, the as-developed FeCoNiMnCu@CNTs exhibits activity for both ORR and OER, with an ultralow voltage gap of 0.626 V between the half-wave potential of ORR and the OER potential at 10 mA cm-2. Moreover, Zn-air batteries with FeCoNiMnCu@CNTs exhibit a power density of 131.3 mW cm-2 and robust stability.
- 26 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (5) , 4152-4165
Top Cited PapersDynamic Restructuring of Carbon Nanotube-Supported High-Entropy Alloys Enabling Efficient Oxygen Electrocatalysis
Oxygen electrocatalysis, mainly including the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), is a cornerstone in rechargeable metal-air batteries. However, these reactions are sluggish due to the four-electron transfer process and the linear scaling relationship of the intermediate binding strength. Herein, we have rationally developed a hybrid composite consisting of high-entropy alloy nanoparticles (NPs) encapsulated in carbon nanotubes (CNTs) to significantly improve the electrocatalytic performance. In situ spectroscopy investigations and theoretical calculations disclose that high-entropy alloys undergo dynamic reconstruction to form MOOH and M-OH (M represents metallic elements) as the authentic active species in the ORR and OER processes, respectively. Specifically, Fe, Co, Mn, and Cu regulate the charge transfer between the Ni-O bonds in MOOH for the OER, while the high-entropy effect and surface-absorbed OH groups coregulate the d-band center of surface Co for the efficient ORR. Accordingly, the as-developed FeCoNiMnCu@CNTs exhibits activity for both ORR and OER, with an ultralow voltage gap of 0.626 V between the half-wave potential of ORR and the OER potential at 10 mA cm-2. Moreover, Zn-air batteries with FeCoNiMnCu@CNTs exhibit a power density of 131.3 mW cm-2 and robust stability.