Shengnan He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shengnan He has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Wubin Du
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
7 shared publications - Yanxia Liu
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
7 shared publications - Chao Zheng
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
6 shared publications Hongge Pan
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
6 shared publications- Hongge Pan
Institute of Science and Technology for New Energy Xi'an Technological University Xi'an China
5 shared publications - Mingxia Gao
State Key Laboratory of Silicon Materials and School of Materials Science and Engineering
5 shared publications
Latest Publications
- 18 November 2026
- Published by Wiley in Advanced Materials
Metallurgical Interface Engineering Constructing In Situ Li 3 N‐Enriched Interphase: A Bulk‐Interface Synergy Strategy Toward Practical Silicon Anodes
Silicon anodes are promising for next‐generation lithium‐ion batteries but suffer from volume expansion, unstable solid electrolyte interphase (SEI), and sluggish Li + diffusion. Herein, we report a vacuum‐suspension‐melted (VSM) bulk multiphase integration and interphase modification strategy to address these challenges. Unlike conventional mechanical mixing, VSM constructs a SiSnM (M = Bi, Ni) composite with metallurgically bonded Si/metal interfaces, forming a conductive network that buffers internal stress via atomic‐scale interfacial stress transfer. Simultaneously, a polydopamine‐derived nitrogen‐doped carbon coating transforms in situ into a Li 3 N‐enriched interphase during cycling, which exhibits high ionic/electronic conductivity, accelerates interfacial charge transfer, and suppresses continuous SEI breakdown. The resulting SiSnM@Li 3 N anode delivers 87.3% capacity retention after 1000 cycles at 1.5 A g −1 and >1000 mAh g −1 at 15 A g −1 , with reliable operation from −30°C to 60°C. Stable cycling at 2.5 mg cm −2 confirms practical relevance. Full cells with Li‐rich Mn‐based cathodes show stable performance, and 5 Ah‐level pouch cells deliver 84.7% capacity retention after 300 cycles at 6 A discharge. This work concurrently tackles ionic, electronic, and mechanical constraints, offering a practical path to high‐energy durable Si‐based batteries.
- 18 November 2026
- Published by Wiley in Advanced Materials
Metallurgical Interface Engineering Constructing In Situ Li 3 N‐Enriched Interphase: A Bulk‐Interface Synergy Strategy Toward Practical Silicon Anodes
Silicon anodes are promising for next‐generation lithium‐ion batteries but suffer from volume expansion, unstable solid electrolyte interphase (SEI), and sluggish Li + diffusion. Herein, we report a vacuum‐suspension‐melted (VSM) bulk multiphase integration and interphase modification strategy to address these challenges. Unlike conventional mechanical mixing, VSM constructs a SiSnM (M = Bi, Ni) composite with metallurgically bonded Si/metal interfaces, forming a conductive network that buffers internal stress via atomic‐scale interfacial stress transfer. Simultaneously, a polydopamine‐derived nitrogen‐doped carbon coating transforms in situ into a Li 3 N‐enriched interphase during cycling, which exhibits high ionic/electronic conductivity, accelerates interfacial charge transfer, and suppresses continuous SEI breakdown. The resulting SiSnM@Li 3 N anode delivers 87.3% capacity retention after 1000 cycles at 1.5 A g −1 and >1000 mAh g −1 at 15 A g −1 , with reliable operation from −30°C to 60°C. Stable cycling at 2.5 mg cm −2 confirms practical relevance. Full cells with Li‐rich Mn‐based cathodes show stable performance, and 5 Ah‐level pouch cells deliver 84.7% capacity retention after 300 cycles at 6 A discharge. This work concurrently tackles ionic, electronic, and mechanical constraints, offering a practical path to high‐energy durable Si‐based batteries.
- 9 November 2026
- Published by Wiley in Advanced Materials
Rate Capability of Lithium‐Rich Manganese‐Based Oxide Cathodes: Charge–Discharge Kinetics, Multiscale Bottlenecks, and Dynamic Rate‐Determining Steps
Lithium‐rich manganese‐based oxide (LRMO) cathode materials deliver a reversible specific capacity exceeding 250 mAh g −1 through synergistic anionic and cationic redox, promising for next‐generation high‐energy‐density batteries, yet their poor rate capability remains a critical barrier to practical deployment, particularly for fast‐charging applications. This review deconstructs rate‐limiting mechanisms at three levels, namely direct charge‐transport impediments, kinetic sluggishness of anionic redox, and degradation cascade of phase transformations, voltage decay, and microcracking that exacerbates kinetics. A central insight is that the rate‐determining step (RDS) shifts from electron‐transfer to ion‐diffusion dominance, governed by the exchange current density ( j 0 ) and the limiting current density ( j d ). Modification strategies are classified into two threads, kinetic enhancement by shortening diffusion paths and lowering migration barriers, and structural stabilization by reinforcing bonds and suppressing oxygen release. Importantly, the often‐overlooked charging kinetics are critically assessed, as the asymmetric nature of anionic redox imposes a more severe bottleneck for fast charging than for high‐rate discharging. Methodological limitations in cross‐study C‐rate comparisons, arising from variations in electrode loading and testing protocols, are also examined to enable more rigorous evaluation of reported performance. This review ultimately provides a theoretical foundation for rational design of high‐rate LRMO cathodes toward practical energy storage applications.
- 9 November 2026
- Published by Wiley in Advanced Materials
Rate Capability of Lithium‐Rich Manganese‐Based Oxide Cathodes: Charge–Discharge Kinetics, Multiscale Bottlenecks, and Dynamic Rate‐Determining Steps
Lithium‐rich manganese‐based oxide (LRMO) cathode materials deliver a reversible specific capacity exceeding 250 mAh g −1 through synergistic anionic and cationic redox, promising for next‐generation high‐energy‐density batteries, yet their poor rate capability remains a critical barrier to practical deployment, particularly for fast‐charging applications. This review deconstructs rate‐limiting mechanisms at three levels, namely direct charge‐transport impediments, kinetic sluggishness of anionic redox, and degradation cascade of phase transformations, voltage decay, and microcracking that exacerbates kinetics. A central insight is that the rate‐determining step (RDS) shifts from electron‐transfer to ion‐diffusion dominance, governed by the exchange current density ( j 0 ) and the limiting current density ( j d ). Modification strategies are classified into two threads, kinetic enhancement by shortening diffusion paths and lowering migration barriers, and structural stabilization by reinforcing bonds and suppressing oxygen release. Importantly, the often‐overlooked charging kinetics are critically assessed, as the asymmetric nature of anionic redox imposes a more severe bottleneck for fast charging than for high‐rate discharging. Methodological limitations in cross‐study C‐rate comparisons, arising from variations in electrode loading and testing protocols, are also examined to enable more rigorous evaluation of reported performance. This review ultimately provides a theoretical foundation for rational design of high‐rate LRMO cathodes toward practical energy storage applications.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (11) , 7304-7317
Diagnosis of Mechanisms of Kinetics in Lithium-Rich Manganese-Based Cathode Materials
The rate-determining step (RDS), which determines rate capability in lithium-rich manganese-based oxide (LRMO) cathode materials, remains unclear. In this work, we establish a quantitative diagnostic method for the RDS in LRMOs using in-situ electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) at different states of charge (SOC) and C-rates. From our results, the SOC determines the intrinsic bottleneck of the RDS, while the C-rate drives the transition from single-step to mixed control. Upon discharging to 4.4 V, the RDS is dominated by electron transfer at the interface accompanied by layered-to-spinel phase transition, whereas it is strongly influenced by solid-state diffusion in the bulk with depletion of Li vacancies arising from Jahn–Teller distortion when discharging to 3.0 V. Furthermore, Li+ diffusion, instead of charge transfer, plays a major part in the RDS of LRMOs when the C-rates are increased. These findings establish quantitative criteria for designing future cathode materials.
- 3 November 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (11) , 7304-7317
Diagnosis of Mechanisms of Kinetics in Lithium-Rich Manganese-Based Cathode Materials
The rate-determining step (RDS), which determines rate capability in lithium-rich manganese-based oxide (LRMO) cathode materials, remains unclear. In this work, we establish a quantitative diagnostic method for the RDS in LRMOs using in-situ electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) at different states of charge (SOC) and C-rates. From our results, the SOC determines the intrinsic bottleneck of the RDS, while the C-rate drives the transition from single-step to mixed control. Upon discharging to 4.4 V, the RDS is dominated by electron transfer at the interface accompanied by layered-to-spinel phase transition, whereas it is strongly influenced by solid-state diffusion in the bulk with depletion of Li vacancies arising from Jahn–Teller distortion when discharging to 3.0 V. Furthermore, Li+ diffusion, instead of charge transfer, plays a major part in the RDS of LRMOs when the C-rates are increased. These findings establish quantitative criteria for designing future cathode materials.
Composition‐Driven Strain Self‐Organization for Stable Li‐Rich Cathodes
Lithium‐rich manganese‐based oxides (LRMOs) exhibit exceptional specific capacity owing to their unique combination of cationic and anionic redox activities, rendering them widely recognized as one of the most promising cathode materials for high‐energy‐density lithium‐ion batteries. However, their cycling stability is severely compromised by structural degradation arising from coupled electrochemical‐mechanical effects, including oxygen release, transition metal migration, and cumulative lattice strain upon repeated (de)lithiation cycles. Herein, a composition‐driven strain self‐organization strategy is proposed for LRMOs, conceptually inspired by the strain‐buffering function of the mortar layers in nacre. By establishing a periodic alternation of tensile and compressive regions, the strain‐buffering corrugation is constructed. Such an architecture effectively absorbs volume strain through cooperative microregional deformation, while the associated reversible dislocation evolution serves to avoid the accumulation of irreversible plastic strain. As a result, the structural reversibility and electrochemical performance in the modified LRMO are significantly improved. This work introduces a strain architecture design that imparts the superior mechanical features of natural nacre to electrochemical energy storage materials, opening a new avenue for the rational design of high‐stability Li‐rich Mn‐based cathodes.
Composition‐Driven Strain Self‐Organization for Stable Li‐Rich Cathodes
Lithium‐rich manganese‐based oxides (LRMOs) exhibit exceptional specific capacity owing to their unique combination of cationic and anionic redox activities, rendering them widely recognized as one of the most promising cathode materials for high‐energy‐density lithium‐ion batteries. However, their cycling stability is severely compromised by structural degradation arising from coupled electrochemical‐mechanical effects, including oxygen release, transition metal migration, and cumulative lattice strain upon repeated (de)lithiation cycles. Herein, a composition‐driven strain self‐organization strategy is proposed for LRMOs, conceptually inspired by the strain‐buffering function of the mortar layers in nacre. By establishing a periodic alternation of tensile and compressive regions, the strain‐buffering corrugation is constructed. Such an architecture effectively absorbs volume strain through cooperative microregional deformation, while the associated reversible dislocation evolution serves to avoid the accumulation of irreversible plastic strain. As a result, the structural reversibility and electrochemical performance in the modified LRMO are significantly improved. This work introduces a strain architecture design that imparts the superior mechanical features of natural nacre to electrochemical energy storage materials, opening a new avenue for the rational design of high‐stability Li‐rich Mn‐based cathodes.
Pre‐Embedded CNTs Architecture Differentiates Carbon Functions for Kinetics Boosting in All‐Solid‐State Li–S Cathodes
All‐solid‐state lithium–sulfur batteries (ASSLSBs) are promising high‐energy storage systems, yet their performance is severely limited by sluggish cathode kinetics due to the insulating nature of sulfur species and inefficient charge transport within the composite cathode. Herein, a functional‐differentiation strategy via a pre‐embedded carbon nanotubes (CNTs) framework is proposed to enhance the charge transport in sulfide‐based ASSLSB cathodes. The design employs Li 6 PS 5 Cl (LPSC) as an ionic conductor, Ketjen black (KB) for sulfur hosting and short‐range electron transfer, and pre‐embedded CNTs as a long‐range electronic conducting skeleton. Compared with conventional loading‐type and bridging‐type configurations, the framework‐type CNTs‐based cathode exhibits significantly improved charge transport and electrochemical performance. It delivers a discharge capacity of 1438 mAh g −1 at 1 C (2.5 mA cm −2 ), with 91.9% capacity retention after 400 cycles, and maintains 404 mAh g −1 under a high sulfur loading of 9 mg cm −2 . Electrochemical analyses, local electrical mapping, and theoretical simulations reveal that the enhanced kinetics stem from a more homogeneous electronic network, which suppresses charge accumulation and facilitates Li + transport. This work highlights that spatial reconstruction and functional differentiation of carbon components can effectively mitigate kinetic barriers in high‐energy‐density ASSLSBs.
Pre‐Embedded CNTs Architecture Differentiates Carbon Functions for Kinetics Boosting in All‐Solid‐State Li–S Cathodes
All‐solid‐state lithium–sulfur batteries (ASSLSBs) are promising high‐energy storage systems, yet their performance is severely limited by sluggish cathode kinetics due to the insulating nature of sulfur species and inefficient charge transport within the composite cathode. Herein, a functional‐differentiation strategy via a pre‐embedded carbon nanotubes (CNTs) framework is proposed to enhance the charge transport in sulfide‐based ASSLSB cathodes. The design employs Li 6 PS 5 Cl (LPSC) as an ionic conductor, Ketjen black (KB) for sulfur hosting and short‐range electron transfer, and pre‐embedded CNTs as a long‐range electronic conducting skeleton. Compared with conventional loading‐type and bridging‐type configurations, the framework‐type CNTs‐based cathode exhibits significantly improved charge transport and electrochemical performance. It delivers a discharge capacity of 1438 mAh g −1 at 1 C (2.5 mA cm −2 ), with 91.9% capacity retention after 400 cycles, and maintains 404 mAh g −1 under a high sulfur loading of 9 mg cm −2 . Electrochemical analyses, local electrical mapping, and theoretical simulations reveal that the enhanced kinetics stem from a more homogeneous electronic network, which suppresses charge accumulation and facilitates Li + transport. This work highlights that spatial reconstruction and functional differentiation of carbon components can effectively mitigate kinetic barriers in high‐energy‐density ASSLSBs.
- 2 September 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (10) , 6764-6775
Intelligent Response and Dynamic Stress Equilibrium Structure Endow Lithium-Rich Oxide Cathodes with Long Cycle Life
Lithium-rich oxides (LROs) deliver an energy density of over 1000 Wh kg−1 for lithium-ion battery cathode applications, yet cycling-induced stress accumulation triggers structural degradation and poor cyclic stability. Herein, hierarchical twin structures are prefabricated in LROs. Prestress at twin boundaries forms interlaced stress networks to adaptively accommodate tensile/compressive strains upon cycling and dissipate localized stress concentration. The self-adaptive twin structure tolerates cyclic volume fluctuation, preserving the layered framework against irreversible spinel/rock-salt phase transition during long-term structural relaxation. The twin-modified LRO retains 94.98% capacity after 500 cycles (1 C) and 80.79% after 800 cycles, with 155.31 mAh g−1 at 5 C. The pouch cell delivers 12.59 Ah discharge capacity and maintains 84.83% capacity after 49 cycles. This work offers a strategy to tune electrochemo-mechanical properties for designing cathode materials.
- 2 September 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (10) , 6764-6775
Intelligent Response and Dynamic Stress Equilibrium Structure Endow Lithium-Rich Oxide Cathodes with Long Cycle Life
Lithium-rich oxides (LROs) deliver an energy density of over 1000 Wh kg−1 for lithium-ion battery cathode applications, yet cycling-induced stress accumulation triggers structural degradation and poor cyclic stability. Herein, hierarchical twin structures are prefabricated in LROs. Prestress at twin boundaries forms interlaced stress networks to adaptively accommodate tensile/compressive strains upon cycling and dissipate localized stress concentration. The self-adaptive twin structure tolerates cyclic volume fluctuation, preserving the layered framework against irreversible spinel/rock-salt phase transition during long-term structural relaxation. The twin-modified LRO retains 94.98% capacity after 500 cycles (1 C) and 80.79% after 800 cycles, with 155.31 mAh g−1 at 5 C. The pouch cell delivers 12.59 Ah discharge capacity and maintains 84.83% capacity after 49 cycles. This work offers a strategy to tune electrochemo-mechanical properties for designing cathode materials.
- 2 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (43) , e3543240
Geometry‐Guided Screening of Metal/Oxide Heterointerfaces Enables Superior Sodium Metal Batteries at −40 °C
Despite their high theoretical energy density, sodium metal batteries (SMBs) remain limited by unstable interfacial chemistry and sluggish Na + transport kinetics, particularly under ultralow‐temperature conditions. Herein, guided by a geometry‐driven design principle linking structural matching at metal/metal‐oxide heterointerfaces with current density distribution, we identify a Y/Y 2 O 3 heterostructure as an optimal surface modification layer and fabricate it on commercial aluminum foil via magnetron sputtering. The resulting Y/Y 2 O 3 heterojunction, featuring a built‐in electric field and moderate sodiophilicity, homogenizes Na + flux, and directs reversible deposition. Meanwhile, the heterointerface facilitates PF 6 − adsorption, directing interfacial reactions toward the generation of inorganic solid electrolyte interphase components, which contributes to improved interfacial stability under ultralow‐temperature conditions. Consequently, the Y/Y 2 O 3 ‐modified current collector promotes highly reversible Na plating/stripping, enabling Na@Y/Y 2 O 3 @Al||Na 3 V 2 (PO 4 ) 3 full cells to retain robust cycling stability at −40 °C. The Y/Y 2 O 3 heterointerface design provides an effective platform for enabling durable SMB operation under harsh ultralow‐temperature conditions.
- 2 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (43) , e3543240
Geometry‐Guided Screening of Metal/Oxide Heterointerfaces Enables Superior Sodium Metal Batteries at −40 °C
Despite their high theoretical energy density, sodium metal batteries (SMBs) remain limited by unstable interfacial chemistry and sluggish Na + transport kinetics, particularly under ultralow‐temperature conditions. Herein, guided by a geometry‐driven design principle linking structural matching at metal/metal‐oxide heterointerfaces with current density distribution, we identify a Y/Y 2 O 3 heterostructure as an optimal surface modification layer and fabricate it on commercial aluminum foil via magnetron sputtering. The resulting Y/Y 2 O 3 heterojunction, featuring a built‐in electric field and moderate sodiophilicity, homogenizes Na + flux, and directs reversible deposition. Meanwhile, the heterointerface facilitates PF 6 − adsorption, directing interfacial reactions toward the generation of inorganic solid electrolyte interphase components, which contributes to improved interfacial stability under ultralow‐temperature conditions. Consequently, the Y/Y 2 O 3 ‐modified current collector promotes highly reversible Na plating/stripping, enabling Na@Y/Y 2 O 3 @Al||Na 3 V 2 (PO 4 ) 3 full cells to retain robust cycling stability at −40 °C. The Y/Y 2 O 3 heterointerface design provides an effective platform for enabling durable SMB operation under harsh ultralow‐temperature conditions.
- 2 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (43)
Geometry‐Guided Screening of Metal/Oxide Heterointerfaces Enables Superior Sodium Metal Batteries at −40 °C
Despite their high theoretical energy density, sodium metal batteries (SMBs) remain limited by unstable interfacial chemistry and sluggish Na + transport kinetics, particularly under ultralow‐temperature conditions. Herein, guided by a geometry‐driven design principle linking structural matching at metal/metal‐oxide heterointerfaces with current density distribution, we identify a Y/Y 2 O 3 heterostructure as an optimal surface modification layer and fabricate it on commercial aluminum foil via magnetron sputtering. The resulting Y/Y 2 O 3 heterojunction, featuring a built‐in electric field and moderate sodiophilicity, homogenizes Na + flux, and directs reversible deposition. Meanwhile, the heterointerface facilitates PF 6 − adsorption, directing interfacial reactions toward the generation of inorganic solid electrolyte interphase components, which contributes to improved interfacial stability under ultralow‐temperature conditions. Consequently, the Y/Y 2 O 3 ‐modified current collector promotes highly reversible Na plating/stripping, enabling Na@Y/Y 2 O 3 @Al||Na 3 V 2 (PO 4 ) 3 full cells to retain robust cycling stability at −40 °C. The Y/Y 2 O 3 heterointerface design provides an effective platform for enabling durable SMB operation under harsh ultralow‐temperature conditions.
- 2 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (43)
Geometry‐Guided Screening of Metal/Oxide Heterointerfaces Enables Superior Sodium Metal Batteries at −40 °C
Despite their high theoretical energy density, sodium metal batteries (SMBs) remain limited by unstable interfacial chemistry and sluggish Na + transport kinetics, particularly under ultralow‐temperature conditions. Herein, guided by a geometry‐driven design principle linking structural matching at metal/metal‐oxide heterointerfaces with current density distribution, we identify a Y/Y 2 O 3 heterostructure as an optimal surface modification layer and fabricate it on commercial aluminum foil via magnetron sputtering. The resulting Y/Y 2 O 3 heterojunction, featuring a built‐in electric field and moderate sodiophilicity, homogenizes Na + flux, and directs reversible deposition. Meanwhile, the heterointerface facilitates PF 6 − adsorption, directing interfacial reactions toward the generation of inorganic solid electrolyte interphase components, which contributes to improved interfacial stability under ultralow‐temperature conditions. Consequently, the Y/Y 2 O 3 ‐modified current collector promotes highly reversible Na plating/stripping, enabling Na@Y/Y 2 O 3 @Al||Na 3 V 2 (PO 4 ) 3 full cells to retain robust cycling stability at −40 °C. The Y/Y 2 O 3 heterointerface design provides an effective platform for enabling durable SMB operation under harsh ultralow‐temperature conditions.
- Open Access
- 24 April 2026
- Published by Wiley in Small Structures
- Vol. 7 (4)
Architecting Resilience: Ionic Liquid‐Based Self‐Healing Polymer Electrolytes for Next‐Generation Solid‐State Batteries
Solid polymer electrolytes (SPEs) are pivotal for the realization of next‐generation flexible and inherently safe energy storage systems. However, their susceptibility to mechanical fatigue and microcrack propagation during prolonged cycling severely limits their lifespan and reliability. Although the integration of self‐healing capabilities into polymer matrices offers a promising solution, conventional self‐healing electrolytes suffer from an intrinsic trade‐off between mechanical robustness, healing efficiency, and ionic conductivity. Ionic liquid (IL)‐based self‐healing polymer electrolytes have emerged as an ideal candidate to fabricate the performance SPEs, owing to the unique synergistic role of ILs, including acting as nonvolatile plasticizers to accelerate polymer segmental motion for rapid healing and enhance ionic conductivity, also as active components that reinforce the proliferation of reversible supramolecular networks. This review presents a comprehensive survey of IL‐based self‐healing polymer electrolytes, beginning with an elucidation of the fundamental self‐healing mechanisms driven by dynamic supramolecular interactions. The discussion systematically traces the structural evolution of these materials, from systems utilizing solvate ILs and deep eutectic solvents to advanced polyIL architectures. By analyzing how specific molecular designs influence both autonomous repair efficiency and electrochemical performance, this work identifies strategies to reconcile the conductivity‐mechanical strength trade‐off and outlines future directions for constructing resilient, high‐performance SPEs.
- 24 April 2026
- Published by Wiley in Small Structures
- Vol. 7 (4)
Open AccessArchitecting Resilience: Ionic Liquid‐Based Self‐Healing Polymer Electrolytes for Next‐Generation Solid‐State Batteries
Solid polymer electrolytes (SPEs) are pivotal for the realization of next‐generation flexible and inherently safe energy storage systems. However, their susceptibility to mechanical fatigue and microcrack propagation during prolonged cycling severely limits their lifespan and reliability. Although the integration of self‐healing capabilities into polymer matrices offers a promising solution, conventional self‐healing electrolytes suffer from an intrinsic trade‐off between mechanical robustness, healing efficiency, and ionic conductivity. Ionic liquid (IL)‐based self‐healing polymer electrolytes have emerged as an ideal candidate to fabricate the performance SPEs, owing to the unique synergistic role of ILs, including acting as nonvolatile plasticizers to accelerate polymer segmental motion for rapid healing and enhance ionic conductivity, also as active components that reinforce the proliferation of reversible supramolecular networks. This review presents a comprehensive survey of IL‐based self‐healing polymer electrolytes, beginning with an elucidation of the fundamental self‐healing mechanisms driven by dynamic supramolecular interactions. The discussion systematically traces the structural evolution of these materials, from systems utilizing solvate ILs and deep eutectic solvents to advanced polyIL architectures. By analyzing how specific molecular designs influence both autonomous repair efficiency and electrochemical performance, this work identifies strategies to reconcile the conductivity‐mechanical strength trade‐off and outlines future directions for constructing resilient, high‐performance SPEs.
- 17 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (8) , 12782-12798
Engineering Oxygen Vacancy Distribution for Enhanced Structural Stability in Lithium-Rich Manganese-Based Oxide Cathode Materials
Lithium-rich manganese-based oxides (LRMOs) exhibit high specific capacity exceeding 250 mAh g-1, making them promising candidates for next-generation lithium-ion batteries. However, oxygen evolution during cycling destabilizes the crystal structure, leading to capacity fading. By precisely controlling the oxygen/nitrogen (O2/N2) ratio during sintering, this work achieves a significant reduction in bulk oxygen vacancy content and enhances lattice oxygen stability. The O50 sample sintered under 50%O2/50%N2 atmosphere ratio demonstrates exceptional performance with 96.7% capacity retention (216.5 mAh g-1) after 300 cycles at 1 C rate (1 C = 200 mA g-1). Remarkably, it maintains delivering 155.0 mAh g-1 at 5 C and 133.2 mAh g-1 at 10 C, showing superior rate capability. Structural characterization reveals this atmosphere-controlled sintering strategy simultaneously enhances bulk oxygen stability and surface oxygen vacancy generation, providing a simple yet effective strategy for the design of high-performance LRMOs.
- 17 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (8) , 12782-12798
Engineering Oxygen Vacancy Distribution for Enhanced Structural Stability in Lithium-Rich Manganese-Based Oxide Cathode Materials
Lithium-rich manganese-based oxides (LRMOs) exhibit high specific capacity exceeding 250 mAh g-1, making them promising candidates for next-generation lithium-ion batteries. However, oxygen evolution during cycling destabilizes the crystal structure, leading to capacity fading. By precisely controlling the oxygen/nitrogen (O2/N2) ratio during sintering, this work achieves a significant reduction in bulk oxygen vacancy content and enhances lattice oxygen stability. The O50 sample sintered under 50%O2/50%N2 atmosphere ratio demonstrates exceptional performance with 96.7% capacity retention (216.5 mAh g-1) after 300 cycles at 1 C rate (1 C = 200 mA g-1). Remarkably, it maintains delivering 155.0 mAh g-1 at 5 C and 133.2 mAh g-1 at 10 C, showing superior rate capability. Structural characterization reveals this atmosphere-controlled sintering strategy simultaneously enhances bulk oxygen stability and surface oxygen vacancy generation, providing a simple yet effective strategy for the design of high-performance LRMOs.