Mikhail Ugolnikov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mikhail Ugolnikov has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Aleksei N. Vshivkov
Institute of Continuous Media Mechanics of the Ural Branch of Russian Academy of Science (ICMM UB RAS), Russia
2 shared publications - Oleg Plekhov
Institute of Continuous Media Mechanics of the Ural Branch of Russian Academy of Science (ICMM UB RAS), Russia
2 shared publications - Alena Vedernikova1 shared publication
- Alexandr M. Pankov
Center of Experimental Mechanics, Perm National Research Polytechnic University, Russia
1 shared publication - Anastasia Lykova
Center of Experimental Mechanics, Perm National Research Polytechnic University, Russia
1 shared publication - Anastasiia Iziumova
Institute of continuous media mechanics of the Ural Branch of the Russian Academy of Sciences, Perm, Russia
1 shared publication
Latest Publications
- 23 May 2026
- Published by Springer Nature in Acta Mechanica
- Vol. 237 (10) , 7061-7074
Assessment of the critical distance magnitude after laser shock peening
- 23 May 2026
- Published by Springer Nature in Acta Mechanica
- Vol. 237 (10) , 7061-7074
Assessment of the critical distance magnitude after laser shock peening
- 1 January 2025
- Published by Institute of Marine Geology and Geophysics of the Far East Branch of the RAS in Geosystems of Transition Zones
- Vol. 9 (4)
Experimental study of heat and mass transfer in moist saline sand under axial freezing
The article involves the study of the freezing process of medium-grained sand saturated with aqueous NaCl solutions of various concentrations (0–104 g/l). The purpose of the study is to determine the influence of NaCl concentration on heat and mass transfer processes. Freezing was initiated from one end of the sample; the temperature field was recorded by eight thermocouples, while the moisture distribution was determined by weighing followed by drying. The results confirmed a linear decrease in the freezing point of pore water with increasing NaCl concentration, down to –7 °C. It was found that in all tests, moisture redistribution occurred with its accumulation near the freezing front. In non-saline samples this effect was most pronounced, which can be attributed to the combined influence of thermodiffusion and phase pressure differences at the water–ice interface. With increasing salinity, this effect weakened, and the contrast in moisture content between frozen and unfrozen zones decreased. The obtained time-space distributions of temperature and moisture provide a basis for parameterizing mathematical models of heat and mass transfer in frozen media, as well as serve as a starting point for further studies of freezing processes in saline soils.
- 1 January 2025
- Published by Institute of Marine Geology and Geophysics of the Far East Branch of the RAS in Geosystems of Transition Zones
- Vol. 9 (4)
Experimental study of heat and mass transfer in moist saline sand under axial freezing
The article involves the study of the freezing process of medium-grained sand saturated with aqueous NaCl solutions of various concentrations (0–104 g/l). The purpose of the study is to determine the influence of NaCl concentration on heat and mass transfer processes. Freezing was initiated from one end of the sample; the temperature field was recorded by eight thermocouples, while the moisture distribution was determined by weighing followed by drying. The results confirmed a linear decrease in the freezing point of pore water with increasing NaCl concentration, down to –7 °C. It was found that in all tests, moisture redistribution occurred with its accumulation near the freezing front. In non-saline samples this effect was most pronounced, which can be attributed to the combined influence of thermodiffusion and phase pressure differences at the water–ice interface. With increasing salinity, this effect weakened, and the contrast in moisture content between frozen and unfrozen zones decreased. The obtained time-space distributions of temperature and moisture provide a basis for parameterizing mathematical models of heat and mass transfer in frozen media, as well as serve as a starting point for further studies of freezing processes in saline soils.
- Open Access
- 6 October 2024
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 19 (71) , 1-10
Effect of Internal Technological Defects and Loading Waveform on Structural Composite Fatigue Life
This paper explores the effect of internal technological defects on the fatigue life of carbon fiber reinforced plastic (CFRP) under simple loading waveforms. One conducted experiments on CFRP specimens with embedded artificial defects, including delamination’s (circular dry-spot) and wrinkling. Following quasi-static tests, one developed a fatigue testing program using triangular and sine waveforms. The findings indicate that these simple waveforms do not significantly affect the fatigue resistance of defect-free CFRP or CFRP with internal technological defects. The presence of the wrinkling defect significantly diminishes the fatigue resistance of CFRP. However, constructing fatigue life curves in relative terms reveals that the reduction in fatigue properties is directly related to a decrease in strength properties. In the case of delamination (dry-spot) defects, a reduction in fatigue life by approximately 2.5 times was observed across the tested range.
- 6 October 2024
- Published by Gruppo Italiano Frattura in Fracture and Structural Integrity
- Vol. 19 (71) , 1-10
Open AccessEffect of Internal Technological Defects and Loading Waveform on Structural Composite Fatigue Life
This paper explores the effect of internal technological defects on the fatigue life of carbon fiber reinforced plastic (CFRP) under simple loading waveforms. One conducted experiments on CFRP specimens with embedded artificial defects, including delamination’s (circular dry-spot) and wrinkling. Following quasi-static tests, one developed a fatigue testing program using triangular and sine waveforms. The findings indicate that these simple waveforms do not significantly affect the fatigue resistance of defect-free CFRP or CFRP with internal technological defects. The presence of the wrinkling defect significantly diminishes the fatigue resistance of CFRP. However, constructing fatigue life curves in relative terms reveals that the reduction in fatigue properties is directly related to a decrease in strength properties. In the case of delamination (dry-spot) defects, a reduction in fatigue life by approximately 2.5 times was observed across the tested range.