Yangfan Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Yangfan Wang has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Dexu Lv
School of Electrical Engineering, Xian Jiaotong University, Xian, China
3 shared publications - Jun Cai
School of Automation, Nanjing University of Information Science and Technology, Nanjing 210044, China
3 shared publications - Shuo Chen
China University of Mining and Technology
3 shared publications - Wen Ding
School of Electrical Engineering, Xian Jiaotong University, Xian, China
3 shared publications - Kai Wang
Hudong Heavy Machinery Limited Company, Shanghai, China
2 shared publications - Xiang Wu
Tongji University
1 shared publication
Latest Publications
- 1 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-11
Finite Control Set Model Predictive Torque Control of Switched Reluctance Motor Based on Three-Phase Four-Leg Inverter
This article proposes a finite control set model predictive torque control (FCS MPTC) scheme based on three-phase four-leg inverter to suppress torque ripple and reduce the sharp current drop at the initial stages of the commutation regions. First, the operating modes of three-phase four-leg topology are analyzed, and the sectors are divided according to the operation of switched reluctance motor (SRM) on this topology. Then, predictive models for the current and torque in the single-phase conduction regions are derived using Le-Huy model and candidate voltage vectors. The proposed FCS MPTC scheme addresses the difficulty in predicting phase voltage during commutation regions by using the characteristic of equal current of two phases during these stages, achieving full-cycle FCS MPTC. Furthermore, to reduce computational burden while ensuring torque ripple suppression, the switching states are optimized based on the potential operating states. Eventually, experiments are carried out on a three-phase 750 W 12/8 SRM to verify the effectiveness of the proposed scheme. The results demonstrate that the proposed FCS MPTC scheme improves the effect of torque ripple suppression compared to existing schemes.
- 1 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. PP (02780046) , 1-11
Finite Control Set Model Predictive Torque Control of Switched Reluctance Motor Based on Three-Phase Four-Leg Inverter
This article proposes a finite control set model predictive torque control (FCS MPTC) scheme based on three-phase four-leg inverter to suppress torque ripple and reduce the sharp current drop at the initial stages of the commutation regions. First, the operating modes of three-phase four-leg topology are analyzed, and the sectors are divided according to the operation of switched reluctance motor (SRM) on this topology. Then, predictive models for the current and torque in the single-phase conduction regions are derived using Le-Huy model and candidate voltage vectors. The proposed FCS MPTC scheme addresses the difficulty in predicting phase voltage during commutation regions by using the characteristic of equal current of two phases during these stages, achieving full-cycle FCS MPTC. Furthermore, to reduce computational burden while ensuring torque ripple suppression, the switching states are optimized based on the potential operating states. Eventually, experiments are carried out on a three-phase 750 W 12/8 SRM to verify the effectiveness of the proposed scheme. The results demonstrate that the proposed FCS MPTC scheme improves the effect of torque ripple suppression compared to existing schemes.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (9) , 8895-8904
Sensorless Control for Switched Reluctance Motor Based on Quadrature Feature Position Observer at Medium and High Speeds
The conventional linear prediction has discontinuous estimated speed and position, and the error of flux linkage reduces the estimation accuracy. To solve the above problems, this article proposes a quadrature feature position observer for switched reluctance motor (SRM) at medium and high speeds, which includes harmonic decouple network (HDN), multiple second-order generalized integrator (MSOGI) and quadrature signal generator. This method uses HDN and MSOGI to filter the nonfundamental frequency of the feature position signal. Then a quadrature signal generator to transform the feature position signals into a set of quadrature signals, and the rotor position and speed are estimated by using the phase locked loop. Compared with the linear prediction method, proposed method has higher estimation accuracy, and there are no discontinuous estimated speed and position. In addition, this method does not need to measure the 3-D magnetic characteristics, requires less data storage space, the implementation is simpler, and has a wider application range. Eventually, the effectiveness of this method is verified on the 750 W 12/8 SRM setup, experimental results show that proposed method can improve the steady state and transient performance of sensorless control system.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 72 (9) , 8895-8904
Sensorless Control for Switched Reluctance Motor Based on Quadrature Feature Position Observer at Medium and High Speeds
The conventional linear prediction has discontinuous estimated speed and position, and the error of flux linkage reduces the estimation accuracy. To solve the above problems, this article proposes a quadrature feature position observer for switched reluctance motor (SRM) at medium and high speeds, which includes harmonic decouple network (HDN), multiple second-order generalized integrator (MSOGI) and quadrature signal generator. This method uses HDN and MSOGI to filter the nonfundamental frequency of the feature position signal. Then a quadrature signal generator to transform the feature position signals into a set of quadrature signals, and the rotor position and speed are estimated by using the phase locked loop. Compared with the linear prediction method, proposed method has higher estimation accuracy, and there are no discontinuous estimated speed and position. In addition, this method does not need to measure the 3-D magnetic characteristics, requires less data storage space, the implementation is simpler, and has a wider application range. Eventually, the effectiveness of this method is verified on the 750 W 12/8 SRM setup, experimental results show that proposed method can improve the steady state and transient performance of sensorless control system.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (1) , 5005-5016
Low-Speed Sensorless Control of Switched Reluctance Motor Drives Using Random Pulse Injection for Noise Reduction
To reduce copper loss and noise caused by high-frequency pulse injection (HFPI), this paper proposes a random pulse injection method based on proportional-integral control duty cycle (PI-RPI) for sensorless control of switched reluctance motors (SRM) at low speed. Conventional injection methods use a fixed voltage duty cycle for position estimation, while the induced current in the idle phase varies with the rotor position, which will produce large copper loss. Additionally, fixed-frequency signal injection causes discrete harmonics in the current power spectral density (PSD), which result in extra noise. The above problems reduce the efficiency of the drive system and limit the use of traditional sensorless methods. This paper first introduces the traditional HFPI method. Based on that, the copper loss of the idle phase is reduced by closed-loop control of the induced current using a proportional-integral controller. Then, a novel random pulse injection method using H-bridge topology is proposed, which eliminates discrete harmonics in the current PSD by injecting pulses of random frequency and direction. The current PSD of the proposed PI-RPI method is compared with the conventional methods. The effectiveness of the proposed sensorless control scheme is verified on a 750W SRM setup.
- 7 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Transportation Electrification
- Vol. 11 (1) , 5005-5016
Low-Speed Sensorless Control of Switched Reluctance Motor Drives Using Random Pulse Injection for Noise Reduction
To reduce copper loss and noise caused by high-frequency pulse injection (HFPI), this paper proposes a random pulse injection method based on proportional-integral control duty cycle (PI-RPI) for sensorless control of switched reluctance motors (SRM) at low speed. Conventional injection methods use a fixed voltage duty cycle for position estimation, while the induced current in the idle phase varies with the rotor position, which will produce large copper loss. Additionally, fixed-frequency signal injection causes discrete harmonics in the current power spectral density (PSD), which result in extra noise. The above problems reduce the efficiency of the drive system and limit the use of traditional sensorless methods. This paper first introduces the traditional HFPI method. Based on that, the copper loss of the idle phase is reduced by closed-loop control of the induced current using a proportional-integral controller. Then, a novel random pulse injection method using H-bridge topology is proposed, which eliminates discrete harmonics in the current PSD by injecting pulses of random frequency and direction. The current PSD of the proposed PI-RPI method is compared with the conventional methods. The effectiveness of the proposed sensorless control scheme is verified on a 750W SRM setup.