James Kasic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
James Kasic has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Oliver Maas
Institute of Meteorology and Climatology, Leibniz University Hannover, Hanover, Germany
2 shared publications - Philipp Gasch
Karlsruhe Institute of Technology, Institute of Meteorology and Climate Research Troposphere Research, Kaiserstraße 12, 76131 Karlsruhe, Germany
2 shared publications Zhien Wang
Department of Atmospheric and Oceanic Sciences, University of Colorado, Boulder, CO, USA
2 shared publications- Jérôme Genest
Université Laval
1 shared publication - Kevin C. Cossel
National Institute of Standards and Technology, Spectrum Testing and Research Division, Boulder, CO 80305
1 shared publication - Mathieu Walsh
Université Laval
1 shared publication
Latest Publications
- 1 October 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (10)
Graphics card-based real-time processing for dual comb interferometry
The technique of performing interferometry with two optical frequency combs is used by an increasing number of research groups and even for field deployed commercial applications. Real-time interferogram acquisition, correction, and averaging are, however, still not broadly accessible. This limits the deployment and wider adoption of this high resolution, high sensitivity technique. We herein introduce and describe a freely available correction software performing real-time processing on a graphics processing unit.
- 1 October 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (10)
Graphics card-based real-time processing for dual comb interferometry
The technique of performing interferometry with two optical frequency combs is used by an increasing number of research groups and even for field deployed commercial applications. Real-time interferogram acquisition, correction, and averaging are, however, still not broadly accessible. This limits the deployment and wider adoption of this high resolution, high sensitivity technique. We herein introduce and describe a freely available correction software performing real-time processing on a graphics processing unit.
- Open Access
- 16 November 2023
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 16 (22) , 5495-5523
Advancing airborne Doppler lidar wind profiling in turbulent boundary layer flow – an LES-based optimization of traditional scanning-beam versus novel fixed-beam measurement systems
There is a need for improved wind measurements inside the planetary boundary layer (PBL), including the capability to sample turbulent flow. Airborne Doppler lidar (ADL) provides unique capabilities for spatially resolved and targeted wind measurements in the PBL. However, ADL wind profiling in the PBL is challenging, as turbulence violates the flow homogeneity assumption used in wind profile retrieval and thereby introduces error in the retrieved wind profiles. As turbulence is a dominant source of error it is necessary to investigate and optimize ADL wind profiling capabilities in turbulent PBL flow. This study investigates the potential of a novel multiple-fixed-beam ADL system design to provide improved wind information in turbulent PBL flow compared to traditional single-scanning-beam ADL systems. To achieve this, an LES-based (LES: large eddy simulation) airborne Doppler lidar simulator presented in Gasch et al. (2020) is employed and extended in this study. Results show that a multiple-fixed-beam system with settings comparable to those of commonly used single-scanning-beam systems offers distinct advantages. Advantages include overall reduced wind profile retrieval error due to turbulence and improved spatial representation alongside higher wind profile availability. The study also offers insight into the dependence of the retrieval error on system setup parameters and retrieval parameters for both fixed-beam and scanning-beam systems. When using a fixed-beam system, an order of magnitude higher wind profile resolution appears possible compared to traditional scanning systems at comparable retrieval accuracy. Thus, using multiple-fixed-beam systems opens the door to better sampling of turbulent PBL flow. Overall, the simulator provides a cost-effective tool to investigate and optimize wind profile error characteristics due to turbulence and to optimize system setup and retrieval strategies for ADL wind profiling in turbulent flow.
- 16 November 2023
- Published by Copernicus GmbH in Atmospheric Measurement Techniques
- Vol. 16 (22) , 5495-5523
Open AccessAdvancing airborne Doppler lidar wind profiling in turbulent boundary layer flow – an LES-based optimization of traditional scanning-beam versus novel fixed-beam measurement systems
There is a need for improved wind measurements inside the planetary boundary layer (PBL), including the capability to sample turbulent flow. Airborne Doppler lidar (ADL) provides unique capabilities for spatially resolved and targeted wind measurements in the PBL. However, ADL wind profiling in the PBL is challenging, as turbulence violates the flow homogeneity assumption used in wind profile retrieval and thereby introduces error in the retrieved wind profiles. As turbulence is a dominant source of error it is necessary to investigate and optimize ADL wind profiling capabilities in turbulent PBL flow. This study investigates the potential of a novel multiple-fixed-beam ADL system design to provide improved wind information in turbulent PBL flow compared to traditional single-scanning-beam ADL systems. To achieve this, an LES-based (LES: large eddy simulation) airborne Doppler lidar simulator presented in Gasch et al. (2020) is employed and extended in this study. Results show that a multiple-fixed-beam system with settings comparable to those of commonly used single-scanning-beam systems offers distinct advantages. Advantages include overall reduced wind profile retrieval error due to turbulence and improved spatial representation alongside higher wind profile availability. The study also offers insight into the dependence of the retrieval error on system setup parameters and retrieval parameters for both fixed-beam and scanning-beam systems. When using a fixed-beam system, an order of magnitude higher wind profile resolution appears possible compared to traditional scanning systems at comparable retrieval accuracy. Thus, using multiple-fixed-beam systems opens the door to better sampling of turbulent PBL flow. Overall, the simulator provides a cost-effective tool to investigate and optimize wind profile error characteristics due to turbulence and to optimize system setup and retrieval strategies for ADL wind profiling in turbulent flow.
- Open Access
- 28 March 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-39
Advancing airborne Doppler lidar wind profiling in turbulent boundary layer flow – an LES-based optimization of traditional scanning-beam versus novel fixed-beam measurement systems
There is a need for improved wind measurements inside the planetary boundary layer (PBL), including the capability to sample turbulent flow. Airborne Doppler lidar (ADL) provides unique capabilities for spatially resolved and targeted wind measurements in the PBL. However, ADL wind profiling in the PBL is challenging, as turbulence violates the flow homogeneity assumption used in wind profile retrieval and thereby introduces error in the retrieved wind profiles. As turbulence is a dominant source of error it is necessary to investigate and optimize ADL wind profiling capabilities in turbulent PBL flow. This study investigates the potential of a novel multiple fixed-beam ADL system design to provide improved wind information in turbulent PBL flow, compared to traditional single scanning-beam ADL systems. To achieve this, an LES-based airborne Doppler lidar simulator presented in Gasch et al. (2020) is employed and extended in this study. Results show that a multiple fixed-beam system with settings comparable to those of commonly used single scanning-beam systems offers distinct advantages. Advantages include overall reduced wind profile retrieval error due to turbulence and improved spatial representation alongside higher wind profile availability. The study also offers insight into the dependence of the retrieval error on system setup parameters and retrieval parameters for both fixed-beam and scanning-beam systems. When using a fixed-beam system, an order of magnitude higher wind profile resolution appears possible, compared to traditional scanning systems at comparable retrieval accuracy. Thus, using multiple fixed-beam systems opens the door towards better sampling of turbulent PBL flow. Overall, the simulator provides a cost-effective tool to investigate and optimize wind profile error characteristics due to turbulence, and to optimize system setup and retrieval strategies for ADL wind profiling in turbulent flow.
- 28 March 2023
- Published by Copernicus GmbH in EGUsphere
- Vol. 2023, 1-39
Open AccessAdvancing airborne Doppler lidar wind profiling in turbulent boundary layer flow – an LES-based optimization of traditional scanning-beam versus novel fixed-beam measurement systems
There is a need for improved wind measurements inside the planetary boundary layer (PBL), including the capability to sample turbulent flow. Airborne Doppler lidar (ADL) provides unique capabilities for spatially resolved and targeted wind measurements in the PBL. However, ADL wind profiling in the PBL is challenging, as turbulence violates the flow homogeneity assumption used in wind profile retrieval and thereby introduces error in the retrieved wind profiles. As turbulence is a dominant source of error it is necessary to investigate and optimize ADL wind profiling capabilities in turbulent PBL flow. This study investigates the potential of a novel multiple fixed-beam ADL system design to provide improved wind information in turbulent PBL flow, compared to traditional single scanning-beam ADL systems. To achieve this, an LES-based airborne Doppler lidar simulator presented in Gasch et al. (2020) is employed and extended in this study. Results show that a multiple fixed-beam system with settings comparable to those of commonly used single scanning-beam systems offers distinct advantages. Advantages include overall reduced wind profile retrieval error due to turbulence and improved spatial representation alongside higher wind profile availability. The study also offers insight into the dependence of the retrieval error on system setup parameters and retrieval parameters for both fixed-beam and scanning-beam systems. When using a fixed-beam system, an order of magnitude higher wind profile resolution appears possible, compared to traditional scanning systems at comparable retrieval accuracy. Thus, using multiple fixed-beam systems opens the door towards better sampling of turbulent PBL flow. Overall, the simulator provides a cost-effective tool to investigate and optimize wind profile error characteristics due to turbulence, and to optimize system setup and retrieval strategies for ADL wind profiling in turbulent flow.