Gustavo Xavier Prestes
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gustavo Xavier Prestes has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Filipe Pinarello Scalcon
Department of Electrical and Software Engineering, University of Calgary, Calgary, AB, Canada
4 shared publications - Rodrigo Padilha Vieira
Universidade Federal de Santa Maria
4 shared publications - Cesar José Volpato Filho
Siemens Gamesa Renewable Energy A/S, Brande, Denmark
2 shared publications - Gaoliang Fang
Faculty of Sustainable Design Engineering, University of Prince Edward Island, Charlottetown, PE, Canada
2 shared publications - Hilton Abílio Gründling
Federal University of Santa Maria
2 shared publications - Adailton Braga Junior
Federal University of Santa Maria (UFSM),Research Group of Power Electronics and Control (GEPOC)
1 shared publication
Latest Publications
- 6 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (6) , 9133-9145
Optimized Discrete-Time LQI Current Control for Indirect Torque Regulation of Switched Reluctance Motors
Torque ripple remains a key challenge in switched reluctance motors (SRMs) due to their highly nonlinear magnetic characteristics. In order to achieve improved torque smoothness, this article proposes an enhanced discrete-time current controller based on Linear Quadratic Integral (LQI) regulation, combined with an offline Torque Sharing Function to enable indirect torque control. A performance-oriented optimization methodology is introduced, where the weighting matrices of the LQI formulation are tuned using a Genetic Algorithm to balance current tracking accuracy and control effort. The proposed controller consistently maintains low root-mean-square errors in both current and torque across a wide range of speeds and load conditions, while ensuring torque smoothness. Such performance is sustained throughout all operating points, despite the highly nonlinear and strongly speed/load/position-dependent behavior of the SRM. The strategy also presents high robustness to parametric uncertainty, maintaining closed-loop stability under inductance variations of up to $\pm$50% relative to the design model. Furthermore, its reduced computational burden makes it suitable for lower-cost processors or multidrive applications. Experimental results validate the effectiveness of the proposed strategy, demonstrating reduced torque ripple and current-tracking error under both steady-state and dynamic conditions.
- 6 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (6) , 9133-9145
Optimized Discrete-Time LQI Current Control for Indirect Torque Regulation of Switched Reluctance Motors
Torque ripple remains a key challenge in switched reluctance motors (SRMs) due to their highly nonlinear magnetic characteristics. In order to achieve improved torque smoothness, this article proposes an enhanced discrete-time current controller based on Linear Quadratic Integral (LQI) regulation, combined with an offline Torque Sharing Function to enable indirect torque control. A performance-oriented optimization methodology is introduced, where the weighting matrices of the LQI formulation are tuned using a Genetic Algorithm to balance current tracking accuracy and control effort. The proposed controller consistently maintains low root-mean-square errors in both current and torque across a wide range of speeds and load conditions, while ensuring torque smoothness. Such performance is sustained throughout all operating points, despite the highly nonlinear and strongly speed/load/position-dependent behavior of the SRM. The strategy also presents high robustness to parametric uncertainty, maintaining closed-loop stability under inductance variations of up to $\pm$50% relative to the design model. Furthermore, its reduced computational burden makes it suitable for lower-cost processors or multidrive applications. Experimental results validate the effectiveness of the proposed strategy, demonstrating reduced torque ripple and current-tracking error under both steady-state and dynamic conditions.
- Open Access
- 27 August 2025
- Published by Associacao Brasileira de Eletronica de Potencia SOBRAEP in Eletrônica de Potência
- Vol. 30, e202550
A Fast Firing Angle Optimization Approach for Current-Controlled Switched Reluctance Generators in Wind Power Applications
The adequate choice of excitation parameters is detrimental to the high performance operation of switched reluctance generators. Such task, however, is a complex problem which lacks solutions with simple analytical formulations. In this context, this paper presents a performance optimization procedure for switched reluctance generators operating in the current controlled region, below base speed. The proposal allows optimal firing angles to be determined based on the particle swarm optimization algorithm. A cost function is designed as a means to ensure performance with a compromise between reduced torque ripple and increased energy efficiency. A comparison with a traditional exhaustive search algorithm is provided, highlighting the reduced computational complexity of the proposal. Moreover, an original statistical analysis is presented as a means to demonstrate the low dispersion of the PSO-based procedure. Experimental results are provided in order to demonstrate the performance of the wind energy conversion system operating with optimal parameters.
- 27 August 2025
- Published by Associacao Brasileira de Eletronica de Potencia SOBRAEP in Eletrônica de Potência
- Vol. 30, e202550
Open AccessA Fast Firing Angle Optimization Approach for Current-Controlled Switched Reluctance Generators in Wind Power Applications
The adequate choice of excitation parameters is detrimental to the high performance operation of switched reluctance generators. Such task, however, is a complex problem which lacks solutions with simple analytical formulations. In this context, this paper presents a performance optimization procedure for switched reluctance generators operating in the current controlled region, below base speed. The proposal allows optimal firing angles to be determined based on the particle swarm optimization algorithm. A cost function is designed as a means to ensure performance with a compromise between reduced torque ripple and increased energy efficiency. A comparison with a traditional exhaustive search algorithm is provided, highlighting the reduced computational complexity of the proposal. Moreover, an original statistical analysis is presented as a means to demonstrate the low dispersion of the PSO-based procedure. Experimental results are provided in order to demonstrate the performance of the wind energy conversion system operating with optimal parameters.
- Open Access
- 16 October 2024
- Published by Associacao Brasileira de Eletronica de Potencia SOBRAEP in Eletrônica de Potência
- Vol. 29, e202442
Enhancing SRM Performance through Multi-Platform Optimization and FPGA-Based Real-Time Simulation
This paper proposes a multi-platform algorithm methodology in order to define firing angles of torque sharing functions (TSFs) for the indirect torque control of switched reluctance motors (SRM) through a hardware-in-the-loop (HIL) system. This proposal is used to achieve optimal levels of torque ripple and losses with accuracy and reliability, while taking advantage of real-time simulation. The analysis is performed assuming steady-state conditions of speed and torque reference for levels below the base speed, aiming to obtain firing angles ensuring optimal tracking performance. A novel methodology is proposed by using a grid search algorithm that handles the communication between Python, Code Composer, and the Typhoon HIL device. For that, an experimental data FPGA-based model with 500~ns of simulation time step is used to ensure highly accurate dynamic responses of current and electromagnetic torque. Moreover, controller-HIL (C-HIL) is used to have a safe and high fidelity testing environment, allowing rapid testing before transitioning to an experimental test bench. The simulation results are experimentally validated, demonstrating that the proposed strategy is effective and ensures optimal performance, taking into account peripheral systems of A/D, signal conditioning, PWM, and sensor emulation.
- 16 October 2024
- Published by Associacao Brasileira de Eletronica de Potencia SOBRAEP in Eletrônica de Potência
- Vol. 29, e202442
Open AccessEnhancing SRM Performance through Multi-Platform Optimization and FPGA-Based Real-Time Simulation
This paper proposes a multi-platform algorithm methodology in order to define firing angles of torque sharing functions (TSFs) for the indirect torque control of switched reluctance motors (SRM) through a hardware-in-the-loop (HIL) system. This proposal is used to achieve optimal levels of torque ripple and losses with accuracy and reliability, while taking advantage of real-time simulation. The analysis is performed assuming steady-state conditions of speed and torque reference for levels below the base speed, aiming to obtain firing angles ensuring optimal tracking performance. A novel methodology is proposed by using a grid search algorithm that handles the communication between Python, Code Composer, and the Typhoon HIL device. For that, an experimental data FPGA-based model with 500~ns of simulation time step is used to ensure highly accurate dynamic responses of current and electromagnetic torque. Moreover, controller-HIL (C-HIL) is used to have a safe and high fidelity testing environment, allowing rapid testing before transitioning to an experimental test bench. The simulation results are experimentally validated, demonstrating that the proposed strategy is effective and ensures optimal performance, taking into account peripheral systems of A/D, signal conditioning, PWM, and sensor emulation.
- 26 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Discrete-Time Higher-Order Sliding Mode Current Controller for Switched Reluctance Motor Drives
This paper proposes a high-tracking capability current controller based on discrete-time super-twisting sliding mode with equivalent control action for a switched reluctance motor (SRM). The detailed description of the equivalent control action in discrete-time is presented with parametric variation approach. The default reference of current controller is based on toque sharing function. Root-mean-squares (RSMEs) of current and torque phase tracking criterion are used as optimization objectives to design optimal gains through particle swarm algorithm. Comparison analysis with benchmark current controllers for variable speed operation shows the superior performance in current tracking, torque ripple mitigation and lower chattering effect, as with two delay samples tracking error implementation.
- 26 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Discrete-Time Higher-Order Sliding Mode Current Controller for Switched Reluctance Motor Drives
This paper proposes a high-tracking capability current controller based on discrete-time super-twisting sliding mode with equivalent control action for a switched reluctance motor (SRM). The detailed description of the equivalent control action in discrete-time is presented with parametric variation approach. The default reference of current controller is based on toque sharing function. Root-mean-squares (RSMEs) of current and torque phase tracking criterion are used as optimization objectives to design optimal gains through particle swarm algorithm. Comparison analysis with benchmark current controllers for variable speed operation shows the superior performance in current tracking, torque ripple mitigation and lower chattering effect, as with two delay samples tracking error implementation.