Rafał Cygan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rafał Cygan has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Łukasz Rakoczy
AGH University of Krakow
2 shared publications - Agata Tłuczek
Institute of Power Engineering - National Research Institute, Warsaw, Mory, Ceramic Division CEREL, Boguchwała, Poland
1 shared publication - Ewa Rząd
Centre for Corrosion Studies, Łukasiewicz Research Network—Krakow Institute of Technology, 73 Zakopiańska St., 30-418 Krakow, Poland
1 shared publication - Grzegorz Cempura
Faculty of Metals Engineering and Industrial Computer Science, AGH University of Krakow, Kraków, Poland
1 shared publication M. Grudzień
Foundry Research Institute, ul. Zakopianska 73, 30-418 Kraków, Poland
1 shared publication- Magdalena Gromada
Institute of Power Engineering - National Research Institute, Warsaw, Mory, Ceramic Division CEREL, Boguchwała, Poland
1 shared publication
Latest Publications
- Open Access
- 1 January 2024
- Published by National Library of Serbia in Processing and Application of Ceramics
- Vol. 18 (3) , 299-306
Silica-based ceramic cores for high-pressure turbine airfoil blades in aircraft engines
Ceramic cores for high-pressure turbine airfoil blades in aircraft engines are characterised by very complicated shapes and the presence of small diameter holes and thin long grooves. In this paper, eight starting powder mixtures having different contents of fused silica, zirconium silicate, alumina and borosilicate glass were used for preparation of core material. The composition, which satisfies every demand for core application in the investment casting of high-pressure turbine blades, contains 69.0wt.% fused silica, 13.0 wt.% zirconium silicate, 12.0wt.% alumina and 6.0wt.% borosilicate glass. This material was characterised by a mechanical strength of 33.1MPa, a coefficient of thermal expansion of 2.56 ? 10?6 1/K, surface roughness of 1.8 ?m, shrinkage of less than 0.8% and an average pore size diameter of 2.7 ?m. The thin-walled ceramic cores were formed by the high-pressure injection moulding method, which required the selection of a thermoplasticiser, feedstock formulation and determination of the optimal processing conditions protecting the injected cores from defects and deformation. The post-shaping process of the cores included both water and thermal debinding, sintering, precision machining and dimension measurements.
- 1 January 2024
- Published by National Library of Serbia in Processing and Application of Ceramics
- Vol. 18 (3) , 299-306
Open AccessSilica-based ceramic cores for high-pressure turbine airfoil blades in aircraft engines
Ceramic cores for high-pressure turbine airfoil blades in aircraft engines are characterised by very complicated shapes and the presence of small diameter holes and thin long grooves. In this paper, eight starting powder mixtures having different contents of fused silica, zirconium silicate, alumina and borosilicate glass were used for preparation of core material. The composition, which satisfies every demand for core application in the investment casting of high-pressure turbine blades, contains 69.0wt.% fused silica, 13.0 wt.% zirconium silicate, 12.0wt.% alumina and 6.0wt.% borosilicate glass. This material was characterised by a mechanical strength of 33.1MPa, a coefficient of thermal expansion of 2.56 ? 10?6 1/K, surface roughness of 1.8 ?m, shrinkage of less than 0.8% and an average pore size diameter of 2.7 ?m. The thin-walled ceramic cores were formed by the high-pressure injection moulding method, which required the selection of a thermoplasticiser, feedstock formulation and determination of the optimal processing conditions protecting the injected cores from defects and deformation. The post-shaping process of the cores included both water and thermal debinding, sintering, precision machining and dimension measurements.