DWDisheng Wei

Disheng Wei

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Disheng Wei has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • 48 W, 5 ps, 100 kHz Ho:YLF CPA system and its application to mid-infrared ZGP OPG/OPA

    by Fei Wang, Disheng Wei, Lulu Gao, Jichao Liu, Gaoyou Liu, Zhaojun Liu

    In this Letter, we report a high-power, high-repetition-rate Ho:YLF chirped-pulse amplification (CPA) system driving a ZnGeP 2 (ZGP) optical parametric generator and amplifier (OPG/OPA). The Ho:YLF CPA system operates at 100 kHz, delivering 48.1 W of average power at 2050.8 nm with a compressed pulse width of 5.0 ps. Using this source to pump the ZGP OPG/OPA, we obtain a 2.7 W signal light at 3402.1 nm and 0.64 W idler light at 5160.3 nm, with a pulse width of 2.5 ps for both. Moreover, continuous wavelength tuning ranges are achieved over 3051.2–3900.2 nm for the signal light and 4205.1–5160.3 nm for the idler light.

  • Efficient and controllable intracavity generation of high-energy 2 μm vortex beams and petal-like modes under annular pumping

    by Tao Li, Lulu Gao, Jichao Liu, Jun Meng, Gaoyou Liu, Disheng Wei, Zhaojun Liu

    We demonstrated a simple and effective method for continuous tuning of Laguerre–Gaussian (LG) modes in a high-energy 2.05 μm Ho:YLF laser. By translating the gain crystal along the optical axis, the spatial overlap between the pump beam and intracavity modes was controlled, enabling efficient generation of pulsed vortex beams and petal-like modes under a fixed cavity geometry. Under Q-switched operation at a repetition rate of 1 kHz, stable pulsed output of LG 0,1 was achieved with a maximum average power of 5.1 W, corresponding to a pulse energy of 5.1 mJ and a pulse duration of 83.0 ns. Experimental results showed that higher-order LG modes could be continuously tuned by adjusting the crystal position. For higher-order modes, the observed petal-like patterns corresponded to the coherent superposition of ± l degenerate states, with pulse energies at the millijoule level.

  • Development of a High-Energy Picosecond Mid-Infrared Laser Based on ZnGeP2 Optical Parametric Generator/Amplifier

    by Disheng Wei, Minglang Wu, Wenhao Cheng, Jinwen Tang, Junhui Li, Xiaoxiao Hua, Baoquan Yao, Tongyu Dai, Xiaoming Duan

    We developed a high-energy picosecond mid-infrared laser based on ZnGeP2 (ZGP) optical parametric generator (OPG)/optical parametric amplifier (OPA), operating at a pulse repetition frequency (PRF) of 1 kHz. The laser system was equipped with a 2.09 μm high-energy picosecond laser amplification system as the pump source. The pump source itself incorporated a gain-switched laser diode (GSLD) as the seed. By employing a holmium:yttrium-aluminum-garnet (Ho:YAG) regenerative amplifier (RA) and multi-stage power amplifiers, we successfully achieved a maximum pulse energy of 26.2 mJ at a wavelength of 2.09 μm. Initially, using a ZGP OPG and a one-stage OPA, we achieved mid-infrared laser output of over 6.4 mJ. However, the corresponding beam quality deteriorated, with beam quality factors (M2) exceeding 50 in both the x and y directions. To mitigate this issue, we transitioned to a ZGP OPG coupled with a two-stage OPA configuration, resulting in a mid-infrared laser output of over 6 mJ, accompanied by improved beam quality factors of 17.2 and 14.7 in the respective directions. Notably, the overall optical-to-optical conversion efficiency (OOCE) of the system surpassed 40%, with the second-stage OPA demonstrating an impressive OOCE exceeding 45%.


  • Open Access

    Thermal-birefringence-induced depolarization in a 450 W Ho:YAG MOPA system

    by Shuyi Mi, Jinwen Tang, Disheng Wei, Baoquan Yao, Junhui Li, Ke Yang, Tongyu Dai, Xiaoming Duan

    We demonstrated an efficient, high-power Ho:YAG master-oscillator power amplifier (MOPA) system and investigated its thermal-birefringence-induced depolarization. The maximum output power was 450 W with a depolarized power of 32.1 W and depolarization of 0.071 via three power amplifiers. To our knowledge, this is the highest average power generated from a Ho:YAG MOPA system. In theory, a simplified model was built to calculate the depolarization in the amplifier, and the theoretical results agreed with the actual value well. Moreover, the overall optical-to-optical efficiency of the MOPA system was near 60%, and the beam quality M2 factors of s-polarized laser were measured to be ∼ 1.8 at 400 W. In pulse operation, the per pulse energy was ∼ 11 mJ at the pulse repetition frequency of 40 kHz with the corresponding peak power of 220 kW.