Vladimir Aleksandrovich Tselischev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vladimir Aleksandrovich Tselischev has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Dmitry Vladimirovich Tselischev
Ufa University of Science and Technology, 32 Zaki Validi St., Ufa, 450076
5 shared publications - Dmitry A. Kuderko
Joint-Stock Company “Ural Works of Civil Aviation”, 1, building 1 Marshal Zhukov Avenue, Moscow, 123308
1 shared publication - G. K. Frolov
Ufa University of Science and Technology
1 shared publication - Nikolay A. Polyakov
Holding «Technodinamika
1 shared publication - Nikolay A. Polyakov
Joint-Stock Company “Ural Works of Civil Aviation”, 1, building 1, Marshal Zhukov Avenue Moscow, 123308
1 shared publication S. Y. Konstantinov
Ufa State Aviation Technical University, USATU, Ufa, Russia
1 shared publication
Latest Publications
- 30 June 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (2)
HYDRAULIC DRIVE OF A DRILLING RIG AS A CONTROL OBJECT
Problem Statement (Relevance). The studies are aimed at understanding which features of the theory of structural-parametric synthesis are applicable to the actuator drive of a drilling rig, which factors of multi-criteria control signals and compensation of combined external disturbances influence the formation of integrated hydromechanical and electrohydraulic effects that provide correction and regulation of the static and dynamic characteristics of hydraulic motors for the rotation and feed drives of drilling tools. Objectives. The purpose of the study is to determine directions for improving the performance characteristics of a drilling rig with a hydraulic drilling tool drive through the implementation of hydromechanical regulators in order to increase accuracy, stability, and controllability. Methods Applied. The main disturbing, control, and regulating effects acting on the hydraulic drive of the drilling tool are considered. Originality. Current trends toward the digitalization of drilling processes, maintenance, planning, and operation recording determine the necessity of considering the hydraulic drive system of the drilling tool integrated with an on-board digital computer as the object of research. Result. New hydromechanical regulators for the adaptive drilling process control system are proposed: a pressure regulator, a power regulator, a dynamic pressure regulator, and an LS regulator. The result is achieved through the collection, processing, and utilization of data on the power consumption of the drilling rig drive during transient operating modes under random loading conditions and during idling. The obtained data are used in the corresponding control task of the regulator, which adjusts pump operation by changing its capacity. Practical Relevance. The studies have made it possible to form a structural basis for hydraulic drive regulators of drilling rigs aimed at correcting static and dynamic characteristics and to prepare the foundation for the synthesis of regulator structures.
- 30 June 2026
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 24 (2)
HYDRAULIC DRIVE OF A DRILLING RIG AS A CONTROL OBJECT
Problem Statement (Relevance). The studies are aimed at understanding which features of the theory of structural-parametric synthesis are applicable to the actuator drive of a drilling rig, which factors of multi-criteria control signals and compensation of combined external disturbances influence the formation of integrated hydromechanical and electrohydraulic effects that provide correction and regulation of the static and dynamic characteristics of hydraulic motors for the rotation and feed drives of drilling tools. Objectives. The purpose of the study is to determine directions for improving the performance characteristics of a drilling rig with a hydraulic drilling tool drive through the implementation of hydromechanical regulators in order to increase accuracy, stability, and controllability. Methods Applied. The main disturbing, control, and regulating effects acting on the hydraulic drive of the drilling tool are considered. Originality. Current trends toward the digitalization of drilling processes, maintenance, planning, and operation recording determine the necessity of considering the hydraulic drive system of the drilling tool integrated with an on-board digital computer as the object of research. Result. New hydromechanical regulators for the adaptive drilling process control system are proposed: a pressure regulator, a power regulator, a dynamic pressure regulator, and an LS regulator. The result is achieved through the collection, processing, and utilization of data on the power consumption of the drilling rig drive during transient operating modes under random loading conditions and during idling. The obtained data are used in the corresponding control task of the regulator, which adjusts pump operation by changing its capacity. Practical Relevance. The studies have made it possible to form a structural basis for hydraulic drive regulators of drilling rigs aimed at correcting static and dynamic characteristics and to prepare the foundation for the synthesis of regulator structures.
- 16 June 2026
- Published by Moscow State Technical University of Civil Aviation in Crede Experto: Transport, Society, Education, Language
- Vol. 13 (2) , 43-63
Autonomous electro-hydraulic flight control actuator
- 16 June 2026
- Published by Moscow State Technical University of Civil Aviation in Crede Experto: Transport, Society, Education, Language
- Vol. 13 (2) , 43-63
Autonomous electro-hydraulic flight control actuator
- Open Access
- 16 June 2026
- Published by Samara National Research University in VESTNIK of Samara University. Aerospace and Mechanical Engineering
- Vol. 25 (2) , 159-171
Structural and parametric synthesis of hydromechanical regulators of the aircraft emergency system with a power transmission unit
The emergency subsystem of a passenger aircraft containing a power transmission unit as an object of regulation is considered. For the structural synthesis of new types of automatic control systems for the emergency system of an aircraft, the hydromechanical regulators of hydraulic machines included in the power transmission unit are presented, and recommendations on the selection of parameters for corrective feedback are developed. The scientific hypothesis, scientific and practical significance of the conducted research are formulated. The structure of the automatic control system of the aircraft's emergency system is substantiated. The development of hydromechanical systems for automatic control of the aircraft's emergency system is shown. The directions of parametric synthesis of control systems are given.
- 16 June 2026
- Published by Samara National Research University in VESTNIK of Samara University. Aerospace and Mechanical Engineering
- Vol. 25 (2) , 159-171
Open AccessStructural and parametric synthesis of hydromechanical regulators of the aircraft emergency system with a power transmission unit
The emergency subsystem of a passenger aircraft containing a power transmission unit as an object of regulation is considered. For the structural synthesis of new types of automatic control systems for the emergency system of an aircraft, the hydromechanical regulators of hydraulic machines included in the power transmission unit are presented, and recommendations on the selection of parameters for corrective feedback are developed. The scientific hypothesis, scientific and practical significance of the conducted research are formulated. The structure of the automatic control system of the aircraft's emergency system is substantiated. The development of hydromechanical systems for automatic control of the aircraft's emergency system is shown. The directions of parametric synthesis of control systems are given.
- 1 January 2025
- Published by Moscow State Technical University of Civil Aviation in Crede Experto: Transport, Society, Education, Language
- No. 2
QUADCOPTER HYDRAULIC DRIVE AS AN OBJECT OF REGULATION
The features of the development of domestic unmanned aerial vehicles are given. The main problems of the technological evolution of cargo quadrocopters have been revealed. The concept of the development of unmanned cargo multi-purpose multi-propeller flying aircraft is presented, reflecting the system of using a hydraulic transmission using the example of a quadcopter. The issues of accuracy, stability, controllability of the automatic control system and regulation of the hydraulic transmission of a cargo quadcopter are considered. A possible description of the hydraulic drive of the quadrocopter rotors as an object of regulation is presented. The forces acting on the quadcopter in flight have been determined. The controlling, disturbing and corrective effects on the automatic control and regulation system of the hydraulic transmission of the quadcopter are identified and described. The analysis of the possibility of using aircraft piston engines to drive the transmission of a cargo quadcopter, volumetric axial plunger pumps and hydraulic motors has been performed. New circuit solutions for hydromechanical devices for correcting static and dynamic characteristics are shown. Schematic solutions of hydraulic transmission regulators are presented: pressure regulator, dynamic pressure regulator, speed regulator, power regulator, LS regulator. The advantages of using regulators are described. The proposed hydro–mechanical controller with LS-regulation makes it possible to improve flight stability and energy efficiency of a multi-rotor aircraft.
- 1 January 2025
- Published by Moscow State Technical University of Civil Aviation in Crede Experto: Transport, Society, Education, Language
- No. 2
QUADCOPTER HYDRAULIC DRIVE AS AN OBJECT OF REGULATION
The features of the development of domestic unmanned aerial vehicles are given. The main problems of the technological evolution of cargo quadrocopters have been revealed. The concept of the development of unmanned cargo multi-purpose multi-propeller flying aircraft is presented, reflecting the system of using a hydraulic transmission using the example of a quadcopter. The issues of accuracy, stability, controllability of the automatic control system and regulation of the hydraulic transmission of a cargo quadcopter are considered. A possible description of the hydraulic drive of the quadrocopter rotors as an object of regulation is presented. The forces acting on the quadcopter in flight have been determined. The controlling, disturbing and corrective effects on the automatic control and regulation system of the hydraulic transmission of the quadcopter are identified and described. The analysis of the possibility of using aircraft piston engines to drive the transmission of a cargo quadcopter, volumetric axial plunger pumps and hydraulic motors has been performed. New circuit solutions for hydromechanical devices for correcting static and dynamic characteristics are shown. Schematic solutions of hydraulic transmission regulators are presented: pressure regulator, dynamic pressure regulator, speed regulator, power regulator, LS regulator. The advantages of using regulators are described. The proposed hydro–mechanical controller with LS-regulation makes it possible to improve flight stability and energy efficiency of a multi-rotor aircraft.
- Open Access
- 23 October 2024
- Published by Samara National Research University in VESTNIK of Samara University. Aerospace and Mechanical Engineering
- Vol. 23 (3) , 132-143
Problems of testing and operation of hydraulic power transfer units
The purpose and principles of operation of a civil aircraft emergency system including a power transfer unit are considered. Problems and trends of the development of piston hydraulic machines in aircraft construction are analyzed. The parameters of power transfer units used on 12 types of passenger airplanes are analyzed. The scenarios of failure of power transmission units are considered. The main directions of solving the problems of operation, as well as the requirements to design and testing are outlined.
- 23 October 2024
- Published by Samara National Research University in VESTNIK of Samara University. Aerospace and Mechanical Engineering
- Vol. 23 (3) , 132-143
Open AccessProblems of testing and operation of hydraulic power transfer units
The purpose and principles of operation of a civil aircraft emergency system including a power transfer unit are considered. Problems and trends of the development of piston hydraulic machines in aircraft construction are analyzed. The parameters of power transfer units used on 12 types of passenger airplanes are analyzed. The scenarios of failure of power transmission units are considered. The main directions of solving the problems of operation, as well as the requirements to design and testing are outlined.
- 16 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-11
The «KT model» of cavitation mass transfer for simulation in ANSYS CFX
The aim of the research is improvement of numerical cavitation models for simulation of hydrodynamic cavitation. The methods of development of a new dynamic component for a numerical model of cavitation mass transfer is presented in the paper. Application of the new method resulted in a new dynamic component for numerical model of cavitation mass transfer, which takes into account fluid viscosity in Rayleigh-Plesset equation. The new dynamic component has become the basis for the new numerical model of cavitation mass transfer [14]. The new model was called the Konstantinov-Tselischev model or the KT model. The KT model was verified by experimental researches of the effect of cavitation in ajet element “pipe-pipe”. The results of simulation showed that the KT model of cavitation mass transfer can simulate cavitation in thejet pipes with the difference between results of simulation and experiment not exceeding 2,5% and visualizing a cavitation zone more adequate.
- 16 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-11
The «KT model» of cavitation mass transfer for simulation in ANSYS CFX
The aim of the research is improvement of numerical cavitation models for simulation of hydrodynamic cavitation. The methods of development of a new dynamic component for a numerical model of cavitation mass transfer is presented in the paper. Application of the new method resulted in a new dynamic component for numerical model of cavitation mass transfer, which takes into account fluid viscosity in Rayleigh-Plesset equation. The new dynamic component has become the basis for the new numerical model of cavitation mass transfer [14]. The new model was called the Konstantinov-Tselischev model or the KT model. The KT model was verified by experimental researches of the effect of cavitation in ajet element “pipe-pipe”. The results of simulation showed that the KT model of cavitation mass transfer can simulate cavitation in thejet pipes with the difference between results of simulation and experiment not exceeding 2,5% and visualizing a cavitation zone more adequate.
- Open Access
- 10 December 2014
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 9 (4) , p21
Numerical Cavitation Model for Simulation of Mass Flow Stabilization Effect in ANSYS CFX
The aim of the article is improvement of numerical cavitation models for simulation of an effect of cavitation stabilization of fluid mass flow. The methods of development of a new dynamic component for a numerical model of cavitation mass transfer is presented in the paper. Application of the new method resulted in a new dynamic component for numerical model of cavitation mass transfer, which takes into account fluid viscosity in Reley-Plesset equation. Relying on the methods being considered fundamentally new hydroautomatic devices such as cavitation mass flow stabilizers and flow dividers could be designed. The new dynamic component has become the basis for the new numerical model of cavitation mass transfer. The effect of cavitation stabilization of fluid mass flow was simulated by this dynamic component. The numerical model was verified by experimental researches of the effect of cavitation stabilization of fluid mass flow in a jet element “pipe-pipe”. The results of simulation showed that the new numerical model of cavitation mass transfer can simulate the jet pipes with the difference between results of simulation and experiment not exceeding 2,5% and visualizing a ca vitation zone more adequate.
- 10 December 2014
- Published by Canadian Center of Science and Education in Modern Applied Science
- Vol. 9 (4) , p21
Open AccessNumerical Cavitation Model for Simulation of Mass Flow Stabilization Effect in ANSYS CFX
The aim of the article is improvement of numerical cavitation models for simulation of an effect of cavitation stabilization of fluid mass flow. The methods of development of a new dynamic component for a numerical model of cavitation mass transfer is presented in the paper. Application of the new method resulted in a new dynamic component for numerical model of cavitation mass transfer, which takes into account fluid viscosity in Reley-Plesset equation. Relying on the methods being considered fundamentally new hydroautomatic devices such as cavitation mass flow stabilizers and flow dividers could be designed. The new dynamic component has become the basis for the new numerical model of cavitation mass transfer. The effect of cavitation stabilization of fluid mass flow was simulated by this dynamic component. The numerical model was verified by experimental researches of the effect of cavitation stabilization of fluid mass flow in a jet element “pipe-pipe”. The results of simulation showed that the new numerical model of cavitation mass transfer can simulate the jet pipes with the difference between results of simulation and experiment not exceeding 2,5% and visualizing a ca vitation zone more adequate.