Hossein Afshari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hossein Afshari has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Mahmoud Afshari
Mechanical Engineering Department, Birjand University of Technology, Birjand, Iran
3 shared publications - Abolfazl Foorginejad
Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran
2 shared publications - Javad Afshari
Islamic Azad University of Birjand
2 shared publications - Aseel Smerat
Faculty of Educational Sciences, Al-Ahliyya Amman University, Amman 19328, Jordan
1 shared publication - Hojjat Torshizi
Department of Mechanical Engineering, Birjand University of Technology, Birjand 9719866981, Iran
1 shared publication - Ishraga Galal-Eldin Abdalla Awad
Department of Chemistry, College of Science, University of Hafr Al Batin, Hafr Albatin, Saudi Arabia
1 shared publication
Latest Publications
- 11 November 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- p. 1-30
A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems
Jet engine spark plugs, which consist of a metal body, insulator, electrode, and adhesive, initiate combustion through an intermittent spark. This research focuses on the production of the plug’s metal shell for the aircraft engine, which was specifically fabricated from the nickel-based superalloy Inconel 600. The manufacturing process was preceded by a numerical simulation in Abaqus to analyze the heat and stress distribution within the spark plug. The spark plug body was then fabricated through sequential CNC turning and electrical discharge machining (EDM) processes. The manufactured sample was evaluated for dimensional accuracy and quality through surface roughness measurement, SEM microstructure analysis, and hardness testing. The minimum achievable surface roughness was attained using distinct optimal parameters for each process. CNC machining required a feed rate of 0.06 mm/rev and a cutting speed of 60 m/min, whereas EDM required a pulse-on time of 5 [Formula: see text]s, a pulse-off time of 4 [Formula: see text]s, an electric current of 8 A, and purified dielectric fluid. The optimization of EDM parameters, notably a shorter pulse-on time and dielectric purification, successfully mitigated microstructural defects like globules, microcracks, and coarse carbides, thereby producing an excellent surface finish. The spark plug fabricated via CNC and EDM machining exhibits density and hardness values equivalent to those of the original Phantom F-5 spark plug.
- 11 November 2026
- Published by World Scientific Pub Co Pte Ltd in Journal of Advanced Manufacturing Systems
- p. 1-30
A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems
Jet engine spark plugs, which consist of a metal body, insulator, electrode, and adhesive, initiate combustion through an intermittent spark. This research focuses on the production of the plug’s metal shell for the aircraft engine, which was specifically fabricated from the nickel-based superalloy Inconel 600. The manufacturing process was preceded by a numerical simulation in Abaqus to analyze the heat and stress distribution within the spark plug. The spark plug body was then fabricated through sequential CNC turning and electrical discharge machining (EDM) processes. The manufactured sample was evaluated for dimensional accuracy and quality through surface roughness measurement, SEM microstructure analysis, and hardness testing. The minimum achievable surface roughness was attained using distinct optimal parameters for each process. CNC machining required a feed rate of 0.06 mm/rev and a cutting speed of 60 m/min, whereas EDM required a pulse-on time of 5 [Formula: see text]s, a pulse-off time of 4 [Formula: see text]s, an electric current of 8 A, and purified dielectric fluid. The optimization of EDM parameters, notably a shorter pulse-on time and dielectric purification, successfully mitigated microstructural defects like globules, microcracks, and coarse carbides, thereby producing an excellent surface finish. The spark plug fabricated via CNC and EDM machining exhibits density and hardness values equivalent to those of the original Phantom F-5 spark plug.
- Open Access
- 27 October 2026
- Published by Springer Nature in Research Square
A Priori Domain Shift Index for Assessing Transferability in Federated Fault Diagnosis of Rotating Machinery
Federated learning (FL) has emerged as a promising approach for fault diagnosis in rotating machinery, particularly where raw data cannot be shared across machines or factories. However, differences in machine structure, operating conditions, and sensing systems introduce inter-machine domain shifts that degrade a global model on previously unseen machines. Existing studies mainly mitigate these shifts after model training, and few quantify their severity beforehand. This study investigates whether such severity can be measured before training. A Domain Shift Index (DSI) is defined as the data-volume-weighted sliced Wasserstein distance between model-independent vibration-feature distributions; it is computed from quantile summaries of shared random projections, so no raw samples are exchanged, and it is linked to a Lipschitz-type error bound whose constants are calibrated by quantile regression. The index is evaluated against six baseline discrepancy measures on 40 controlled synthetic machines (960 source–target cases) and on 16 domains of the public CWRU bearing benchmark (432 cases), using machine-level cluster bootstrap, Holm-corrected paired tests, and leave-one-machine-out calibration. The DSI is numerically stable (median coefficient of variation of about 2–3% with 200 projections) and moderately rank-correlated with zero-shot transfer error (Spearman ρ between 0.35 and 0.49 on synthetic data and between 0.30 and 0.49 on CWRU), but it is not superior to simple baselines such as MMD, and the calibrated bound, although it attains its nominal coverage, is loose and improves only marginally on a no-shift predictor. The index is therefore best regarded as a privacy-friendly screening dissimilarity rather than a quantitative predictor of accuracy loss; validation on industrial field data remains future work.
- 27 October 2026
- Published by Springer Nature in Research Square
Open AccessA Priori Domain Shift Index for Assessing Transferability in Federated Fault Diagnosis of Rotating Machinery
Federated learning (FL) has emerged as a promising approach for fault diagnosis in rotating machinery, particularly where raw data cannot be shared across machines or factories. However, differences in machine structure, operating conditions, and sensing systems introduce inter-machine domain shifts that degrade a global model on previously unseen machines. Existing studies mainly mitigate these shifts after model training, and few quantify their severity beforehand. This study investigates whether such severity can be measured before training. A Domain Shift Index (DSI) is defined as the data-volume-weighted sliced Wasserstein distance between model-independent vibration-feature distributions; it is computed from quantile summaries of shared random projections, so no raw samples are exchanged, and it is linked to a Lipschitz-type error bound whose constants are calibrated by quantile regression. The index is evaluated against six baseline discrepancy measures on 40 controlled synthetic machines (960 source–target cases) and on 16 domains of the public CWRU bearing benchmark (432 cases), using machine-level cluster bootstrap, Holm-corrected paired tests, and leave-one-machine-out calibration. The DSI is numerically stable (median coefficient of variation of about 2–3% with 200 projections) and moderately rank-correlated with zero-shot transfer error (Spearman ρ between 0.35 and 0.49 on synthetic data and between 0.30 and 0.49 on CWRU), but it is not superior to simple baselines such as MMD, and the calibrated bound, although it attains its nominal coverage, is loose and improves only marginally on a no-shift predictor. The index is therefore best regarded as a privacy-friendly screening dissimilarity rather than a quantitative predictor of accuracy loss; validation on industrial field data remains future work.
- Open Access
- 27 October 2026
- Published by Springer Nature in Research Square
Pre-training Assessment of Model Transferability via Distribution Shift in Petroleum Engineering
Data-driven models are increasingly used in petroleum engineering for tasks such as reservoir characterization, well-log interpretation, and production prediction. However, predictive performance may change when a model is applied to data from a different well, field, or operating condition. Differences between source and target datasets can therefore limit model transferability, yet this issue is commonly assessed only after model training. This study proposes a pre-training framework for quantifying source–target distribution shift and examining its relationship with subsequent zero-shot model transfer performance. The proposed approach uses predefined engineering features and Wasserstein-based distributional distances to construct a model-independent shift index that can be calculated before predictive model development. A prediction model is then trained exclusively on the source data and evaluated on the target data without retraining or adaptation. Pearson and Spearman correlation analyses are used to examine the relationship between the pre-training shift index and relative performance degradation. A controlled synthetic experiment is first used to verify the computational pipeline and methodological design. Across 24 synthetic well-transfer cases, the proposed indices captured different levels of source–target distribution shift, while the zero-shot model performance varied across target wells. None of the tested correlations reached the conventional 0.05 significance level, indicating that the present experiment provides preliminary rather than conclusive evidence of a systematic relationship between distribution shift and transfer degradation. Application to the real FORCE 2020 dataset is proposed as the next stage of validation. The framework provides a model-independent diagnostic that can be used to identify potentially challenging transfer settings before investing in model development or deployment.
- 27 October 2026
- Published by Springer Nature in Research Square
Open AccessPre-training Assessment of Model Transferability via Distribution Shift in Petroleum Engineering
Data-driven models are increasingly used in petroleum engineering for tasks such as reservoir characterization, well-log interpretation, and production prediction. However, predictive performance may change when a model is applied to data from a different well, field, or operating condition. Differences between source and target datasets can therefore limit model transferability, yet this issue is commonly assessed only after model training. This study proposes a pre-training framework for quantifying source–target distribution shift and examining its relationship with subsequent zero-shot model transfer performance. The proposed approach uses predefined engineering features and Wasserstein-based distributional distances to construct a model-independent shift index that can be calculated before predictive model development. A prediction model is then trained exclusively on the source data and evaluated on the target data without retraining or adaptation. Pearson and Spearman correlation analyses are used to examine the relationship between the pre-training shift index and relative performance degradation. A controlled synthetic experiment is first used to verify the computational pipeline and methodological design. Across 24 synthetic well-transfer cases, the proposed indices captured different levels of source–target distribution shift, while the zero-shot model performance varied across target wells. None of the tested correlations reached the conventional 0.05 significance level, indicating that the present experiment provides preliminary rather than conclusive evidence of a systematic relationship between distribution shift and transfer degradation. Application to the real FORCE 2020 dataset is proposed as the next stage of validation. The framework provides a model-independent diagnostic that can be used to identify potentially challenging transfer settings before investing in model development or deployment.
- Open Access
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (1) , 176-191
Multi-objective Optimization of Biomedical Scaffold Geometries for Mechanical and Porous Performance Enhancement
Scaffold geometry plays a crucial role in determining its mechanical strength, as changes in shape can significantly impact its properties. Additionally, porosity, which varies with geometry, weakens the scaffold's mechanical performance. This study investigates the influence of scaffold geometry on mechanical properties and porosity in biomedical applications. Seven distinct geometries were designed using identical materials and fabricated through 3D printing. The scaffolds underwent compressive strength testing and finite element simulations to evaluate their load-bearing capacity and porosity. Among the designs, hexagonal and circular geometries demonstrated superior mechanical performance and controlled porosity. A total of 81 hexagonal and 27 circular scaffold samples were analyzed using Abaqus software. Initially, Response Surface Methodology (RSM) was employed to model the relationship between pressure and porosity, identifying the optimal design space with high predictive accuracy (R² > 96%). Then, a multi-objective optimization process using the Multi-Objective Particle Swarm Optimization (MOPSO) algorithm was implemented. The results revealed a Pareto front for each geometry, enabling the selection of scaffolds with specific load-bearing capacities and maximum porosity levels. Validation tests showed a mean error of 3.4% for circular geometries and 3.53% for hexagonal geometries, demonstrating the reliability of the simulation and optimization methods. This comprehensive approach integrates experimental, simulation, and optimization techniques, offering a robust framework for designing high-performance scaffolds tailored to biomedical needs.
- 1 January 2026
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 39 (1) , 176-191
Open AccessMulti-objective Optimization of Biomedical Scaffold Geometries for Mechanical and Porous Performance Enhancement
Scaffold geometry plays a crucial role in determining its mechanical strength, as changes in shape can significantly impact its properties. Additionally, porosity, which varies with geometry, weakens the scaffold's mechanical performance. This study investigates the influence of scaffold geometry on mechanical properties and porosity in biomedical applications. Seven distinct geometries were designed using identical materials and fabricated through 3D printing. The scaffolds underwent compressive strength testing and finite element simulations to evaluate their load-bearing capacity and porosity. Among the designs, hexagonal and circular geometries demonstrated superior mechanical performance and controlled porosity. A total of 81 hexagonal and 27 circular scaffold samples were analyzed using Abaqus software. Initially, Response Surface Methodology (RSM) was employed to model the relationship between pressure and porosity, identifying the optimal design space with high predictive accuracy (R² > 96%). Then, a multi-objective optimization process using the Multi-Objective Particle Swarm Optimization (MOPSO) algorithm was implemented. The results revealed a Pareto front for each geometry, enabling the selection of scaffolds with specific load-bearing capacities and maximum porosity levels. Validation tests showed a mean error of 3.4% for circular geometries and 3.53% for hexagonal geometries, demonstrating the reliability of the simulation and optimization methods. This comprehensive approach integrates experimental, simulation, and optimization techniques, offering a robust framework for designing high-performance scaffolds tailored to biomedical needs.
- Open Access
- 29 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9909
Enhancement of Additive Manufacturing Processes for Thin-Walled Part Production Using Gas Metal Arc Welding (GMAW) with Wavelet Transform
Additive manufacturing encompasses technologies that produce three-dimensional computer-aided design (CAD) models through a layer-by-layer production process. Compared to traditional manufacturing methods, additive manufacturing technologies offer significant advantages in producing intricate components with minimal energy consumption, reduced raw material waste, and shortened production timelines. AM methods based on shielded gas welding have recently piqued the interest of researchers due to their high efficiency and cost-effectiveness in manufacturing critical components. However, one of the most formidable challenges in additive manufacturing methods based on shielded gas welding lies in the irregularity of weld bead height at different points, compromising the precision of components produced using these techniques. In this current research, we aimed to achieve uniform weld heights along the welding path by considering the most influential parameters on weld bead geometry and conducting experimental tests. Input parameters of the process, including nozzle angle, welding speed, wire speed, and voltage, were considered. Simultaneously, image processing and wavelet transform were employed to assess the uniformity of weld bead height. These parameters were applied to produce intricate parts after identifying optimal parameters that yielded the smoothest weld lines. According to the results, the appropriate bead for manufacturing the part was extracted. The results show that the smoothest bead line is achieved in 27 V as the highest level of voltage, at a 90° nozzle position and the maximum wire feed rate. Parts manufactured using this method across different layers exhibited no distortions, and the repeatability of production substantiated the high reliability of this approach for component manufacturing.
- 29 October 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (21) , 9909
Open AccessEnhancement of Additive Manufacturing Processes for Thin-Walled Part Production Using Gas Metal Arc Welding (GMAW) with Wavelet Transform
Additive manufacturing encompasses technologies that produce three-dimensional computer-aided design (CAD) models through a layer-by-layer production process. Compared to traditional manufacturing methods, additive manufacturing technologies offer significant advantages in producing intricate components with minimal energy consumption, reduced raw material waste, and shortened production timelines. AM methods based on shielded gas welding have recently piqued the interest of researchers due to their high efficiency and cost-effectiveness in manufacturing critical components. However, one of the most formidable challenges in additive manufacturing methods based on shielded gas welding lies in the irregularity of weld bead height at different points, compromising the precision of components produced using these techniques. In this current research, we aimed to achieve uniform weld heights along the welding path by considering the most influential parameters on weld bead geometry and conducting experimental tests. Input parameters of the process, including nozzle angle, welding speed, wire speed, and voltage, were considered. Simultaneously, image processing and wavelet transform were employed to assess the uniformity of weld bead height. These parameters were applied to produce intricate parts after identifying optimal parameters that yielded the smoothest weld lines. According to the results, the appropriate bead for manufacturing the part was extracted. The results show that the smoothest bead line is achieved in 27 V as the highest level of voltage, at a 90° nozzle position and the maximum wire feed rate. Parts manufactured using this method across different layers exhibited no distortions, and the repeatability of production substantiated the high reliability of this approach for component manufacturing.