IAIshraga Galal-Eldin Abdalla Awad

Ishraga Galal-Eldin Abdalla Awad

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ishraga Galal-Eldin Abdalla Awad has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Numerical and Experimental Investigation into the Manufacturing Process of an Inconel 600 Superalloy Shell for Aerospace Ignition Systems

    by Ishraga Galal-Eldin Abdalla Awad, Mahmoud Afshari, Seyed Amirhossein Alavi, Hossein Afshari, Mohammad Reza Samadi, Aseel Smerat, Walid M. Shewakh

    Jet engine spark plugs, which consist of a metal body, insulator, electrode, and adhesive, initiate combustion through an intermittent spark. This research focuses on the production of the plug’s metal shell for the aircraft engine, which was specifically fabricated from the nickel-based superalloy Inconel 600. The manufacturing process was preceded by a numerical simulation in Abaqus to analyze the heat and stress distribution within the spark plug. The spark plug body was then fabricated through sequential CNC turning and electrical discharge machining (EDM) processes. The manufactured sample was evaluated for dimensional accuracy and quality through surface roughness measurement, SEM microstructure analysis, and hardness testing. The minimum achievable surface roughness was attained using distinct optimal parameters for each process. CNC machining required a feed rate of 0.06 mm/rev and a cutting speed of 60 m/min, whereas EDM required a pulse-on time of 5 [Formula: see text]s, a pulse-off time of 4 [Formula: see text]s, an electric current of 8 A, and purified dielectric fluid. The optimization of EDM parameters, notably a shorter pulse-on time and dielectric purification, successfully mitigated microstructural defects like globules, microcracks, and coarse carbides, thereby producing an excellent surface finish. The spark plug fabricated via CNC and EDM machining exhibits density and hardness values equivalent to those of the original Phantom F-5 spark plug.

  • Comprehensive investigation of a novel PLA/EPDM/TiO 2 /CNT nanocomposite produced by selective laser sintering

    by Ishraga Galal-Eldin Abdalla Awad

    This study aims to enhance the electrical, mechanical, and thermal properties of a novel PLA/EPDM/TiO 2 /CNT nanocomposite fabricated by selective laser sintering (SLS). For this purpose, the response surface method (RSM) was employed to examine the effect of the process parameters such as laser power, scan rate, CNTs, and TiO 2 nanoparticles on the melting temperature, crystallization temperature, electrical conductivity, tensile stress, and impact resistance of the nanocomposite. Thermal characterization was conducted via TGA and DSC, whereas electrical and microstructural properties were assessed using a four-probe test and SEM imaging. The results indicate that incorporating CNT and TiO 2 nanoparticles significantly enhanced the material’s thermal stability and electrical conductivity. A homogeneous distribution of nanoparticles within the microstructure was achieved with a 2 wt% concentration of CNT and TiO 2 . Furthermore, minimal porosity and effective solidification were obtained at a laser power of 18 W and a scan rate of 2500 mm/s. The optimization process using RSM and desirability function analysis determined that the optimal parameters for simultaneously improving tensile stress and impact resistance were: 1.8 wt% CNT, 1.9 wt% TiO 2 , a laser power of 16.5 W, and a scan rate of 2624 mm/s.