Xuguang Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xuguang Zhang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Yi Zheng
Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115, USA
7 shared publications - Hexiang Zhang
Department of Mechanical and Industrial Engineering, Northeastern University 1 , Boston, Massachusetts 02115
5 shared publications - Amjad S. Almansour
NASA Glenn Research Center, Cleveland, OH 44135, USA
2 shared publications - Hanqing Liu
Department of Mechanical and Industrial Engineering, Northeastern University 1 , Boston, Massachusetts 02115
2 shared publications - Michael C. Halbig
NASA Glenn Research Center, Cleveland, OH 44135, USA
2 shared publications - Mrityunjay Singh
Ohio Aerospace Institute, Cleveland, OH 44142, USA
2 shared publications
Latest Publications
- Open Access
Geometry-Regulated Thermal Performance of Sedimentation-Stable MicroPCM Composite Capsules for Battery Thermal Management Systems Fabricated via 3D Printing
Thermal management is critical for maintaining the safety and performance of lithium-ion batteries. Phase change materials (PCMs) have been widely studied as passive cooling media due to their high latent heat capacity, but major technical challenges remain due to their relatively low thermal conductivity and nanoparticle sedimentation in composite systems. In this work, a composite phase change material (PCM) consisting of paraffin wax, a microencapsulated phase change material (MicroPCM 28D), and nano carbon black is developed to enhance thermal stability and suppress particle sedimentation through increased viscosity of the PCM matrix. Five capsule geometries fabricated by fused filament fabrication (FFF) 3D printing are experimentally investigated under airflow velocities ranging from 0 to 10 m s−1. Wind tunnel experiments with infrared thermography are used to evaluate the thermal response of the PCM capsules. The results show that airflow velocity and capsule geometry strongly influence heat dissipation behavior. Compared with conventional wax composites, the MicroPCM 28D composite capsules reduce peak temperature by approximately 2–4 °C under airflow velocities of 0–10 m/s. These findings provide insights into geometry-regulated convection and stable composite PCM design for lithium-ion battery thermal management systems.
Open AccessGeometry-Regulated Thermal Performance of Sedimentation-Stable MicroPCM Composite Capsules for Battery Thermal Management Systems Fabricated via 3D Printing
Thermal management is critical for maintaining the safety and performance of lithium-ion batteries. Phase change materials (PCMs) have been widely studied as passive cooling media due to their high latent heat capacity, but major technical challenges remain due to their relatively low thermal conductivity and nanoparticle sedimentation in composite systems. In this work, a composite phase change material (PCM) consisting of paraffin wax, a microencapsulated phase change material (MicroPCM 28D), and nano carbon black is developed to enhance thermal stability and suppress particle sedimentation through increased viscosity of the PCM matrix. Five capsule geometries fabricated by fused filament fabrication (FFF) 3D printing are experimentally investigated under airflow velocities ranging from 0 to 10 m s−1. Wind tunnel experiments with infrared thermography are used to evaluate the thermal response of the PCM capsules. The results show that airflow velocity and capsule geometry strongly influence heat dissipation behavior. Compared with conventional wax composites, the MicroPCM 28D composite capsules reduce peak temperature by approximately 2–4 °C under airflow velocities of 0–10 m/s. These findings provide insights into geometry-regulated convection and stable composite PCM design for lithium-ion battery thermal management systems.
- 2 February 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (5)
Logic computing-derived near-field radiative thermal encryption
This work presents a comprehensive near-field radiative thermal encryption platform that encodes symbolic information using tristate radiative heat-flux distributions across a two-dimensional array of gate terminals. The approach relies on temperature-programmed modulation of near-field radiative heat transfer enabled by phase-change materials placed on the gate of a thermal transistor. By encoding information into spatially varying gate temperatures, the net gate heat transfer can be tuned, which can be modulated and visualized to encode symbolic patterns. Specifically, the word “NEU” was used as an encryption target across several thermal pixels. A temperature permutation was designed to radiate outward from the shape, and radiative heat transfer at the gate was interpolated accordingly using precomputed temperature and radiation relations. To enhance clarity and digital readability, the map was discretized into square grid blocks, each representing an individual logical thermal cell. The results clarify the distinction between the near-field radiative thermal transistor, a physical three-terminal device, and near-field radiative thermal logic computing, the system-level architecture composed of many such devices for spatial logic and encryption. The results address many-body radiative interactions, lateral thermal diffusion, switching and energy considerations, and scalability pathways. Furthermore, the method avoids reliance on external toolboxes, enabling flexible implementation. This framework bridges near-field radiative thermal logic computation and symbolic encryption, offering another paradigm for contactless, reconfigurable, and visually interpretable heat-based information processing.
- 2 February 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (5)
Logic computing-derived near-field radiative thermal encryption
This work presents a comprehensive near-field radiative thermal encryption platform that encodes symbolic information using tristate radiative heat-flux distributions across a two-dimensional array of gate terminals. The approach relies on temperature-programmed modulation of near-field radiative heat transfer enabled by phase-change materials placed on the gate of a thermal transistor. By encoding information into spatially varying gate temperatures, the net gate heat transfer can be tuned, which can be modulated and visualized to encode symbolic patterns. Specifically, the word “NEU” was used as an encryption target across several thermal pixels. A temperature permutation was designed to radiate outward from the shape, and radiative heat transfer at the gate was interpolated accordingly using precomputed temperature and radiation relations. To enhance clarity and digital readability, the map was discretized into square grid blocks, each representing an individual logical thermal cell. The results clarify the distinction between the near-field radiative thermal transistor, a physical three-terminal device, and near-field radiative thermal logic computing, the system-level architecture composed of many such devices for spatial logic and encryption. The results address many-body radiative interactions, lateral thermal diffusion, switching and energy considerations, and scalability pathways. Furthermore, the method avoids reliance on external toolboxes, enabling flexible implementation. This framework bridges near-field radiative thermal logic computation and symbolic encryption, offering another paradigm for contactless, reconfigurable, and visually interpretable heat-based information processing.
- Open Access
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
High-performance near-field radiative thermal logic computing
Comparable to electric circuits, thermal systems can be conceptualized as thermal circuits, where heat transfer serves as the information carrier. This study introduces a near-field radiative thermal logic computing system based on phase change materials (PCMs). By leveraging their temperature-dependent properties, a reconfigurable structure is investigated with a rotatable gate, enabling dynamic control of radiative heat flow for logic operations. The system functions analogously to a thermal transistor, where gate temperature modulates thermal radiation between terminals. Thermal property of each gate surface can be switched between heat absorption and emission states, forming the basis for logic switching. The modular design supports multiple PCM-layer combinations and directional configurations. Notably, the total thermal computing capacity can reach over 24 × 109 distinct states with an integration of five PCMs and a pentagon-type gate. This work advances the development of programmable, non-contact, non-electronic logic systems for nanoscale thermal management and energy-efficient computation.
- 14 July 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (2)
Open AccessHigh-performance near-field radiative thermal logic computing
Comparable to electric circuits, thermal systems can be conceptualized as thermal circuits, where heat transfer serves as the information carrier. This study introduces a near-field radiative thermal logic computing system based on phase change materials (PCMs). By leveraging their temperature-dependent properties, a reconfigurable structure is investigated with a rotatable gate, enabling dynamic control of radiative heat flow for logic operations. The system functions analogously to a thermal transistor, where gate temperature modulates thermal radiation between terminals. Thermal property of each gate surface can be switched between heat absorption and emission states, forming the basis for logic switching. The modular design supports multiple PCM-layer combinations and directional configurations. Notably, the total thermal computing capacity can reach over 24 × 109 distinct states with an integration of five PCMs and a pentagon-type gate. This work advances the development of programmable, non-contact, non-electronic logic systems for nanoscale thermal management and energy-efficient computation.
- Open Access
A Comprehensive Analysis of Thermal Heat Dissipation for Lithium-Ion Battery Packs
Effective thermal management is essential for the safe and efficient operation of lithium-ion battery packs, particularly in compact, airflow-sensitive applications such as drones. This study presents a comprehensive thermal analysis of a 16-cell lithium-ion battery pack by exploring seven geometric configurations under airflow speeds ranging from 0 to 15 m/s and integrating nano-carbon-based phase change materials (PCMs) to enhance heat dissipation. A Computational Fluid Dynamics (CFD) approach was employed using Ansys Discovery and Workbench 2024 R1 to simulate airflow and heat transfer processes with high spatial resolution. Using high-fidelity 3D simulations, we found that the trapezoidal wide-base configuration, combined with a 5-inlet and 1-outlet airflow design, achieved the most balanced cooling performance across all speed regimes. This configuration maintained battery temperatures within the optimal operating range (∼45 °C) in both low- and high-speed airflow conditions, with a maximum temperature reduction of up to 8.3 °C compared to the standard square configuration. Additionally, PCM integration extended the thermal regulation duration to approximately 12.5 min, effectively buffering thermal spikes during peak loads. These findings underscore the critical role of CFD-driven geometric optimization and advanced material integration in designing high-efficiency, compact cooling systems for energy-dense battery applications in drones and portable electronics.
Open AccessA Comprehensive Analysis of Thermal Heat Dissipation for Lithium-Ion Battery Packs
Effective thermal management is essential for the safe and efficient operation of lithium-ion battery packs, particularly in compact, airflow-sensitive applications such as drones. This study presents a comprehensive thermal analysis of a 16-cell lithium-ion battery pack by exploring seven geometric configurations under airflow speeds ranging from 0 to 15 m/s and integrating nano-carbon-based phase change materials (PCMs) to enhance heat dissipation. A Computational Fluid Dynamics (CFD) approach was employed using Ansys Discovery and Workbench 2024 R1 to simulate airflow and heat transfer processes with high spatial resolution. Using high-fidelity 3D simulations, we found that the trapezoidal wide-base configuration, combined with a 5-inlet and 1-outlet airflow design, achieved the most balanced cooling performance across all speed regimes. This configuration maintained battery temperatures within the optimal operating range (∼45 °C) in both low- and high-speed airflow conditions, with a maximum temperature reduction of up to 8.3 °C compared to the standard square configuration. Additionally, PCM integration extended the thermal regulation duration to approximately 12.5 min, effectively buffering thermal spikes during peak loads. These findings underscore the critical role of CFD-driven geometric optimization and advanced material integration in designing high-efficiency, compact cooling systems for energy-dense battery applications in drones and portable electronics.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (9)
Flexible tuning of asymmetric near-field radiative thermal transistor by utilizing distinct phase-change materials
Phase-change materials (PCMs) play a pivotal role in the development of advanced thermal devices due to their reversible phase transitions, which drastically modify their thermal and optical properties. In this study, we present an effective dynamic thermal transistor with an asymmetric design that employs distinct PCMs, vanadium dioxide (VO2), and germanium antimony telluride (GST), on either side of the gate terminal, which is the center of the control unit of the near-field thermal transistor. This asymmetry introduces unique thermal modulation capabilities, taking control of thermal radiation in the near-field regime. VO2 transitions from an insulating to a metallic state, while GST undergoes a reversible switch between amorphous and crystalline phases, each inducing substantial changes in thermal transport properties. By strategically combining these materials, the transistor exhibits enhanced functionality, dynamically switching between states of absorbing and releasing heat by tuning the temperature of gate. This gate terminal not only enables active and efficient thermal management but also provides effective opportunities for manipulating heat flow in radiative thermal circuits. Our findings highlight the potential of such asymmetrically structured thermal transistors in advancing applications across microelectronics, high-speed data processing, and sustainable energy systems, where precise and responsive thermal control is critical for performance and efficiency.
- 1 March 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (9)
Flexible tuning of asymmetric near-field radiative thermal transistor by utilizing distinct phase-change materials
Phase-change materials (PCMs) play a pivotal role in the development of advanced thermal devices due to their reversible phase transitions, which drastically modify their thermal and optical properties. In this study, we present an effective dynamic thermal transistor with an asymmetric design that employs distinct PCMs, vanadium dioxide (VO2), and germanium antimony telluride (GST), on either side of the gate terminal, which is the center of the control unit of the near-field thermal transistor. This asymmetry introduces unique thermal modulation capabilities, taking control of thermal radiation in the near-field regime. VO2 transitions from an insulating to a metallic state, while GST undergoes a reversible switch between amorphous and crystalline phases, each inducing substantial changes in thermal transport properties. By strategically combining these materials, the transistor exhibits enhanced functionality, dynamically switching between states of absorbing and releasing heat by tuning the temperature of gate. This gate terminal not only enables active and efficient thermal management but also provides effective opportunities for manipulating heat flow in radiative thermal circuits. Our findings highlight the potential of such asymmetrically structured thermal transistors in advancing applications across microelectronics, high-speed data processing, and sustainable energy systems, where precise and responsive thermal control is critical for performance and efficiency.
- Open Access
Transparent and Flexible Hierarchical Porous Structure of Polyvinyl Alcohol Aerogel: A Microstructure Study
Aerogels have gained increasing attention due to their unique properties since their introduction in 1932. Silica aerogel, one of the earliest and most advanced types, is known for its high transparency and excellent thermal insulation. However, its internal pearl-like structure makes it extremely brittle, which limits its practical applications. To address this, through multiple refinements in formulation and production techniques, we developed a novel Polyvinyl Alcohol (PVA) aerogel using an innovative one-step standing method. This method significantly reduces the gelling time compared to the freeze–thaw method and eliminates the need for refrigeration, making it a more environmentally friendly and sustainable process. The resulting one-step standing PVA aerogel features a hierarchical porous structure, remarkable transparency, improved strength, and enhanced thermal insulation. Mechanical tests demonstrated that the PVA aerogel produced by the one-step standing method exhibited a significantly higher Young’s modulus of 4.2596 MPa, surpassing that of silica, copper nanowire (Cu NM), and graphene aerogels. Additional tests, including transmittance and thermal analysis, further confirmed that the one-step standing PVA aerogel excels in both transparency and thermal insulation. This combination of improved mechanical performance and light transmission opens novel potential applications, such as drug delivery systems, where the aerogel’s pore structure can store drugs while maintaining strength and transparency.
Open AccessTransparent and Flexible Hierarchical Porous Structure of Polyvinyl Alcohol Aerogel: A Microstructure Study
Aerogels have gained increasing attention due to their unique properties since their introduction in 1932. Silica aerogel, one of the earliest and most advanced types, is known for its high transparency and excellent thermal insulation. However, its internal pearl-like structure makes it extremely brittle, which limits its practical applications. To address this, through multiple refinements in formulation and production techniques, we developed a novel Polyvinyl Alcohol (PVA) aerogel using an innovative one-step standing method. This method significantly reduces the gelling time compared to the freeze–thaw method and eliminates the need for refrigeration, making it a more environmentally friendly and sustainable process. The resulting one-step standing PVA aerogel features a hierarchical porous structure, remarkable transparency, improved strength, and enhanced thermal insulation. Mechanical tests demonstrated that the PVA aerogel produced by the one-step standing method exhibited a significantly higher Young’s modulus of 4.2596 MPa, surpassing that of silica, copper nanowire (Cu NM), and graphene aerogels. Additional tests, including transmittance and thermal analysis, further confirmed that the one-step standing PVA aerogel excels in both transparency and thermal insulation. This combination of improved mechanical performance and light transmission opens novel potential applications, such as drug delivery systems, where the aerogel’s pore structure can store drugs while maintaining strength and transparency.
- Open Access
Photonic-Metamaterial-Based, Near-Field-Enhanced Biosensing Approach for Early Detection of Lung and Ovarian Cancer
Early detection of lung and ovarian cancers relies heavily on identifying tumor biomarkers, but current methods require large blood samples and complex genetic testing. This study presents a novel photonic-metamaterial-based biosensing approach that leverages near-field radiative enhancement to detect cancer biomarkers (CA 125, CEA, and CYFRA 21-1) with high sensitivity. By utilizing structured photonic metamaterials, we optimize specific wavelengths to identify these biomarkers in interstitial fluid, which can be easily collected via minimally invasive microneedle arrays. Integrating near-field interactions with wavelength-selective metamaterials amplifies the thermal response at the nanoscale, allowing for the detection of deficient concentrations of biomarkers. This photonic metamaterial technique provides a faster, more accessible, and affordable alternative to conventional blood-based methods, significantly improving early detection and monitoring of cancer. Ultimately, this approach offers a transformative tool for clinical and research applications in cancer diagnostics.
Open AccessPhotonic-Metamaterial-Based, Near-Field-Enhanced Biosensing Approach for Early Detection of Lung and Ovarian Cancer
Early detection of lung and ovarian cancers relies heavily on identifying tumor biomarkers, but current methods require large blood samples and complex genetic testing. This study presents a novel photonic-metamaterial-based biosensing approach that leverages near-field radiative enhancement to detect cancer biomarkers (CA 125, CEA, and CYFRA 21-1) with high sensitivity. By utilizing structured photonic metamaterials, we optimize specific wavelengths to identify these biomarkers in interstitial fluid, which can be easily collected via minimally invasive microneedle arrays. Integrating near-field interactions with wavelength-selective metamaterials amplifies the thermal response at the nanoscale, allowing for the detection of deficient concentrations of biomarkers. This photonic metamaterial technique provides a faster, more accessible, and affordable alternative to conventional blood-based methods, significantly improving early detection and monitoring of cancer. Ultimately, this approach offers a transformative tool for clinical and research applications in cancer diagnostics.