Anatolii Poliakov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Anatolii Poliakov has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Andrey Andreev
Zaporizhzhia National University
2 shared publications - Dmytro Ivanchenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications - Dmytro Zhuravel
Таврійський державний агротехнологічний університет імені Дмитра Моторного
2 shared publications - I. V. Lukianenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications - Iryna Kovalenko
National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute
2 shared publications - Mykhail Yamshinskij
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” (Kyiv, Ukraine)
2 shared publications
Latest Publications
- Open Access
- 27 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (12 (136)) , 6-11
Establishing patterns of structural-phase transformations when processing technogenic waste of high-speed steels by carbon thermal reduction
The object of this study is structural and phase transformations during the reduction of high-speed steel scale with carbon to obtain a resource-saving alloying additive. The task addressed is the loss of high-value elements when obtaining and using alloying material from man-made raw materials. Solving the problem is associated with determining technological indicators to enable the reduction of losses of the corresponding elements. It has been determined that the phase composition of the scale had the manifestation of FeO, Fe2O3, Fe3O4, FeWO4, MoO2, FeW3C, W2C and Mo2C. In the reduction products, a solid solution of alloying elements and carbon in α-Fe, residual oxides Fe2O3, Fe3O4 and carbides FeW3C, WC, Mo2C, Cr7C3, Cr3C2, Cr23C6, VC was found. The disordered structure of the scale with particles of irregular shape after reduction was characterized by the presence of formations of polyhedral and rounded shapes with different contents of alloying elements. Residual oxygen was within 5.78–7.14% by weight. It was established that achieving a reduction degree of 79% is sufficient since the residual carbon in carbides provides an increased reducing ability during the further reduction of the oxide component in the liquid metal during alloying. The porous structure causes faster dissolution compared to standard ferroalloys, which reduces the resources consumed by reducing the melting time. No phases with an increased tendency to sublimation were found in the obtained alloying additive. That is, there is no need to create additional conditions that prevent the loss of alloying elements during evaporation with the gas phase, which ensures an increase in the degree of extraction of the corresponding elements. The properties of the obtained alloying additive allow it to be used in smelting in an electric arc furnace as a replacement for part of standard ferroalloys
- 27 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (12 (136)) , 6-11
Open AccessEstablishing patterns of structural-phase transformations when processing technogenic waste of high-speed steels by carbon thermal reduction
The object of this study is structural and phase transformations during the reduction of high-speed steel scale with carbon to obtain a resource-saving alloying additive. The task addressed is the loss of high-value elements when obtaining and using alloying material from man-made raw materials. Solving the problem is associated with determining technological indicators to enable the reduction of losses of the corresponding elements. It has been determined that the phase composition of the scale had the manifestation of FeO, Fe2O3, Fe3O4, FeWO4, MoO2, FeW3C, W2C and Mo2C. In the reduction products, a solid solution of alloying elements and carbon in α-Fe, residual oxides Fe2O3, Fe3O4 and carbides FeW3C, WC, Mo2C, Cr7C3, Cr3C2, Cr23C6, VC was found. The disordered structure of the scale with particles of irregular shape after reduction was characterized by the presence of formations of polyhedral and rounded shapes with different contents of alloying elements. Residual oxygen was within 5.78–7.14% by weight. It was established that achieving a reduction degree of 79% is sufficient since the residual carbon in carbides provides an increased reducing ability during the further reduction of the oxide component in the liquid metal during alloying. The porous structure causes faster dissolution compared to standard ferroalloys, which reduces the resources consumed by reducing the melting time. No phases with an increased tendency to sublimation were found in the obtained alloying additive. That is, there is no need to create additional conditions that prevent the loss of alloying elements during evaporation with the gas phase, which ensures an increase in the degree of extraction of the corresponding elements. The properties of the obtained alloying additive allow it to be used in smelting in an electric arc furnace as a replacement for part of standard ferroalloys
- Open Access
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (12 (131)) , 25-30
Identifying patterns in the structural-phase transformations when processing oxide doped waste with the use of carbon reducer
The object of this study is the structural and phase transformations during the carbon reduction of tungsten high-speed steel slag in order to obtain a resource-saving alloying additive. The problem is the loss of precious elements when obtaining and using alloying material from man-made raw materials. Solving the problem is related to the definition of technological parameters to enable the reduction of losses of the corresponding elements. As a result of increasing the degree of scale reduction from 33 % to 72 % and 85 %, the strengthening of the manifestation of the solid solution of carbon and alloying elements in α-Fe relative to FeWO4, FeO and Fe3O4 was revealed. Fe3C, WC, W2C, FeW3C, Fe3W3C, Fe6W6C, VC, V2C, Cr3C2, Cr7C3 and Cr23C6 also appeared. Along with this, rounded and multifaceted particles with different chemical composition and the formation of a spongy microstructure were found. It was established that the most acceptable degree of recovery is 85 %. But achieving a recovery rate of 72 % is also sufficient. This is explained by the fact that the residual carbon in the carbides provides an increased reducing capacity, which is realized during the further reduction of oxides in the liquid metal during alloying. The spongy microstructure results in faster dissolution in contrast to standard ferroalloys, which provides a reduction in melting time while reducing spent resources. No phases with an increased tendency to sublimation were found in the obtained alloying material. That is, no additional conditions are needed that restrain the loss of alloying elements during evaporation with a gaseous phase, which provides an increase in the degree of extraction of the corresponding elements. The properties of the resulting alloying material make it possible to use it in metallurgical production when smelting alloyed steel grades in an electric arc furnace, the composition of which does not have strict restrictions on the carbon content
- 30 October 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (12 (131)) , 25-30
Open AccessIdentifying patterns in the structural-phase transformations when processing oxide doped waste with the use of carbon reducer
The object of this study is the structural and phase transformations during the carbon reduction of tungsten high-speed steel slag in order to obtain a resource-saving alloying additive. The problem is the loss of precious elements when obtaining and using alloying material from man-made raw materials. Solving the problem is related to the definition of technological parameters to enable the reduction of losses of the corresponding elements. As a result of increasing the degree of scale reduction from 33 % to 72 % and 85 %, the strengthening of the manifestation of the solid solution of carbon and alloying elements in α-Fe relative to FeWO4, FeO and Fe3O4 was revealed. Fe3C, WC, W2C, FeW3C, Fe3W3C, Fe6W6C, VC, V2C, Cr3C2, Cr7C3 and Cr23C6 also appeared. Along with this, rounded and multifaceted particles with different chemical composition and the formation of a spongy microstructure were found. It was established that the most acceptable degree of recovery is 85 %. But achieving a recovery rate of 72 % is also sufficient. This is explained by the fact that the residual carbon in the carbides provides an increased reducing capacity, which is realized during the further reduction of oxides in the liquid metal during alloying. The spongy microstructure results in faster dissolution in contrast to standard ferroalloys, which provides a reduction in melting time while reducing spent resources. No phases with an increased tendency to sublimation were found in the obtained alloying material. That is, no additional conditions are needed that restrain the loss of alloying elements during evaporation with a gaseous phase, which provides an increase in the degree of extraction of the corresponding elements. The properties of the resulting alloying material make it possible to use it in metallurgical production when smelting alloyed steel grades in an electric arc furnace, the composition of which does not have strict restrictions on the carbon content