Uttara Kumar
Uttara Kumar has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Aaron M. Rimpel
Southwest Research Institute , 6220 Culebra Road, San Antonio, TX 78238
1 shared publication Bugra Ertas
General Electric Co., Evandale, OH (United States). Aerospace
1 shared publication- Collin Rambacher
GE Aerospace Research , 1 Research Circle, Niskayuna, NY 12309
1 shared publication - Deepak Trivedi
GE Aerospace Research , 1 Research Circle, Niskayuna, NY 12309
1 shared publication - Jeremy Johnson
Southwest Research Institute , 6220 Culebra Road, San Antonio, TX 78238
1 shared publication Keith Gary
General Electric Co., Evandale, OH (United States). Aerospace
1 shared publication
Latest Publications
- 20 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-38
Development of Large-Diameter Hybrid Film-Riding Seals for Supercritical Carbon Dioxide Turbines
Compared to traditional labyrinth seals, film-riding face seals are worth 0.55-0.65% points efficiency for utility-scale supercritical carbon dioxide (sCO2) turbines. Conventional dry gas seals (DGS) cannot be used at such large diameters due to manufacturability limitations as well as mechanical deformations. Hybrid film-riding face seals are excellent compromise candidates that can operate at large diameters with slightly increased albeit leakier films. This paper presents the development and test data for a hybrid face seal developed for the utility-scale sCO2 turbine application. A high-level overview of the seal design considerations is presented followed by test data on three seals – a small-size seal (5.7 in diameter), an intermediate-size seal (14-in diameter) and two full-size seals (24 in diameter) tested over a range of pressures and temperatures with both air and CO2 as the working fluid. This paper presents non-dimensional seal film thickness and seal leakage (effective clearance) data as a function of the pressure ratios, speed and temperature. The film thickness measurements presented in this paper agree well with the CFD-based film thickness predictions. The measured seal effective clearance for the seals was around 0.001 in (0.0254 mm) effective clearance, which is better than published data on aerostatic face seals and less risky compared to traditional DGS. Rotating test data across all three length scales presented in this work show successful laboratory-scale seal operation for the newly-design hybrid face seals.
- 20 November 2024
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 147 (2) , 1-38
Development of Large-Diameter Hybrid Film-Riding Seals for Supercritical Carbon Dioxide Turbines
Compared to traditional labyrinth seals, film-riding face seals are worth 0.55-0.65% points efficiency for utility-scale supercritical carbon dioxide (sCO2) turbines. Conventional dry gas seals (DGS) cannot be used at such large diameters due to manufacturability limitations as well as mechanical deformations. Hybrid film-riding face seals are excellent compromise candidates that can operate at large diameters with slightly increased albeit leakier films. This paper presents the development and test data for a hybrid face seal developed for the utility-scale sCO2 turbine application. A high-level overview of the seal design considerations is presented followed by test data on three seals – a small-size seal (5.7 in diameter), an intermediate-size seal (14-in diameter) and two full-size seals (24 in diameter) tested over a range of pressures and temperatures with both air and CO2 as the working fluid. This paper presents non-dimensional seal film thickness and seal leakage (effective clearance) data as a function of the pressure ratios, speed and temperature. The film thickness measurements presented in this paper agree well with the CFD-based film thickness predictions. The measured seal effective clearance for the seals was around 0.001 in (0.0254 mm) effective clearance, which is better than published data on aerostatic face seals and less risky compared to traditional DGS. Rotating test data across all three length scales presented in this work show successful laboratory-scale seal operation for the newly-design hybrid face seals.
- Open Access
- 11 March 2024
- Published by Office of Scientific and Technical Information (OSTI)
Reduced LCoE CSP Through Utilizing Process Gas Lubricated Bearings in Oil-Free Drivetrains
The GE Research team proposed to advance the TRL level of process lubricated gas bearings from TRL3 based on the DE-EE0007109 program to TRL5 addressing a critical risk item that radial gas bearings can provide satisfactory rotordynamic performance in supporting a representative rotor for sCO2 Power Cycles. The ability to apply process lubricated gas bearings can provide cost savings with reduction of the associated lube oil systems and an efficiency benefit worth 2% efficiency for the turbomachinery configuration first presented in DE-EE005804. The process lubricated gas bearings are enablers for advanced hermetically sealed configurations that have the potential for significant advancement in sCO2 Power Cycles for CSP applications including the 2% efficiency increase referred to above in addition to OPEX savings with no need to refill the CO2 valued at $60k/yr and cost reductions of $50/kWe all leading to a potential 0.95¢/kWh reduction positively impacting CSP goals.
- 11 March 2024
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessReduced LCoE CSP Through Utilizing Process Gas Lubricated Bearings in Oil-Free Drivetrains
The GE Research team proposed to advance the TRL level of process lubricated gas bearings from TRL3 based on the DE-EE0007109 program to TRL5 addressing a critical risk item that radial gas bearings can provide satisfactory rotordynamic performance in supporting a representative rotor for sCO2 Power Cycles. The ability to apply process lubricated gas bearings can provide cost savings with reduction of the associated lube oil systems and an efficiency benefit worth 2% efficiency for the turbomachinery configuration first presented in DE-EE005804. The process lubricated gas bearings are enablers for advanced hermetically sealed configurations that have the potential for significant advancement in sCO2 Power Cycles for CSP applications including the 2% efficiency increase referred to above in addition to OPEX savings with no need to refill the CO2 valued at $60k/yr and cost reductions of $50/kWe all leading to a potential 0.95¢/kWh reduction positively impacting CSP goals.