Wenjia Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Wenjia Xiao has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Baolin Yan
Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology, Foshan University, Foshan 528001, China
1 shared publication - Guanghui Shao
Datang Boiler and Pressure Vessel Inspection Center Co., Ltd., Hefei 231200, China
1 shared publication - Guoyu Yang
Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology, School of Mechatronic Engineering and Automation, Foshan University, Foshan 528225, China
1 shared publication - Hang Liu
Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology, Foshan University, Foshan 528001, China
1 shared publication - Huayu Che
Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology, School of Mechatronic Engineering and Automation, Foshan University, Foshan 528225, China
1 shared publication - Hui Xiao
Guangdong Provincial Key Laboratory of Industrial Intelligent Inspection Technology, Foshan University, Foshan 528000, China
1 shared publication
Latest Publications
- Open Access
- 18 November 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (11) , 518
Effects of Fe Content on Microstructure, Mechanical Properties, and Corrosion Resistance of FexCrNi(AlTi)0.2 Entropy Alloy Prepared by Laser Melting Deposition Technology
To improve the comprehensive mechanical properties of FexCrNi(AlTi)0.2 medium-entropy alloys, laser melting deposition (LMD) was employed as the fabrication method. By varying the Fe content, the effects of Fe concentration on the microstructure, mechanical properties, and corrosion resistance of FexCrNi(AlTi)0.2 (x = 1, 2, 3, 4, and 5) medium-entropy alloys were systematically investigated. The results indicate that the fraction of the BCC phase gradually decreases with increasing Fe content. In particular, the Fe5 alloy exhibits a high density of fine BCC precipitates within the FCC grains. Furthermore, the tensile yield strength at room temperature decreases with increasing Fe content, and a similar trend is observed in a 3.5 wt.% NaCl solution. Within a certain Fe content range, increasing the Fe content effectively improves the elongation at fracture. Among the investigated alloys, Fe2 exhibits the best comprehensive mechanical performance, with yield strengths of 837 ± 10 MPa at room temperature and 845 ± 14 MPa in a 3.5 wt.% NaCl solution. The corresponding elongations at fracture are 41.8 ± 0.5% and 30.9 ± 0.5%, respectively, indicating relatively stable mechanical performance under different environments. In addition, the resistance of the alloys to both uniform and localized corrosion gradually decreases with increasing Fe content. Nevertheless, spontaneous passivation occurs in the 3.5 wt.% NaCl solution, resulting in the formation of a protective passive film.
- 18 November 2026
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 10 (11) , 518
Open AccessEffects of Fe Content on Microstructure, Mechanical Properties, and Corrosion Resistance of FexCrNi(AlTi)0.2 Entropy Alloy Prepared by Laser Melting Deposition Technology
To improve the comprehensive mechanical properties of FexCrNi(AlTi)0.2 medium-entropy alloys, laser melting deposition (LMD) was employed as the fabrication method. By varying the Fe content, the effects of Fe concentration on the microstructure, mechanical properties, and corrosion resistance of FexCrNi(AlTi)0.2 (x = 1, 2, 3, 4, and 5) medium-entropy alloys were systematically investigated. The results indicate that the fraction of the BCC phase gradually decreases with increasing Fe content. In particular, the Fe5 alloy exhibits a high density of fine BCC precipitates within the FCC grains. Furthermore, the tensile yield strength at room temperature decreases with increasing Fe content, and a similar trend is observed in a 3.5 wt.% NaCl solution. Within a certain Fe content range, increasing the Fe content effectively improves the elongation at fracture. Among the investigated alloys, Fe2 exhibits the best comprehensive mechanical performance, with yield strengths of 837 ± 10 MPa at room temperature and 845 ± 14 MPa in a 3.5 wt.% NaCl solution. The corresponding elongations at fracture are 41.8 ± 0.5% and 30.9 ± 0.5%, respectively, indicating relatively stable mechanical performance under different environments. In addition, the resistance of the alloys to both uniform and localized corrosion gradually decreases with increasing Fe content. Nevertheless, spontaneous passivation occurs in the 3.5 wt.% NaCl solution, resulting in the formation of a protective passive film.
- Open Access
Microstructure Evolution and Solute Segregation of Inconel 718 in Laser Additive Manufacturing: A Numerical and Experimental Investigation
The segregation of brittle Laves phases remains a critical bottleneck limiting the performance of additive manufacturing (AM) nickel-based superalloys. While its evolution is governed by complex transient physical fields within the melt pool, a quantitative kinetic correlation between processing parameters and microstructural features is currently lacking. In this study, a high-fidelity multiphysics numerical model was developed to establish a cross-scale mapping logic of “Process-Physical Field-Microstructure” by dissecting the global distribution of temperature gradient (G) and solidification rate (R) along the quasi-steady-state melt pool boundary. It is revealed that increasing the scanning speed synergistically enhances R while compressing G. Beyond driving a transition from oriented columnar dendrites to refined mixed-dendritic structures, this shift effectively blocks the continuous enrichment channels of Nb and Mo elements by compressing the “kinetic time window” for solute redistribution. Consequently, the morphology of the Laves phase is forced to evolve from a continuous interconnected chain-like network into dispersed isolated particles. This research clarifies the kinetic essence of microstructural evolution under non-equilibrium solidification, providing critical physical criteria for the precise intervention of deleterious phases and the regulation of microstructural consistency in high-performance AM components.
Open AccessMicrostructure Evolution and Solute Segregation of Inconel 718 in Laser Additive Manufacturing: A Numerical and Experimental Investigation
The segregation of brittle Laves phases remains a critical bottleneck limiting the performance of additive manufacturing (AM) nickel-based superalloys. While its evolution is governed by complex transient physical fields within the melt pool, a quantitative kinetic correlation between processing parameters and microstructural features is currently lacking. In this study, a high-fidelity multiphysics numerical model was developed to establish a cross-scale mapping logic of “Process-Physical Field-Microstructure” by dissecting the global distribution of temperature gradient (G) and solidification rate (R) along the quasi-steady-state melt pool boundary. It is revealed that increasing the scanning speed synergistically enhances R while compressing G. Beyond driving a transition from oriented columnar dendrites to refined mixed-dendritic structures, this shift effectively blocks the continuous enrichment channels of Nb and Mo elements by compressing the “kinetic time window” for solute redistribution. Consequently, the morphology of the Laves phase is forced to evolve from a continuous interconnected chain-like network into dispersed isolated particles. This research clarifies the kinetic essence of microstructural evolution under non-equilibrium solidification, providing critical physical criteria for the precise intervention of deleterious phases and the regulation of microstructural consistency in high-performance AM components.
- Open Access
Microstructure Control and Hot Cracking Prevention During Laser Additive Manufacturing of Cobalt-Based Superalloy
Hot cracking is a frequent and severe defect that occurs during laser additive manufacturing of superalloys. In this work, a pulsed-wave (PW) laser modulation process was employed to control the solidification microstructure and reduce the hot cracking susceptibility of laser additive manufactured cobalt-based superalloy. The effects of continuous-wave (CW) and PW laser processing modes on the dendrite morphology, element segregation, eutectic phase, and hot cracking of fabricated Co-based superalloys were investigated. Optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to characterize the microstructural characteristics of samples. A two-color pyrometer was used to measure the molten pool temperature variation under different laser processing modes. The results show that coarse columnar dendrites, chain-like eutectic carbides, and hot cracks were observed in the CW sample. In contrast, the fine equiaxed crystals, discrete eutectic carbides, and low-level residual stresses were obtained to avoid hot cracks, owing to the high cooling rate and the periodic melting and solidification of the molten pool under the PW laser processing mode. This work provides a new method for controlling solidification structure and hot cracking of laser additive manufactured Co-based superalloy.
Open AccessMicrostructure Control and Hot Cracking Prevention During Laser Additive Manufacturing of Cobalt-Based Superalloy
Hot cracking is a frequent and severe defect that occurs during laser additive manufacturing of superalloys. In this work, a pulsed-wave (PW) laser modulation process was employed to control the solidification microstructure and reduce the hot cracking susceptibility of laser additive manufactured cobalt-based superalloy. The effects of continuous-wave (CW) and PW laser processing modes on the dendrite morphology, element segregation, eutectic phase, and hot cracking of fabricated Co-based superalloys were investigated. Optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy were used to characterize the microstructural characteristics of samples. A two-color pyrometer was used to measure the molten pool temperature variation under different laser processing modes. The results show that coarse columnar dendrites, chain-like eutectic carbides, and hot cracks were observed in the CW sample. In contrast, the fine equiaxed crystals, discrete eutectic carbides, and low-level residual stresses were obtained to avoid hot cracks, owing to the high cooling rate and the periodic melting and solidification of the molten pool under the PW laser processing mode. This work provides a new method for controlling solidification structure and hot cracking of laser additive manufactured Co-based superalloy.