FHFeng He

Feng He

*This is an algorithmically generated author record based on publicly available information.

Feng He has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Investigation on Degradation of Switching Characteristics in SiC MOSFETs Under Repetitive Surge Current

    by Zhichao Cheng, Ling Sang, Feng He, Yawei He, Zheyang Li, Rui Jin, Peng Cui

    Surge reliability is a crucial aspect of silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) reliability. This study investigates the degradation behavior and mechanisms of switching characteristics in 1.2 kV planar-gate SiC MOSFETs under repetitive surge current. A surge current test platform is established to conduct surge tests on the device, while monitoring the evolution of its switching characteristics. The results indicate that after 4000 surge current cycles, the device’s turn-on delay time (td(on)), rise time (tr), and turn-on loss (EON) show no significant changes. In contrast, the turn-off delay time (td(off)), fall time (tf), and turn-off loss (EOFF) increase by 9%, 7.5%, and 8.3%, respectively. Switching characteristics variations are closely linked to the reduction in threshold voltage (VTH) and the increase in gate-source capacitance (CGS) and gate-drain capacitance (CGD). The degradation of these parameters stems from the accumulation of positive trapped charge in the gate oxide layer above the channel and junction field-effect transistor (JFET) region. The increase in charges results from the combined effects of negative gate bias and cyclic high temperature induced by repetitive surge current. This study provides a theoretical basis for the comprehensive understanding of the impact of surge current on SiC MOSFET performance.


  • Open Access

    Short-Circuit Characteristic Analysis of SiC Trench MOSFETs with Dual Integrated Schottky Barrier Diodes

    by Ling Sang, Xiping Niu, Zhanwei Shen, Yu Huang, Xuan Tang, Kaige Huang, Jinyi Xu, Yawei He, Feng He, Zheyang Li, et al.

    A 4H-silicon carbide (SiC) trench gate metal–oxide–semiconductor field-effect transistor (MOSFET) with dual integrated Schottky barrier diodes (SBDs) was characterized using numerical simulations. The advantage of three-dimensional stacked integration is that it allows the proposed structure to obtain an electric field of below 0.6 MV/cm in the gate oxide and SBD contacts and achieve ~10% lower forward voltage of SBDs than the planar gate SBD-integrated MOSFET (PSI-MOS) and the trench gate structure with three p-type-protecting layers (TPL-MOS). The dual-SBD-integrated MOSFET (DSI-MOS) also highlights the better influences of the more than 70% reduction in the miller charge, as well as the over 50% reduction in switching loss compared to the others. Furthermore, the short-circuit (SC) robustness of the three devices was identified. The DSI-MOS attains the critical energy and the aluminum melting point in a longer SC time interval than the TPL-MOS. The p-shield layers in the DSI-MOS are demonstrated to yield the huge benefit of improving the reliability of the contacts when SC reliability is considered.


  • Open Access

    A Novel SiC Vertical Planar MOSFET Design and Optimization for Improved Switching Performance

    by Rui Jin, Zheyang Li, Shijie Liu, Ling Sang, Xiran Chen, Handoko Linewih, Yu Zhong, Feng He, Yawei He, Jisheng Han

    A novel cell topology for a vertical 1200 V SiC planar double-implanted MOSFET (DMOSFET) is proposed in this work. Based on the conventional linear cell topology and the calibrated two-dimensional (2D) technology computer-aided design (TCAD) model parameters, a novel cell topology with the insertion of P+ body implanted regions over a fractional part of the channel and junction field effect transistor (JFET) regions was designed and optimized to achieve a low high-frequency figure of merit (HF-FOM, Ron × Cgd). Utilizing three-dimensional (3D) TCAD simulations, the new proposed cell topology with optimized selected structure parameters exhibits an HF-FOM of 328.748 mΩ·pF, which is 10.02% lower than the conventional linear topology. It also shows an improvement in the switching performance, with an 11.73% reduction in switching loss. Moreover, the impact of source ohmic contact resistivity on the performance of the proposed cell topology was highlighted, indicating the dependency of the source ohmic contact resistivity on the switching performance. This research provides a new perspective for enhancing the switching performance of SiC MOSFETs in high-frequency applications, considering practical factors such as contact resistivity.


  • Open Access

    Integrated Junction Barrier Schottky Diode and MOS-Channel Diode in SiC Planar MOSFETs for Optimization of Reverse Performances

    by Xinyu Li, Feng He, Xiping Niu, Ling Sang, Yawei He, Kaixuan Xu, Yan Tian, Xintian Zhou, Yunpeng Jia, Rui Jin

    A novel planar silicon carbide (SiC) MOSFET integrated with both MOS-channel diode (MCD) and junction barrier Schottky diode (JBS) on the same chip (MCD-JBSFET) is proposed and investigated through Technology Computer-Aided Design (TCAD) simulations in this paper. The proposed device features the lowest turn-on voltage and the best current conduction capability under the reverse-biased conditions, allowing it to achieve the same reverse conduction capability with fewer MCDs compared to conventional MOSFET with MCD structures (MCDFET). This reduction in the number of MCDs enables more channels to operate under forward-biased conditions, thereby improving power density. Compared to a conventional MOSFET integrated with JBS structure (JBSFET), the reverse current in the MCD-JBSFET flows through both the MCD and JBS, which suppresses the peak lattice temperature at Schottky contact and enhances the high-temperature robustness, especially under surge current conditions. In addition, the split-gate structure in the proposed structure optimizes the reverse capacitance and the figure of merit Ron,sp × Qg by factors of 0.65 and 2.15, respectively. Finally, the switching losses are reduced by 40.2%, indicating the suitability of MCD-JBSFET for high-frequency and high-current applications.