Huiwen Deng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Huiwen Deng has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Huiyun Liu
Department of Electronic and Electrical Engineering, University College London, Torrington Place, London WC1E 7JE, UK
11 shared publications - Mingchu Tang
University College London
11 shared publications - Hui Jia
University College London
7 shared publications - Alwyn J. Seeds
Department of Electronic and Electrical Engineering, University College London, London, UK
5 shared publications - Haotian Zeng
University College London
5 shared publications - Calum Dear
Department of Electronic and Electrical Engineering, University College London, London, U.K.
3 shared publications
Latest Publications
- Open Access
- 1 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (1)
Modeling threading dislocation density evolution in Ge/Si during cyclic annealing
A compact kinetic framework is developed to describe threading dislocation evolution in Ge/Si buffers by linking the final dislocation density to the initial defect level and an Arrhenius-weighted thermal budget that captures the combined effects of temperature, annealing time, and layer geometry. Despite extensive experimental progress in Ge-on-Si integration, optimization of growth and annealing parameters remains largely empirical, owing to the lack of a framework connecting processing conditions to defect evolution. Calibrated against electron channeling contrast imaging measurements from undoped and Sb-doped Ge/Si buffers with different annealing cycle counts, the model captures the overall reduction and saturation trends across the wafer set. This compact framework provides a practical means of assessing how initial defect density and accumulated thermal exposure influence final threading dislocation levels in thin Ge/Si buffers.
- 1 July 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (1)
Open AccessModeling threading dislocation density evolution in Ge/Si during cyclic annealing
A compact kinetic framework is developed to describe threading dislocation evolution in Ge/Si buffers by linking the final dislocation density to the initial defect level and an Arrhenius-weighted thermal budget that captures the combined effects of temperature, annealing time, and layer geometry. Despite extensive experimental progress in Ge-on-Si integration, optimization of growth and annealing parameters remains largely empirical, owing to the lack of a framework connecting processing conditions to defect evolution. Calibrated against electron channeling contrast imaging measurements from undoped and Sb-doped Ge/Si buffers with different annealing cycle counts, the model captures the overall reduction and saturation trends across the wafer set. This compact framework provides a practical means of assessing how initial defect density and accumulated thermal exposure influence final threading dislocation levels in thin Ge/Si buffers.
- Open Access
- 20 February 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (4)
High‐Temperature Operation of All‐Molecular Beam Epitaxy InAs/GaAs Quantum Dot Lasers on V‐Grooved Si (001)
Realising thermally stable, one‐step‐grown InAs/GaAs quantum dot (QD) lasers on standard Si (001) is pivotal for cost‐effective and streamlined monolithic Si photonics. However, current state‐of‐the‐art solutions predominantly rely on hybrid growth schemes using virtual substrates, which introduce high costs and limit scalability. Here, we report thermally reliable, high‐performance QD lasers directly integrated on V‐grooved Si (001) substrates using a one‐step all‐molecular beam epitaxy (MBE) approach. By preserving V‐groove structural integrity and employing improved facet quality and cavity geometry optimisation, a significant enhancement in high‐temperature operation is realised. The as‐cleaved 5 × 2000 µm 2 device exhibits a room‐temperature threshold current of 42 mA and sustains lasing up to 150°C under pulsed injection, comparable to state‐of‐the‐art hybrid devices utilising facet coatings. Continuous‐wave operation is achieved up to 70°C with a room‐temperature threshold current of 73 mA. These results demonstrate the viability of the one‐step, all‐MBE V‐groove approach for realising thermally reliable, cost‐effective, and scalable monolithic light source on Si photonics platforms.
- 20 February 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (4)
Open AccessHigh‐Temperature Operation of All‐Molecular Beam Epitaxy InAs/GaAs Quantum Dot Lasers on V‐Grooved Si (001)
Realising thermally stable, one‐step‐grown InAs/GaAs quantum dot (QD) lasers on standard Si (001) is pivotal for cost‐effective and streamlined monolithic Si photonics. However, current state‐of‐the‐art solutions predominantly rely on hybrid growth schemes using virtual substrates, which introduce high costs and limit scalability. Here, we report thermally reliable, high‐performance QD lasers directly integrated on V‐grooved Si (001) substrates using a one‐step all‐molecular beam epitaxy (MBE) approach. By preserving V‐groove structural integrity and employing improved facet quality and cavity geometry optimisation, a significant enhancement in high‐temperature operation is realised. The as‐cleaved 5 × 2000 µm 2 device exhibits a room‐temperature threshold current of 42 mA and sustains lasing up to 150°C under pulsed injection, comparable to state‐of‐the‐art hybrid devices utilising facet coatings. Continuous‐wave operation is achieved up to 70°C with a room‐temperature threshold current of 73 mA. These results demonstrate the viability of the one‐step, all‐MBE V‐groove approach for realising thermally reliable, cost‐effective, and scalable monolithic light source on Si photonics platforms.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (2: 3-D Hor) , 1-12
InAs/InAlGaAs Quantum Dot Lasers on InP and Si
We report the development of InAs/InAlGaAs quantum-dot (QD) lasers grown on both InP and Si substrates. A modified indium flush technique was employed to control dot-height distribution and tailor the emission wavelength by using a strained partial capping layer. Using this approach, 7-stack InAs/InAlGaAs QD lasers on InP substrates exhibit a low threshold current density (Jth) of 63 A/cm2 per QD layer and high-temperature operation up to 140 °C. Furthermore, electrically pumped InAs/InAlGaAs QD lasers directly grown on Si are also demonstrated, with a low Jth of 1.35 kA/cm2 and a maximum operating temperature of 100 °C. This work highlights the effectiveness of the modified indium flush in achieving high-performance InAs/InAlGaAs QD lasers. These results represent a significant step forward in the development of high-performance C-/L-band QD lasers in the InAs/InAlGaAs/InP material system for Si photonics.
- 8 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Selected Topics in Quantum Electronics
- Vol. 32 (2: 3-D Hor) , 1-12
InAs/InAlGaAs Quantum Dot Lasers on InP and Si
We report the development of InAs/InAlGaAs quantum-dot (QD) lasers grown on both InP and Si substrates. A modified indium flush technique was employed to control dot-height distribution and tailor the emission wavelength by using a strained partial capping layer. Using this approach, 7-stack InAs/InAlGaAs QD lasers on InP substrates exhibit a low threshold current density (Jth) of 63 A/cm2 per QD layer and high-temperature operation up to 140 °C. Furthermore, electrically pumped InAs/InAlGaAs QD lasers directly grown on Si are also demonstrated, with a low Jth of 1.35 kA/cm2 and a maximum operating temperature of 100 °C. This work highlights the effectiveness of the modified indium flush in achieving high-performance InAs/InAlGaAs QD lasers. These results represent a significant step forward in the development of high-performance C-/L-band QD lasers in the InAs/InAlGaAs/InP material system for Si photonics.
- 2 November 2025
- Published by Elsevier in Applied Surface Science
- Vol. 719
Thermodynamics of stacking faults in GaAs-based system revealed by in-situ heating in TEM
- 2 November 2025
- Published by Elsevier in Applied Surface Science
- Vol. 719
Thermodynamics of stacking faults in GaAs-based system revealed by in-situ heating in TEM
- Open Access
- 1 November 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (11)
Ge-rich homogenous GeSi alloying induced by Si–Ge interdiffusion under high temperature thermal cyclic annealing
Thermal cyclic annealing (TCA) is recognized as the key process in improving Ge film quality during epitaxial growth on Si substrates. In Ge-on-Si systems, annealing temperatures rarely exceed 900 °C due to the limitation of the Ge melting point (938 °C). In this study, ultra-high temperature TCA is performed on a series of 500 nm Ge buffer layers grown on Si (001), with the upper limit ranging from 900 to 950 °C. The structural properties of the Ge thin films are investigated, indicating that an optimized TCA profile occurs with the upper annealing temperature just below the melting point of Ge. Higher annealing temperature above the melting temperature of Ge results in homogeneous alloying of Ge and Si, induced by enhanced Si diffusion into Ge. This process produces a Ge0.75Si0.25 layer with a threading dislocation density of 3.5 × 108 cm-2 and a surface roughness of 3 nm. These findings inspire a novel approach for creating Ge-rich GeSi layers on Si, which potentially benefits the Ge/GeSi/Si (001) heterostructures and their applications in advanced Si-based semiconductor devices.
- 1 November 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (11)
Open AccessGe-rich homogenous GeSi alloying induced by Si–Ge interdiffusion under high temperature thermal cyclic annealing
Thermal cyclic annealing (TCA) is recognized as the key process in improving Ge film quality during epitaxial growth on Si substrates. In Ge-on-Si systems, annealing temperatures rarely exceed 900 °C due to the limitation of the Ge melting point (938 °C). In this study, ultra-high temperature TCA is performed on a series of 500 nm Ge buffer layers grown on Si (001), with the upper limit ranging from 900 to 950 °C. The structural properties of the Ge thin films are investigated, indicating that an optimized TCA profile occurs with the upper annealing temperature just below the melting point of Ge. Higher annealing temperature above the melting temperature of Ge results in homogeneous alloying of Ge and Si, induced by enhanced Si diffusion into Ge. This process produces a Ge0.75Si0.25 layer with a threading dislocation density of 3.5 × 108 cm-2 and a surface roughness of 3 nm. These findings inspire a novel approach for creating Ge-rich GeSi layers on Si, which potentially benefits the Ge/GeSi/Si (001) heterostructures and their applications in advanced Si-based semiconductor devices.
- Open Access
- 27 October 2025
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 40 (10) , 105013
C-band InAs/InP quantum dots: alternative growth versus indium-flush for self-assembled growth
1550 nm InAs/InP quantum dot (QD) lasers are critical for C-band optical communication. To realise narrow photo-luminescence linewidth emission in this wavelength range, the indium flush (IF) technique for self-assembled QDs and the alternative growth (AG) technique have been developed, enabling wavelength tuning and control of dot uniformity. This work investigates the stacking effect on nanostructures grown by these two methods by comparing five-stacked AG and IF nanostructures with identical spacer thickness. Structural and optical characterisations were performed using scanning transmission electron microscopy, atomic force microscopy, and photoluminescence measurements. The IF approach produces truncated, height-controlled QDs with reduced strain accumulation across stacked layers. In contrast, AG samples display quantum well-like morphology with sharp interfaces and no observable dislocations, but fail to consistently produce distinct QD nanostructures. These results suggest that IF provides a more reliable optimisation strategy for achieving C-band QDs within the framework of self-assembled growth, whereas AG requires further optimisation for use in InP-based systems.
- 27 October 2025
- Published by IOP Publishing in Semiconductor Science and Technology
- Vol. 40 (10) , 105013
Open AccessC-band InAs/InP quantum dots: alternative growth versus indium-flush for self-assembled growth
1550 nm InAs/InP quantum dot (QD) lasers are critical for C-band optical communication. To realise narrow photo-luminescence linewidth emission in this wavelength range, the indium flush (IF) technique for self-assembled QDs and the alternative growth (AG) technique have been developed, enabling wavelength tuning and control of dot uniformity. This work investigates the stacking effect on nanostructures grown by these two methods by comparing five-stacked AG and IF nanostructures with identical spacer thickness. Structural and optical characterisations were performed using scanning transmission electron microscopy, atomic force microscopy, and photoluminescence measurements. The IF approach produces truncated, height-controlled QDs with reduced strain accumulation across stacked layers. In contrast, AG samples display quantum well-like morphology with sharp interfaces and no observable dislocations, but fail to consistently produce distinct QD nanostructures. These results suggest that IF provides a more reliable optimisation strategy for achieving C-band QDs within the framework of self-assembled growth, whereas AG requires further optimisation for use in InP-based systems.
- Open Access
- 1 October 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (10)
Optical gain in O-band active regions with multiple dot-in-well layers
The optimum number of layers in InAs-based quantum dot-in-well active regions is investigated by means of sophisticated measurements of structures containing 8, 12, and 14 dot-in-well layers. Measurements of optical gain vs a parameter proportional to the carrier density indicate that additional layers do provide a proportional increase in the available gain at a given carrier density. This indicates that unequal optical overlap and unequal electrical pumping of the different layers are not significant effects. It is suggested that performance better than that of the typically used seven or eight layers may occur for samples with a higher layer number with reduced levels of p-modulation doping to minimize internal optical mode loss and non-radiative recombination.
- 1 October 2025
- Published by AIP Publishing in APL Photonics
- Vol. 10 (10)
Open AccessOptical gain in O-band active regions with multiple dot-in-well layers
The optimum number of layers in InAs-based quantum dot-in-well active regions is investigated by means of sophisticated measurements of structures containing 8, 12, and 14 dot-in-well layers. Measurements of optical gain vs a parameter proportional to the carrier density indicate that additional layers do provide a proportional increase in the available gain at a given carrier density. This indicates that unequal optical overlap and unequal electrical pumping of the different layers are not significant effects. It is suggested that performance better than that of the typically used seven or eight layers may occur for samples with a higher layer number with reduced levels of p-modulation doping to minimize internal optical mode loss and non-radiative recombination.
- Open Access
- 1 April 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (4)
Antiphase boundary-free III–V materials epitaxially grown on on-axis silicon (001) substrates by ultra-thin silicon buffer
The direct epitaxy of III–V materials on CMOS-compatible on-axis Si (001) is vital for scalable, cost-effective optoelectronic devices. However, material dissimilarities introduce crystal defects, such as antiphase boundaries (APBs) and threading dislocations (TDs), impairing performance. This study refines Si surface step stability modeling by incorporating temperature-dependent effects, elucidating single atomic step stability under high-temperature III–V growth conditions. We achieve APB-free III–V growth on Si (001) through (1) a 10 monolayer thin Si buffer layer enabling single atomic steps and (2) direct GaAs epitaxy on Ar plasma-treated Si. We identify wave-shaped Sb edge steps as key to APB self-annihilation and demonstrate that an ultra-thin Si buffer effectively suppresses APBs while minimizing thermal strain. In addition, we evaluate Ar plasma treatment, showing that it enables APB-free GaAs growth, with a Si buffer further enhancing step periodicity and reducing TD density. These insights optimize III–V/Si integration, advancing CMOS-compatible optoelectronic technologies.
- 1 April 2025
- Published by AIP Publishing in APL Materials
- Vol. 13 (4)
Open AccessAntiphase boundary-free III–V materials epitaxially grown on on-axis silicon (001) substrates by ultra-thin silicon buffer
The direct epitaxy of III–V materials on CMOS-compatible on-axis Si (001) is vital for scalable, cost-effective optoelectronic devices. However, material dissimilarities introduce crystal defects, such as antiphase boundaries (APBs) and threading dislocations (TDs), impairing performance. This study refines Si surface step stability modeling by incorporating temperature-dependent effects, elucidating single atomic step stability under high-temperature III–V growth conditions. We achieve APB-free III–V growth on Si (001) through (1) a 10 monolayer thin Si buffer layer enabling single atomic steps and (2) direct GaAs epitaxy on Ar plasma-treated Si. We identify wave-shaped Sb edge steps as key to APB self-annihilation and demonstrate that an ultra-thin Si buffer effectively suppresses APBs while minimizing thermal strain. In addition, we evaluate Ar plasma treatment, showing that it enables APB-free GaAs growth, with a Si buffer further enhancing step periodicity and reducing TD density. These insights optimize III–V/Si integration, advancing CMOS-compatible optoelectronic technologies.
- Open Access
- 1 December 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (12)
Indium-flush technique for C-band InAs/InP quantum dots
High-quality InAs/InP quantum dots (QDs) emitting at 1550 nm are indispensable to realize high-performance telecom C-band lasers. In general, a longer emission (>1550 nm) with a broad spectral character has been obtained with InAs/InP QDs. Here, we proposed the use of the indium-flush (IF) method to shorten the emission and improve the optical properties of InAs/InP QDs. By exploiting IF, the full-width at half-maximum of the room-temperature QD photoluminescence spectra is narrowed from 89.2 to 47.9 meV, with a blue shift of 300 nm (from 1824 to 1522 nm). The scanning transmission electron microscopy and electron energy loss spectroscopy results reveal the atomic-level mechanism of the IF method, which uniformly modify the height of InAs/InP QDs in a controlled manner and form distinct Al-rich and In-rich regions. Finally, InAs/InP (001) QD lasers with the IF method have been demonstrated with a low threshold current density per QD layer of 106 A/cm2. We demonstrated both in terms of mechanism model and device performance that the IF method could serve as a robust strategy for the growth of high-performance C-band InAs/InP QD lasers via molecular beam epitaxy.
- 1 December 2024
- Published by AIP Publishing in APL Materials
- Vol. 12 (12)
Open AccessIndium-flush technique for C-band InAs/InP quantum dots
High-quality InAs/InP quantum dots (QDs) emitting at 1550 nm are indispensable to realize high-performance telecom C-band lasers. In general, a longer emission (>1550 nm) with a broad spectral character has been obtained with InAs/InP QDs. Here, we proposed the use of the indium-flush (IF) method to shorten the emission and improve the optical properties of InAs/InP QDs. By exploiting IF, the full-width at half-maximum of the room-temperature QD photoluminescence spectra is narrowed from 89.2 to 47.9 meV, with a blue shift of 300 nm (from 1824 to 1522 nm). The scanning transmission electron microscopy and electron energy loss spectroscopy results reveal the atomic-level mechanism of the IF method, which uniformly modify the height of InAs/InP QDs in a controlled manner and form distinct Al-rich and In-rich regions. Finally, InAs/InP (001) QD lasers with the IF method have been demonstrated with a low threshold current density per QD layer of 106 A/cm2. We demonstrated both in terms of mechanism model and device performance that the IF method could serve as a robust strategy for the growth of high-performance C-band InAs/InP QD lasers via molecular beam epitaxy.
- 16 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
$1.3-\mu \mathrm{m}$ InAs Quantum Dot Lasers with P-type modulation and direct N-type co-doping
O-band quantum dot lasers with co-doping reduce threshold current density relative to the undoped case, for 1mm long uncoated lasers from 245Acm −2 to 132Acm −2 at 27°C and 731Acm −2 to 312Acm −2 at 97°C. Improvements are also significant compared to lasers employing any one doping strategy.
- 16 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
$1.3-\mu \mathrm{m}$ InAs Quantum Dot Lasers with P-type modulation and direct N-type co-doping
O-band quantum dot lasers with co-doping reduce threshold current density relative to the undoped case, for 1mm long uncoated lasers from 245Acm −2 to 132Acm −2 at 27°C and 731Acm −2 to 312Acm −2 at 97°C. Improvements are also significant compared to lasers employing any one doping strategy.