Maki Maeda
Research Subjects
Maki Maeda has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Quang Le
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
4 shared publications - Xiaoyong Liu
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
4 shared publications Brian York
Western Digital 3 , San Jose, California 95119
3 shared publications- Cherngye Hwang
Western Digital Inc. 2 , Great Oaks site, San Jose, California 95119
3 shared publications Hisashi Takano
Western Digital Inc. 3 , Fujisawa site, Kanagawa 252-0811
3 shared publications- Pham Nam Hai
Department of Electrical and Electronic Engineering, Institute of Science Tokyo, Tokyo 152-8552, Japan
3 shared publications
Latest Publications
- 11 May 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (18)
Enhanced spin–orbit torque efficiency via interface engineering in BiSb/X/CoFeB (X = Ge, NiAl, NiFeGe) topological heterostructures
Interlayer engineering is crucial for achieving efficient spin–orbit torque (SOT) generation in topological insulator (TI)/ferromagnet-based heterostructures. In this work, we investigated the impact of semiconducting and intermetallic interlayers, i.e., Ge, NiAl, and NiFeGe on SOT efficiency in topological BiSb/CoFeB heterostructures. Through comprehensive structural and transport analyses, we demonstrate that the Ge interlayer significantly enhances the performance. The insertion of a 1 nm-thick Ge layer significantly improves the crystallinity and orientation of BiSb, suppresses interfacial interdiffusion, and achieves a very low magnetic damping constant (αeff ∼ 0.006). The optimized BiSb/Ge/CoFeB structure exhibits an enhanced SOT efficiency of ∼50%, surpassing the performance of heterostructures without an interlayer, as well as those with NiAl or NiFeGe interlayers, which suffer from higher damping or reduced efficiency. Furthermore, we revealed that Ge thickness critically influences interfacial transparency, with excessive thickness degrading SOT efficiency. These findings establish Ge as an optimum interlayer material and indicate the importance of precise interface engineering to maximize charge-spin conversion in TI-based spintronic devices, paving the way for next-generation energy-efficient technologies.
- 11 May 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (18)
Enhanced spin–orbit torque efficiency via interface engineering in BiSb/X/CoFeB (X = Ge, NiAl, NiFeGe) topological heterostructures
Interlayer engineering is crucial for achieving efficient spin–orbit torque (SOT) generation in topological insulator (TI)/ferromagnet-based heterostructures. In this work, we investigated the impact of semiconducting and intermetallic interlayers, i.e., Ge, NiAl, and NiFeGe on SOT efficiency in topological BiSb/CoFeB heterostructures. Through comprehensive structural and transport analyses, we demonstrate that the Ge interlayer significantly enhances the performance. The insertion of a 1 nm-thick Ge layer significantly improves the crystallinity and orientation of BiSb, suppresses interfacial interdiffusion, and achieves a very low magnetic damping constant (αeff ∼ 0.006). The optimized BiSb/Ge/CoFeB structure exhibits an enhanced SOT efficiency of ∼50%, surpassing the performance of heterostructures without an interlayer, as well as those with NiAl or NiFeGe interlayers, which suffer from higher damping or reduced efficiency. Furthermore, we revealed that Ge thickness critically influences interfacial transparency, with excessive thickness degrading SOT efficiency. These findings establish Ge as an optimum interlayer material and indicate the importance of precise interface engineering to maximize charge-spin conversion in TI-based spintronic devices, paving the way for next-generation energy-efficient technologies.
- 8 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (23)
Giant perpendicular magnetic anisotropy in Mo/Boron-rich CoFeB/MgAl2O4 structure
Perpendicular magnetic tunnel junctions (p-MTJs) with perpendicular magnetic anisotropy (PMA) are key devices for scaling magnetoresistance random access memories down to ∼10 nm. However, the magnetic anisotropy field Hk of the intensively studied CoFeB/MgO is still about 4–6 kOe for bottom CoFeB, and the corresponding magnetic anisotropy energy coefficient Keff is about 3 × 106–5 × 106 erg cm−3. In this study, we aim to realize a giant PMA in Mo (2 nm)/Co19Fe56B25 (tCoFeB)/MgAl2O4 (4 nm)/Ta (1 nm) stack. By using the Boron-rich Co19Fe56B25 layer in combination with the Boron-blocking Mo underlayer and the spinel MgAl2O4 oxide layer, we can realize giant PMA in CoFeB with Hk as high as 17.5–19.5 kOe and Keff as high as 6.9 × 106–9.4 × 106 erg cm−3. Auger electron spectroscopy depth profiles reveal that the good balance between the Boron-blocking Mo layer and the Boron-sink MgAl2O4 layer results in about 20% of the original Boron remaining in CoFeB, leading to a small magnetization and giant PMA. Our results pave the way for further scaling of MTJs and improved resistance against thermal and external magnetic field disturbance.
- 8 December 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (23)
Giant perpendicular magnetic anisotropy in Mo/Boron-rich CoFeB/MgAl2O4 structure
Perpendicular magnetic tunnel junctions (p-MTJs) with perpendicular magnetic anisotropy (PMA) are key devices for scaling magnetoresistance random access memories down to ∼10 nm. However, the magnetic anisotropy field Hk of the intensively studied CoFeB/MgO is still about 4–6 kOe for bottom CoFeB, and the corresponding magnetic anisotropy energy coefficient Keff is about 3 × 106–5 × 106 erg cm−3. In this study, we aim to realize a giant PMA in Mo (2 nm)/Co19Fe56B25 (tCoFeB)/MgAl2O4 (4 nm)/Ta (1 nm) stack. By using the Boron-rich Co19Fe56B25 layer in combination with the Boron-blocking Mo underlayer and the spinel MgAl2O4 oxide layer, we can realize giant PMA in CoFeB with Hk as high as 17.5–19.5 kOe and Keff as high as 6.9 × 106–9.4 × 106 erg cm−3. Auger electron spectroscopy depth profiles reveal that the good balance between the Boron-blocking Mo layer and the Boron-sink MgAl2O4 layer results in about 20% of the original Boron remaining in CoFeB, leading to a small magnetization and giant PMA. Our results pave the way for further scaling of MTJs and improved resistance against thermal and external magnetic field disturbance.
- Open Access
- 25 March 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (12)
Effects of metal, oxide, and hybrid metal-oxide interlayers on spin–orbit torque in BiSb topological insulator and magnetic interfaces
The charge-to-spin conversion efficiency at the interface between a topological insulator and a ferromagnetic (FM) layer can be enhanced by inserting an interlayer (ITL). However, the mechanism of this enhancement is unclear. In this work, we systematically investigate the ITL effects by introducing various metal, oxide, and hybrid metal/oxide ITL between a BiSb topological insulator and a CoFe ferromagnetic layer. Our findings revealed that using a metallic NiFeGe or insulating MgO ITL resulted in similarly high efficiencies, with the highest efficiency achieved when employing hybrid NiFeGe/MgO ITL. However, efficiency decreased when NiFeGe was combined with MgTiO with increasing TiO composition. Such behaviors can be qualitatively understood by considering the ITL intrinsic effect of enhancing the intrinsic spin Hall angle of BiSb via preventing Sb diffusion from BiSb and migration of the FM and the extrinsic effect where the ITL spin transparency is determined by the spin tunneling/diffusion across the ITL and the spin-flip/spin-transfer at the ITL/FM interface. This study provides valuable insights and a framework for understanding and optimizing interlayer materials for ultralow power spin–orbit torque applications.
- 25 March 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 137 (12)
Open AccessEffects of metal, oxide, and hybrid metal-oxide interlayers on spin–orbit torque in BiSb topological insulator and magnetic interfaces
The charge-to-spin conversion efficiency at the interface between a topological insulator and a ferromagnetic (FM) layer can be enhanced by inserting an interlayer (ITL). However, the mechanism of this enhancement is unclear. In this work, we systematically investigate the ITL effects by introducing various metal, oxide, and hybrid metal/oxide ITL between a BiSb topological insulator and a CoFe ferromagnetic layer. Our findings revealed that using a metallic NiFeGe or insulating MgO ITL resulted in similarly high efficiencies, with the highest efficiency achieved when employing hybrid NiFeGe/MgO ITL. However, efficiency decreased when NiFeGe was combined with MgTiO with increasing TiO composition. Such behaviors can be qualitatively understood by considering the ITL intrinsic effect of enhancing the intrinsic spin Hall angle of BiSb via preventing Sb diffusion from BiSb and migration of the FM and the extrinsic effect where the ITL spin transparency is determined by the spin tunneling/diffusion across the ITL and the spin-flip/spin-transfer at the ITL/FM interface. This study provides valuable insights and a framework for understanding and optimizing interlayer materials for ultralow power spin–orbit torque applications.
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Spin Hall magnetic field sensing device using topological insulator
The “direct” spin Hall (DSH) effect has been intensively studied to manipulate the magnetic state in spin–orbit torque magnetic random access memory. Meanwhile, its reciprocal phenomenon, known as the “inverse” spin Hall (ISH) effect, has been studied as a method to read the magnetic state of a magnetic element in a magnetic read head sensor and magnetoelectric spin–orbit logic device. This work studies a magnetic field sensing device structure in which the DSH effect is used for reading the magnetic state in a ferromagnetic (FM)/topological insulator (TI) heterostructure. We found that while the output of our DSH sensing device is consistent with that based on the ISH effect, the spin Hall angle calculated from its magnitude is colossal (θSH ∼ 164) and significantly higher than that (θSH ∼ 3.5) obtained from the second harmonic measurement. Our findings show that the giant DSH and ISH effects in TI-based heterostructures are useful for realizing next-generation magnetic read head device and have important implications for engineering topological quantum materials with high spin Hall performance.
- 9 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (24)
Spin Hall magnetic field sensing device using topological insulator
The “direct” spin Hall (DSH) effect has been intensively studied to manipulate the magnetic state in spin–orbit torque magnetic random access memory. Meanwhile, its reciprocal phenomenon, known as the “inverse” spin Hall (ISH) effect, has been studied as a method to read the magnetic state of a magnetic element in a magnetic read head sensor and magnetoelectric spin–orbit logic device. This work studies a magnetic field sensing device structure in which the DSH effect is used for reading the magnetic state in a ferromagnetic (FM)/topological insulator (TI) heterostructure. We found that while the output of our DSH sensing device is consistent with that based on the ISH effect, the spin Hall angle calculated from its magnitude is colossal (θSH ∼ 164) and significantly higher than that (θSH ∼ 3.5) obtained from the second harmonic measurement. Our findings show that the giant DSH and ISH effects in TI-based heterostructures are useful for realizing next-generation magnetic read head device and have important implications for engineering topological quantum materials with high spin Hall performance.