Jun Wu
Research Subjects
Jun Wu has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Wenjun Zhou
China Jiliang University, Hangzhou, China
3 shared publications Changyu Shen
College of Optical and Electronic Technology
2 shared publications- Changyu Shen
College of Optical and Electronic Technology, China Jiliang University , Hangzhou, Zhejiang 310018
2 shared publications Jie Dong
College of Optical and Electronic Technology
2 shared publications- Jun Zhou
China Jiliang University
2 shared publications - Wenbo Sui
College of Optical and Electronic Technology, China Jiliang University, Hangzhou, China
2 shared publications
Latest Publications
- 11 February 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (8) , 6248-6261
MT-I/AuNP-Based Fiber-Optic SPR Biosensor for Ultralow Limit Triglyceride Detection and On-Site Hydrolysis
Triglyceride (TG) is a critical biomarker in lipid metabolism and its trace-level detection and hydrolytic processes are important for human health management. Here, we present a novel approach involving the functionalization of a tilted fiber Bragg grating (TFBG) with Au-MT-I/AuNPs/lipase for plasmonic fiber-optic spectral comb technology, enabling rapid response and ultrasensitive TG detection as well as on-site hydrolysis. Through the utilization of Au-S bond self-assembly, the thiol groups derived from cysteine residues within metallothionein-I (MT-I) are utilized to create a functional modification layer on the gold-coated TFBG surface. Subsequently, the carboxyl groups of MT-I are activated using carbodiimide/N-hydroxysuccinimide (EDC/NHS) chemistry and covalently linked to the amine groups of gold nanoparticles-NH2 (AuNPs-NH2) via amide bond formation. Finally, the carboxyl groups of lipases are conjugated to the amine groups of AuNPs-NH2. Leveraging the molecular bridging capability and high specific surface area of AuNPs-NH2, both MT-I and lipase are covalently immobilized onto the nanoparticle surface, creating a "gold film-MT-I/AuNPs/lipase" composite sensing interface. The experimental results indicate that the proposed sensor exhibits a sensitivity of 0.346 dB/lg(mM) and a low limit of detection (LOD) of 4.192 μM, surpassing previous reports by over 4 orders of magnitude. In addition, the lipase in the sensing membrane can catalyze the hydrolysis of triglyceride into glycerol and free fatty acids by gradually breaking the ester bonds to achieve complete hydrolysis. The "protein-nanoparticle-enzyme" synergistic sensing system established by this sensor offers valuable insights and serves as a reference for the design and development of dual-functional biosensors capable of monitoring enzymatic reactions and biosensing detection.
- 11 February 2026
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 98 (8) , 6248-6261
MT-I/AuNP-Based Fiber-Optic SPR Biosensor for Ultralow Limit Triglyceride Detection and On-Site Hydrolysis
Triglyceride (TG) is a critical biomarker in lipid metabolism and its trace-level detection and hydrolytic processes are important for human health management. Here, we present a novel approach involving the functionalization of a tilted fiber Bragg grating (TFBG) with Au-MT-I/AuNPs/lipase for plasmonic fiber-optic spectral comb technology, enabling rapid response and ultrasensitive TG detection as well as on-site hydrolysis. Through the utilization of Au-S bond self-assembly, the thiol groups derived from cysteine residues within metallothionein-I (MT-I) are utilized to create a functional modification layer on the gold-coated TFBG surface. Subsequently, the carboxyl groups of MT-I are activated using carbodiimide/N-hydroxysuccinimide (EDC/NHS) chemistry and covalently linked to the amine groups of gold nanoparticles-NH2 (AuNPs-NH2) via amide bond formation. Finally, the carboxyl groups of lipases are conjugated to the amine groups of AuNPs-NH2. Leveraging the molecular bridging capability and high specific surface area of AuNPs-NH2, both MT-I and lipase are covalently immobilized onto the nanoparticle surface, creating a "gold film-MT-I/AuNPs/lipase" composite sensing interface. The experimental results indicate that the proposed sensor exhibits a sensitivity of 0.346 dB/lg(mM) and a low limit of detection (LOD) of 4.192 μM, surpassing previous reports by over 4 orders of magnitude. In addition, the lipase in the sensing membrane can catalyze the hydrolysis of triglyceride into glycerol and free fatty acids by gradually breaking the ester bonds to achieve complete hydrolysis. The "protein-nanoparticle-enzyme" synergistic sensing system established by this sensor offers valuable insights and serves as a reference for the design and development of dual-functional biosensors capable of monitoring enzymatic reactions and biosensing detection.
- 2 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (23)
Ultralow limit human IgG detection with 2H-MoS2/L-cysteine based plasmonic fiber-optic spectral combs
The detection of human immunoglobulin G (human IgG) provides crucial evidence in diagnosis of infectious diseases and monitoring of therapeutic effects. Here, we propose a plasmonic fiber-optical surface plasmon resonance (SPR) based sensor to realize the ultralow limit human IgG detection. The proposed sensor is fabricated by attaching a mixture of 2H-MoS2 nanosheets with L-cysteine on a gold-coated tilted fiber Bragg grating. The 2H-MoS2 possesses a large specific surface area, where the L-cysteine can enhance the stability of antibody modification. The composite membrane of 2H-MoS2 and L-cysteine can adsorb more probe rabbit anti-human IgG, which can improve sensitivity of the proposed sensor. The experimental results show that the proposed sensor exhibits a response time of approximately 220 s and a sensitivity of 0.11 dB/(ng/ml). The limit of detection of 0.87 ng/ml of the proposed sensor is one order of magnitude lower than those of other fiber-optic SPR human IgG sensors.
- 2 December 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (23)
Ultralow limit human IgG detection with 2H-MoS2/L-cysteine based plasmonic fiber-optic spectral combs
The detection of human immunoglobulin G (human IgG) provides crucial evidence in diagnosis of infectious diseases and monitoring of therapeutic effects. Here, we propose a plasmonic fiber-optical surface plasmon resonance (SPR) based sensor to realize the ultralow limit human IgG detection. The proposed sensor is fabricated by attaching a mixture of 2H-MoS2 nanosheets with L-cysteine on a gold-coated tilted fiber Bragg grating. The 2H-MoS2 possesses a large specific surface area, where the L-cysteine can enhance the stability of antibody modification. The composite membrane of 2H-MoS2 and L-cysteine can adsorb more probe rabbit anti-human IgG, which can improve sensitivity of the proposed sensor. The experimental results show that the proposed sensor exhibits a response time of approximately 220 s and a sensitivity of 0.11 dB/(ng/ml). The limit of detection of 0.87 ng/ml of the proposed sensor is one order of magnitude lower than those of other fiber-optic SPR human IgG sensors.
- 23 October 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (21) , 6157-6160
Respiratory monitoring via a nanoporous film-coated tilted fiber Bragg grating humidity sensor
A humidity sensor for respiratory monitoring based on a tilted fiber Bragg grating (TFBG) functionalized with a nanoporous coating consisting of titanium carbide (Ti2C) and fullerene (C60) is proposed. By incorporating the C60 into Ti2C, a nanocomposite film with abundant three-dimensional porousness is coated on the TFBG surface. The nanocomposite film with strong hygroscopicity and desorption properties is highly sensitive to environmental humidity variations, where the induced refractive index changes of the coating result in the spectral responses of TFBG multi-resonances. Experimental results show that the sensitivity of the sensor is as high as 0.055 dB/%RH in the relative humidity range of 10–90%RH with the response and recovery time of 0.59 and 0.91 s, respectively. Furthermore, the humidity sensor was successfully used to perform in vivo respiratory monitoring of the humans.
- 23 October 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (21) , 6157-6160
Respiratory monitoring via a nanoporous film-coated tilted fiber Bragg grating humidity sensor
A humidity sensor for respiratory monitoring based on a tilted fiber Bragg grating (TFBG) functionalized with a nanoporous coating consisting of titanium carbide (Ti2C) and fullerene (C60) is proposed. By incorporating the C60 into Ti2C, a nanocomposite film with abundant three-dimensional porousness is coated on the TFBG surface. The nanocomposite film with strong hygroscopicity and desorption properties is highly sensitive to environmental humidity variations, where the induced refractive index changes of the coating result in the spectral responses of TFBG multi-resonances. Experimental results show that the sensitivity of the sensor is as high as 0.055 dB/%RH in the relative humidity range of 10–90%RH with the response and recovery time of 0.59 and 0.91 s, respectively. Furthermore, the humidity sensor was successfully used to perform in vivo respiratory monitoring of the humans.
- 31 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Trace Detection of Cadmium ion Based on Glutathione-Functionalized TFBG-SPR Sensor
This paper presents a novel cadmium ion sensor that utilizes a tilted fiber Bragg grating functionalized by glutathione. Gold nanoparticles are used to amplify localized refractive index changes. The limit of detection is 0.07 nM.
- 31 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Trace Detection of Cadmium ion Based on Glutathione-Functionalized TFBG-SPR Sensor
This paper presents a novel cadmium ion sensor that utilizes a tilted fiber Bragg grating functionalized by glutathione. Gold nanoparticles are used to amplify localized refractive index changes. The limit of detection is 0.07 nM.
- 23 March 2017
- Published by Taylor & Francis in Sustainable and Resilient Infrastructure
- Vol. 2 (3) , 136-152
Framework of microscopic traffic flow simulation on highway infrastructure system under hazardous driving conditions
A typical highway system includes infrastructures, such as roadways and bridges, and moving traffic flow. The resilience of a highway system subjected to various hazards depends on not only post-hazard integrity of infrastructure, but also safe and smooth movements of vehicles through the system during and immediately following hazards. To rationally predict the post-hazard performance of a highway system including both structural integrity and traffic functionality, an advanced traffic flow simulation tool of a highway system under hazardous conditions is needed. A new cellular automaton (CA)-based traffic flow simulation framework is developed for the traffic flow simulation on a typical highway system including a long-span bridge under hazardous conditions by incorporating limited deceleration rate, anticipation effect, realistic vehicle properties, and different driving behaviors. A demonstrative study is carried out with the proposed framework to investigate the traffic flow characteristics and potential impacts on both infrastructure performance and vehicle safety.
- 23 March 2017
- Published by Taylor & Francis in Sustainable and Resilient Infrastructure
- Vol. 2 (3) , 136-152
Framework of microscopic traffic flow simulation on highway infrastructure system under hazardous driving conditions
A typical highway system includes infrastructures, such as roadways and bridges, and moving traffic flow. The resilience of a highway system subjected to various hazards depends on not only post-hazard integrity of infrastructure, but also safe and smooth movements of vehicles through the system during and immediately following hazards. To rationally predict the post-hazard performance of a highway system including both structural integrity and traffic functionality, an advanced traffic flow simulation tool of a highway system under hazardous conditions is needed. A new cellular automaton (CA)-based traffic flow simulation framework is developed for the traffic flow simulation on a typical highway system including a long-span bridge under hazardous conditions by incorporating limited deceleration rate, anticipation effect, realistic vehicle properties, and different driving behaviors. A demonstrative study is carried out with the proposed framework to investigate the traffic flow characteristics and potential impacts on both infrastructure performance and vehicle safety.