Rotan Kumar Saha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rotan Kumar Saha has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Narayan Chandra Ray
3 shared publications- Nazmul Hasan3 shared publications
- Safayet Hossain
Department of Industrial and Production Engineering Dhaka University of Engineering & Technology -1707 Gazipur Gazipur Bangladesh
3 shared publications Tareque Hasan
3 shared publications- Tuhin Hosen
Department of Industrial and Production Engineering Dhaka University of Engineering & Technology -1707 Gazipur Gazipur Bangladesh
3 shared publications Easin Mollah
2 shared publications
Latest Publications
- Open Access
- 1 March 2026
- Published by KEAI Publishing in International Journal of Lightweight Materials and Manufacture
- Vol. 9 (2) , 165-181
Investigating the impact of layer thickness and print orientation on strength and structural integrity of SLA 3D printed composites
- 1 March 2026
- Published by KEAI Publishing in International Journal of Lightweight Materials and Manufacture
- Vol. 9 (2) , 165-181
Open AccessInvestigating the impact of layer thickness and print orientation on strength and structural integrity of SLA 3D printed composites
- Open Access
- 5 December 2025
- Published by Elsevier in Results in Materials
- Vol. 28
Mechanical and physical characterization of SLA 3D-Printed water-washable composites for high-precision jewelry applications
- 5 December 2025
- Published by Elsevier in Results in Materials
- Vol. 28
Open AccessMechanical and physical characterization of SLA 3D-Printed water-washable composites for high-precision jewelry applications
- Open Access
- 1 June 2025
- Published by Elsevier in Hybrid Advances
- Vol. 11
Enhancing mechanical and surface properties of 3D-Printed Kevlar-reinforced ABS/PLA composites through FDM process
- 1 June 2025
- Published by Elsevier in Hybrid Advances
- Vol. 11
Open AccessEnhancing mechanical and surface properties of 3D-Printed Kevlar-reinforced ABS/PLA composites through FDM process
- Open Access
- 21 December 2024
- Published by IEOM Society International
Analyzing Ergonomic Factors Influencing Productivity in Bangladeshi Garment Industry Using Fuzzy ANP Method
This research explores the impact of ergonomic factors on productivity in the Bangladeshi garment industry, a vital sector for the nation's economy, but characterized by challenging working conditions. The study highlights how ergonomic practices aimed at improving worker health, comfort, and efficiency can enhance productivity while reducing health issues such as musculoskeletal disorders and fatigue. Despite growing awareness of ergonomics in developing countries, the application of these principles in the Bangladeshi garment sector remains limited due to constraints in cost-effective worker solutions. The study identifies critical ergonomic factors influencing productivity, categorizing them into personal variables, workplace environment, and health issues. The fuzzy analytical network process (ANP) is employed to prioritize these factors and pinpoint areas requiring urgent intervention, such as poorly maintained equipment. The reliabilty analysis with a Cronbach`s Alpha value of 0.913, confirms the high reliability of the findings. Results from the analytical hierarchy process show that the work environment (0.68 weight) has the most singnificant impact on productivity, followed by individul characteristics (0.24 weight) and health-related issues (0.08 weight). Sensitivity analysis reveals that the industrial environment (E3) is the most influential factor, with its impact increasing as its dimensions are gradually adjusted. The findings emphasize the importance of ergonomic improvements to boost productivity and enhance worker well-being, with broader implications for other sectors.
- 21 December 2024
- Published by IEOM Society International
Open AccessAnalyzing Ergonomic Factors Influencing Productivity in Bangladeshi Garment Industry Using Fuzzy ANP Method
This research explores the impact of ergonomic factors on productivity in the Bangladeshi garment industry, a vital sector for the nation's economy, but characterized by challenging working conditions. The study highlights how ergonomic practices aimed at improving worker health, comfort, and efficiency can enhance productivity while reducing health issues such as musculoskeletal disorders and fatigue. Despite growing awareness of ergonomics in developing countries, the application of these principles in the Bangladeshi garment sector remains limited due to constraints in cost-effective worker solutions. The study identifies critical ergonomic factors influencing productivity, categorizing them into personal variables, workplace environment, and health issues. The fuzzy analytical network process (ANP) is employed to prioritize these factors and pinpoint areas requiring urgent intervention, such as poorly maintained equipment. The reliabilty analysis with a Cronbach`s Alpha value of 0.913, confirms the high reliability of the findings. Results from the analytical hierarchy process show that the work environment (0.68 weight) has the most singnificant impact on productivity, followed by individul characteristics (0.24 weight) and health-related issues (0.08 weight). Sensitivity analysis reveals that the industrial environment (E3) is the most influential factor, with its impact increasing as its dimensions are gradually adjusted. The findings emphasize the importance of ergonomic improvements to boost productivity and enhance worker well-being, with broader implications for other sectors.
- Open Access
- 21 December 2024
- Published by IEOM Society International
Finite Element Simulation of Alloyed Steel (20MnCr5) in Extrusion Process Using Deform 3D Software
This study focuses on optimizing input process parameters for the extrusion of alloyed steel (20MnCr5) using finite element simulation via DEFORM-3D software and the Taguchi method. The selection of appropriate process parameters is critical to minimize extrusion force, particularly when different material sets are involved. The research examines key parameters such as billet material properties, workpiece geometry, die angle, coefficient of friction, logarithmic strain, ram speed, and die length. Through DEFORM 3D simulation, the minimum extrusion force is predicted, and optimal process parameters are identified using Taguchi analysis. The regression analysis identified optimal conditions with a coefficient of friction at 0.08, die angle at 20°, and ram velocity at 1.5 mm/s, resulting in an extrusion force of 556291KN. ANOVA results indicate that die angle is the most influential factor, contributing 43.45% to the variation in extrusion force. Using an L27 (3^3) orthogonal array, the experiments were analyzed via MINITAB software. The analysis of extrusion speed's effect on temperature revealed a maximum die temperature of 600°C and billet temperature of 1030°C at ram speeds between 1-2 mm/s. Additionally, the temperature-stress relationship indicated the highest stress value of 1000 MPa at 20°C with 0.7% strain, while the lowest stress of 90 MPa occurred at 1050°C with 0% strain. The findings demonstrate the significant impact of optimized parameters on reducing extrusion force, enhancing process efficiency.
- 21 December 2024
- Published by IEOM Society International
Open AccessFinite Element Simulation of Alloyed Steel (20MnCr5) in Extrusion Process Using Deform 3D Software
This study focuses on optimizing input process parameters for the extrusion of alloyed steel (20MnCr5) using finite element simulation via DEFORM-3D software and the Taguchi method. The selection of appropriate process parameters is critical to minimize extrusion force, particularly when different material sets are involved. The research examines key parameters such as billet material properties, workpiece geometry, die angle, coefficient of friction, logarithmic strain, ram speed, and die length. Through DEFORM 3D simulation, the minimum extrusion force is predicted, and optimal process parameters are identified using Taguchi analysis. The regression analysis identified optimal conditions with a coefficient of friction at 0.08, die angle at 20°, and ram velocity at 1.5 mm/s, resulting in an extrusion force of 556291KN. ANOVA results indicate that die angle is the most influential factor, contributing 43.45% to the variation in extrusion force. Using an L27 (3^3) orthogonal array, the experiments were analyzed via MINITAB software. The analysis of extrusion speed's effect on temperature revealed a maximum die temperature of 600°C and billet temperature of 1030°C at ram speeds between 1-2 mm/s. Additionally, the temperature-stress relationship indicated the highest stress value of 1000 MPa at 20°C with 0.7% strain, while the lowest stress of 90 MPa occurred at 1050°C with 0% strain. The findings demonstrate the significant impact of optimized parameters on reducing extrusion force, enhancing process efficiency.
- Open Access
- 21 December 2024
- Published by IEOM Society International
Optimization of Coating Thickness Parameters and Prediction of Optimal Range in the Cold Spray Process
This research investigates the optimization of electro-conductive coatings using the cold spray process, employing a Taguchi L18 experimental design. The study focuses on the influence of various process parameters on coating thickness, including substrate material, powder feeding arrangement, stagnation gas temperature, stagnation gas pressure, and standoff distance. Three levels of each parameter were tested: substrate materials (Aluminum alloy, Brass, and Ni alloy), powder feeding types (Gravity and Argon feeders), stagnation pressures (98, 104, and 108 psi), stagnation temperatures (360°C, 380°C, and 400°C), and standoff distances (2, 4.5, and 7 mm). The results indicate that the optimal coating thickness is achieved with an Argon powder feeder, Aluminum alloy substrate, stagnation pressure of 110 psi, stagnation temperature of 400°C, and a standoff distance of 4.5 mm. The typical coating thickness for the low-pressure cold spray process was found to be 1.63 mm, within the predicted confidence interval. Statistical analysis, including Analysis of Variance (ANOVA) and Signal-to-Noise (S/N) ratio, was performed to identify the significant factors influencing coating thickness. The percentage contribution of each process parameter was determined, revealing that the most influential factors, in decreasing order of importance, are standoff distance, stagnation gas temperature, substrate material, stagnation gas pressure, and powder feeding arrangement. These findings provide valuable insights into optimizing the cold spray process for high-quality electro-conductive coatings.
- 21 December 2024
- Published by IEOM Society International
Open AccessOptimization of Coating Thickness Parameters and Prediction of Optimal Range in the Cold Spray Process
This research investigates the optimization of electro-conductive coatings using the cold spray process, employing a Taguchi L18 experimental design. The study focuses on the influence of various process parameters on coating thickness, including substrate material, powder feeding arrangement, stagnation gas temperature, stagnation gas pressure, and standoff distance. Three levels of each parameter were tested: substrate materials (Aluminum alloy, Brass, and Ni alloy), powder feeding types (Gravity and Argon feeders), stagnation pressures (98, 104, and 108 psi), stagnation temperatures (360°C, 380°C, and 400°C), and standoff distances (2, 4.5, and 7 mm). The results indicate that the optimal coating thickness is achieved with an Argon powder feeder, Aluminum alloy substrate, stagnation pressure of 110 psi, stagnation temperature of 400°C, and a standoff distance of 4.5 mm. The typical coating thickness for the low-pressure cold spray process was found to be 1.63 mm, within the predicted confidence interval. Statistical analysis, including Analysis of Variance (ANOVA) and Signal-to-Noise (S/N) ratio, was performed to identify the significant factors influencing coating thickness. The percentage contribution of each process parameter was determined, revealing that the most influential factors, in decreasing order of importance, are standoff distance, stagnation gas temperature, substrate material, stagnation gas pressure, and powder feeding arrangement. These findings provide valuable insights into optimizing the cold spray process for high-quality electro-conductive coatings.
- RetractedOpen Access
RETRACTED: Optimization of cutting temperature and surface roughness in CNC turning of Ti-6Al-4V alloy using response surface methodology