HHHao Huang

Hao Huang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hao Huang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of Mechanical Anchorage Configuration on the Failure Behavior of Inclined Short Pile Foundation Joints

    by Jun Duan, Qiang Xie, Yiqing Zhang, Yuxin Ban, Xiang Fu, Ying Zhang, Binqi Yan, Futao Tao, Hao Huang

  • Open Access

    Discussion on AC Resistance and Temperature of ACSR Based on Finite Element Model Assistance

    by Jianbo Yu, Changqing Wu, Hao Huang, Dexin Xie, Feixiang Qin, Jian Jiang, Gaohui He

    In overhead wire transmission systems, the presence of AC resistance results in increased energy dissipation, adversely affecting the lines’ capacity to conduct current. This paper employs a finite element aluminum conductor steel-reinforced (ACSR) model, combined with electrical measurement techniques, to investigate AC resistance. By applying varying levels of AC current, the model is employed to determine the AC resistance which closely aligns with theoretical values estimated using the Morgan algorithm. The trends observed in the parameters are consistent, thereby validating the accuracy of the model. Following simulations and analyses regarding both AC resistance and temperature variations within the conductors—and incorporating empirical measurement results—it is demonstrated that, when environmental factors are not considered, any increase in the conductor temperature can be integrated into a revised model. This updated model is subsequently compared against test results obtained from an experimental platform; the findings confirm that the estimation errors remain within an acceptable range. Overall, this simulation model serves as a valuable reference for assessing AC losses in existing conductors, as well as contributing to reduced experimental costs while mitigating the associated risks and challenges. In summary, this simulation model serves as an essential reference for assessing AC losses in current conductors and aids in reducing experimental costs while addressing the associated risks and challenges.


  • Open Access

    Numerical Simulation of Uplift Behavior of a Rock-Socketed Pier Anchored by Inclined Anchors in Rock Masses

    by Yuan Peng, Qijun Shu, Huayu Zhang, Hao Huang, Yiqing Zhang, Zengzhen Qian

    The rock-socketed pier anchored by inclined anchors (RPIA) is a new type of foundation developed by combining a rock-socketed pier and inclined anchors. Current research on RPIA is relatively limited, and the impact of design parameters on its bearing performance remains unclear. To investigate the uplift-bearing performance of RPIA, a finite-element model that considers the nonlinear properties of materials and multidirectional interactions was developed and verified. Based on this model, numerical simulations were performed on twenty-five RPIA that were designed using the L25 orthogonal array proposed by the Taguchi method, and the uplift load–displacement curve for each RPIA was obtained. Based on the interpretation of the elastic limit, uplift resistance, initial stiffness, and the ductility index for each simulated RPIA, the sensitivity of each factor was examined by analyzing the signal-to-noise ratio and variance. The results indicated that rock strength and pier diameter were the main factors determining the uplift performance of the RPIAs, while the angle of inclined anchors is the most influential factor affecting the ductility of RPIA. The primary role of the inclined anchor is to reduce the extraction of the pier after failure of the side resistance between the pier and rock mass, thus significantly enhancing the ductility of the uplift-loaded RPIA. The addition of reinforcements around the connection joints of the pier and anchors may prevent concrete failure and to fully execute the role of inclined anchors.