Veronika Majherova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Veronika Majherova has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Louis F. J. Piper
University of Warwick
9 shared publications - Gerard Bree
University of Warwick
8 shared publications - Galo Jaime Páez Fajardo
University of Warwick
7 shared publications - Ashok Sreekumar Menon
WMG, University of Warwick
4 shared publications - Eleni Fiamegkou
University of Warwick
3 shared publications - Melanie Jayne Loveridge
University of Warwick
3 shared publications
Latest Publications
- Open Access
- 15 September 2025
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (2)
LiMn x Fe 1 − X PO 4 Anodefree Batteries: A Scalable, Low Cost, Energy Dense Lithium Cell Design
The anodefree (AF) configuration of lithium batteries represents a low‐cost, high energy density alternative to current generation chemistries, and coupling with Ni and Co‐free LiMn x Fe 1− x PO 4 (LMFP) cathodes further reinforces these advantages. In this work, this cell type in coin and pouch format is manufactured and evaluated, establishing key performance characteristics and optimized test protocols, while identifying outstanding challenges limiting cell lifetime. The AF LMFP coin cell provides a 35% stack‐level energy density advantage over a traditional full cell (with graphite anode) when using a 60:40 Mn:Fe LMFP variant, which improves to a 42% advantage when Mn content was increased to 80% (at the cost of more rapid capacity loss). Cycling over the potential range of 3.0–4.5 V maximizes cell lifetime, while the dominant degradation mechanism is identified as irreversible Li loss associated with a disadvantageous evolution in plated Li morphology. Finally, the AF battery manufacturing is scaled to large‐area pouch format to demonstrate commercial viability and compatibility with current industrial processes.
- 15 September 2025
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (2)
Open AccessLiMn x Fe 1 − X PO 4 Anodefree Batteries: A Scalable, Low Cost, Energy Dense Lithium Cell Design
The anodefree (AF) configuration of lithium batteries represents a low‐cost, high energy density alternative to current generation chemistries, and coupling with Ni and Co‐free LiMn x Fe 1− x PO 4 (LMFP) cathodes further reinforces these advantages. In this work, this cell type in coin and pouch format is manufactured and evaluated, establishing key performance characteristics and optimized test protocols, while identifying outstanding challenges limiting cell lifetime. The AF LMFP coin cell provides a 35% stack‐level energy density advantage over a traditional full cell (with graphite anode) when using a 60:40 Mn:Fe LMFP variant, which improves to a 42% advantage when Mn content was increased to 80% (at the cost of more rapid capacity loss). Cycling over the potential range of 3.0–4.5 V maximizes cell lifetime, while the dominant degradation mechanism is identified as irreversible Li loss associated with a disadvantageous evolution in plated Li morphology. Finally, the AF battery manufacturing is scaled to large‐area pouch format to demonstrate commercial viability and compatibility with current industrial processes.
- Open Access
- 1 September 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (9) , 090505
Revealing How Silicon Oxide Accelerates Calendar Ageing of Commercial 21700 Nickel-Rich Lithium-Ion Cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM 50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ∼80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect,” the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- 1 September 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (9) , 090505
Open AccessRevealing How Silicon Oxide Accelerates Calendar Ageing of Commercial 21700 Nickel-Rich Lithium-Ion Cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM 50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ∼80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect,” the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- Open Access
- 30 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Pilot-line LMFP anodefree pouch cells: a scalable, low cost, energy dense Lithium battery
The anodefree configuration of lithium batteries represents a low-cost, high energy density alternative to current generation chemistries, and coupling with Ni and Co-free LiMnxFe1-xPO4 (LMFP) cathodes further reinforces these advantages. In this work, we manufacture and evaluate this cell type in coin and pouch format, establishing key performance characteristics and optimised test protocols, while identifying outstanding challenges limiting cell lifetime. The anodefree LMFP coin cell provides a 35 % stack-level energy density advantage over a traditional full cell (with graphite anode) when using a 60:40 Mn:Fe LMFP variant, which improves to a 42 % advantage when Mn content was increased to 80 % (at the cost of more rapid capacity loss). Cycling over the potential range of 3.0 – 4.5 V maximises cell lifetime, while the dominant degradation mechanism is identified as irreversible Li loss associated with a disadvantageous evolution in plated Li morphology. Finally, anodefree battery manufacturing is scaled to large-area pouch format to demonstrate commercial viability and compatibility with current industrial processes.
- 30 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPilot-line LMFP anodefree pouch cells: a scalable, low cost, energy dense Lithium battery
The anodefree configuration of lithium batteries represents a low-cost, high energy density alternative to current generation chemistries, and coupling with Ni and Co-free LiMnxFe1-xPO4 (LMFP) cathodes further reinforces these advantages. In this work, we manufacture and evaluate this cell type in coin and pouch format, establishing key performance characteristics and optimised test protocols, while identifying outstanding challenges limiting cell lifetime. The anodefree LMFP coin cell provides a 35 % stack-level energy density advantage over a traditional full cell (with graphite anode) when using a 60:40 Mn:Fe LMFP variant, which improves to a 42 % advantage when Mn content was increased to 80 % (at the cost of more rapid capacity loss). Cycling over the potential range of 3.0 – 4.5 V maximises cell lifetime, while the dominant degradation mechanism is identified as irreversible Li loss associated with a disadvantageous evolution in plated Li morphology. Finally, anodefree battery manufacturing is scaled to large-area pouch format to demonstrate commercial viability and compatibility with current industrial processes.
- Open Access
- 27 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Revealing how silicon oxide accelerates calendar ageing of commercial 21700 nickel-rich lithium-ion cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ~80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect”, the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- 27 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRevealing how silicon oxide accelerates calendar ageing of commercial 21700 nickel-rich lithium-ion cells
This study investigates the calendar ageing behaviour of NMC811//SiOx-graphite 21700 cylindrical cells (LGM50), which were held at varying states of charge (SoC), for up to 70 weeks at 4 different temperatures. Throughout the ageing study, capacity and internal resistance were monitored, and significant capacity loss over time, with greater loss at high SoC and temperature, were observed. A combination of electrochemical testing and post-mortem characterisation techniques point to the anode, more specifically, the silicon-oxide particles, as the driver of capacity fade through unstable solid-electrolyte interface dynamics, leading to the gradual loss of lithium inventory. Despite the greatest capacity loss being at ~80% SoC and the apparent improvement in capacity retention at higher SoCs, i.e. the “spoon-shape effect”, the degradation is most pronounced at 100% SoC, driven by the instability of the silicon-oxide SEI. This is demonstrated by post-calendar ageing cycling of the cells, where those aged at 100% SoC degraded at a faster rate than 80% SoC.
- Open Access
- 1 February 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (2) , 020526
Fast-Charging Lithium-Ion Battery Protocols: LMFP Pouch Cells as a Rate Capability Case Study
The reduction of battery charge times is a key challenge in the wider adoption of electric vehicles (EVs), encompassing material, cell, and system design aspects. Rate capability testing, the charging and discharging of a cell at various C-rates, is the most common technique used to assess the performance of Li-ion batteries, and particularly new electrode materials/cell designs, at high cycling rates. Data generated from this technique is extremely sensitive to selected cell format, quality of assembly, and test protocols, and thus lack of standardisation prevents both robust conclusions and comparison between studies. Furthermore, the figures of merit of such studies are often ill-defined, out of step with commercial requirements and established only for non-relevant formats. Herein, we utilise LiMn0.6Fe0.4PO4\\Graphite (LMFP\\Gr) coin (half and full) and full pouch cells to demonstrate these sensitivities. Cell format, electrode coat weight/porosity, and the inclusion of a constant voltage step during charge, are shown to dramatically alter the capacity observed at high C-rate in otherwise identical cells, reinforcing the advantages of testing in real-world conditions and the need for consistency between test samples/studies. To resolve this, we propose a commercially meaningful and industrially relevant protocol to evaluate fast-charging capabilities of Li-ion batteries.
- 1 February 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (2) , 020526
Open AccessFast-Charging Lithium-Ion Battery Protocols: LMFP Pouch Cells as a Rate Capability Case Study
The reduction of battery charge times is a key challenge in the wider adoption of electric vehicles (EVs), encompassing material, cell, and system design aspects. Rate capability testing, the charging and discharging of a cell at various C-rates, is the most common technique used to assess the performance of Li-ion batteries, and particularly new electrode materials/cell designs, at high cycling rates. Data generated from this technique is extremely sensitive to selected cell format, quality of assembly, and test protocols, and thus lack of standardisation prevents both robust conclusions and comparison between studies. Furthermore, the figures of merit of such studies are often ill-defined, out of step with commercial requirements and established only for non-relevant formats. Herein, we utilise LiMn0.6Fe0.4PO4\\Graphite (LMFP\\Gr) coin (half and full) and full pouch cells to demonstrate these sensitivities. Cell format, electrode coat weight/porosity, and the inclusion of a constant voltage step during charge, are shown to dramatically alter the capacity observed at high C-rate in otherwise identical cells, reinforcing the advantages of testing in real-world conditions and the need for consistency between test samples/studies. To resolve this, we propose a commercially meaningful and industrially relevant protocol to evaluate fast-charging capabilities of Li-ion batteries.
- Open Access
- 18 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Practical pathways to higher energy density LMFP battery cathodes
The design of new lithium-ion battery (LIB) cathode materials must balance many factors: performance, cost, manufacturability, safety, critical mineral usage and geopolitical constraints. Recently commercialised LiMnxFe1-xPO4 (LMFP) materials offer good energy density & stability, low material cost and excellent safety characteristics, avoiding the use of Co or Ni. Within this material set lies a wide variety of potential formulations (Mn/Fe ratio) exhibiting varied cathode properties and challenges. In this work, we assessed three commercially available LMFP materials with Mn content in the range 60 – 80 % in a full cell format, confirming the role of Mn/Fe ratio on specific capacity, energy density and electrochemical stability. High Mn content increased the average discharge voltage while maintaining specific discharge capacity, with 80 % Mn providing an 18 % boost to initial gravimetric energy density over LFP. However, worse kinetics and increased capacity fade rate resulted in the reduction and eventual elimination of this energy density advantage after 100 cycles. A blend cathode (LMFP and LiNi0.8Mn0.1Co0.1O2, NMC811) was also evaluated, exhibiting characteristics of both material types. An initial 23 % boost to energy density over LMFP alone was diluted following NMC-dominated degradation in early cycles, but enhanced capacity retention over NMC811 alone remained in long-term cycling. This work highlights the potential advantages of these newly commercialised materials, while identifying outstanding challenges to widespread adoption and exploitation.
- 18 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPractical pathways to higher energy density LMFP battery cathodes
The design of new lithium-ion battery (LIB) cathode materials must balance many factors: performance, cost, manufacturability, safety, critical mineral usage and geopolitical constraints. Recently commercialised LiMnxFe1-xPO4 (LMFP) materials offer good energy density & stability, low material cost and excellent safety characteristics, avoiding the use of Co or Ni. Within this material set lies a wide variety of potential formulations (Mn/Fe ratio) exhibiting varied cathode properties and challenges. In this work, we assessed three commercially available LMFP materials with Mn content in the range 60 – 80 % in a full cell format, confirming the role of Mn/Fe ratio on specific capacity, energy density and electrochemical stability. High Mn content increased the average discharge voltage while maintaining specific discharge capacity, with 80 % Mn providing an 18 % boost to initial gravimetric energy density over LFP. However, worse kinetics and increased capacity fade rate resulted in the reduction and eventual elimination of this energy density advantage after 100 cycles. A blend cathode (LMFP and LiNi0.8Mn0.1Co0.1O2, NMC811) was also evaluated, exhibiting characteristics of both material types. An initial 23 % boost to energy density over LMFP alone was diluted following NMC-dominated degradation in early cycles, but enhanced capacity retention over NMC811 alone remained in long-term cycling. This work highlights the potential advantages of these newly commercialised materials, while identifying outstanding challenges to widespread adoption and exploitation.
- Open Access
- 18 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Fast-charging lithium-ion battery protocols: LMFP pouch cells as a rate capability case study
The reduction of battery charge times is a key challenge in the wider adoption of electric vehicles (EVs), encompassing material, cell and system design aspects. Rate capability testing, the charging and discharging of a cell at various C-rates, is the most common technique used to assess the performance of Li-ion batteries, and particularly new electrode materials/cell designs, at high cycling rates. Data generated from this technique is however extremely sensitive to selected cell format and testing protocols, and thus lack of standardisation prevents both robust conclusions and comparison between studies. Furthermore, the figures of merit of such studies are often ill-defined and out of step with commercial requirements. Herein, we utilise LiMn0.6Fe0.4PO4\\Graphite (LMFP\\Gr) coin (half & full) and pouch cells to demonstrate these sensitivities. Cell format, electrode coat weight, and the inclusion of a constant voltage step during charge, are shown to dramatically alter the capacity observed at high C-rate in otherwise identical cells, reinforcing the advantages of testing in real-world conditions and the need for consistency between test samples/studies. To resolve this, we propose a commercially meaningful and industrially relevant protocol to evaluate fast-charging capabilities of Li-ion batteries.
- 18 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFast-charging lithium-ion battery protocols: LMFP pouch cells as a rate capability case study
The reduction of battery charge times is a key challenge in the wider adoption of electric vehicles (EVs), encompassing material, cell and system design aspects. Rate capability testing, the charging and discharging of a cell at various C-rates, is the most common technique used to assess the performance of Li-ion batteries, and particularly new electrode materials/cell designs, at high cycling rates. Data generated from this technique is however extremely sensitive to selected cell format and testing protocols, and thus lack of standardisation prevents both robust conclusions and comparison between studies. Furthermore, the figures of merit of such studies are often ill-defined and out of step with commercial requirements. Herein, we utilise LiMn0.6Fe0.4PO4\\Graphite (LMFP\\Gr) coin (half & full) and pouch cells to demonstrate these sensitivities. Cell format, electrode coat weight, and the inclusion of a constant voltage step during charge, are shown to dramatically alter the capacity observed at high C-rate in otherwise identical cells, reinforcing the advantages of testing in real-world conditions and the need for consistency between test samples/studies. To resolve this, we propose a commercially meaningful and industrially relevant protocol to evaluate fast-charging capabilities of Li-ion batteries.
- Open Access
- 17 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Nature of the oxygen loss induced rocksalt layer and its impact on capacity fade in Ni-rich layered oxide cathodes
In Ni-rich layered oxide cathodes, cycling above the oxygen-loss threshold voltage (~4.3 V vs. Li+/Li) promotes structural transformations at the cathode surface. These transformations can result in various thermodynamically favorable rock-salt like (RSL) structures (NiO, NiOx, and/or LiyNizO) that have different Li+ transport properties. Elucidating the precise phase type in the RSL can help determine design strategies to improve Li+ kinetics and identify design rules to suppress capacity fade in Ni-rich cathodes. This study utilizes surface-sensitive X-ray absorption spectroscopy in combination with first principles simulations and distinguishes the layered oxide spectroscopic features from surface reduced layers of pure NiO and LixNi1-xO. The transport of lithium ions through this oxygen-loss-induced surface reconstructed layer is studied with operando X-ray diffraction in a pouch cell as a function of cycling aging and constant voltage protocols.
- 17 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessNature of the oxygen loss induced rocksalt layer and its impact on capacity fade in Ni-rich layered oxide cathodes
In Ni-rich layered oxide cathodes, cycling above the oxygen-loss threshold voltage (~4.3 V vs. Li+/Li) promotes structural transformations at the cathode surface. These transformations can result in various thermodynamically favorable rock-salt like (RSL) structures (NiO, NiOx, and/or LiyNizO) that have different Li+ transport properties. Elucidating the precise phase type in the RSL can help determine design strategies to improve Li+ kinetics and identify design rules to suppress capacity fade in Ni-rich cathodes. This study utilizes surface-sensitive X-ray absorption spectroscopy in combination with first principles simulations and distinguishes the layered oxide spectroscopic features from surface reduced layers of pure NiO and LixNi1-xO. The transport of lithium ions through this oxygen-loss-induced surface reconstructed layer is studied with operando X-ray diffraction in a pouch cell as a function of cycling aging and constant voltage protocols.
- Open Access
- 18 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Metal–Ligand Redox in Layered Oxide Cathodes for Li-ion Batteries
Understanding charge compensation in Li-ion battery cathodes is crucial for improving specific capacity and cycle life. This study clarifies some of the ambiguities and inaccuracies of the commonly used ionic-bonding model that requires separate transition metal (TM) and oxygen redox regimes, using an archetypal layered oxide cathode, LiNi0.8Mn0.1Co0.1O2. Contrary to the prevalent TM-centric ionic model, this research reveals that charge compensation upon Li removal occurs without formal Ni oxidation. Instead, oxygen dominates the redox process, facilitated by strong TM–O hybridisation, forming bulk stable 3d8L and 3d8L2 electronic states, where L is a ligand hole. This model supports the observation of O K-edge resonant inelastic X-ray scattering features, often attributed to bulk O–O dimers, irrespective of the state of delithiation. Furthermore, there is no evidence of any crystallographic TM migration or void formation. Above 4.34 V vs. Li+/Li, the cathode loses surface O, forming a resistive surface rock salt layer that eventually causes capacity fade. This highlights the importance of cathode engineering when attempting to achieve higher energy densities with layered oxide cathodes where O dominates the charge compensation process.
- 18 March 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMetal–Ligand Redox in Layered Oxide Cathodes for Li-ion Batteries
Understanding charge compensation in Li-ion battery cathodes is crucial for improving specific capacity and cycle life. This study clarifies some of the ambiguities and inaccuracies of the commonly used ionic-bonding model that requires separate transition metal (TM) and oxygen redox regimes, using an archetypal layered oxide cathode, LiNi0.8Mn0.1Co0.1O2. Contrary to the prevalent TM-centric ionic model, this research reveals that charge compensation upon Li removal occurs without formal Ni oxidation. Instead, oxygen dominates the redox process, facilitated by strong TM–O hybridisation, forming bulk stable 3d8L and 3d8L2 electronic states, where L is a ligand hole. This model supports the observation of O K-edge resonant inelastic X-ray scattering features, often attributed to bulk O–O dimers, irrespective of the state of delithiation. Furthermore, there is no evidence of any crystallographic TM migration or void formation. Above 4.34 V vs. Li+/Li, the cathode loses surface O, forming a resistive surface rock salt layer that eventually causes capacity fade. This highlights the importance of cathode engineering when attempting to achieve higher energy densities with layered oxide cathodes where O dominates the charge compensation process.