Yan Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yan Ma has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Hua Lu
School of Civil Engineering, North Minzu University, Yinchuan 750021, China
2 shared publications - Xiaotong Ma
School of Civil Engineering, North Minzu University, Yinchuan 750021, China
2 shared publications - Jianbo Tian
School of Civil Engineering and Architecture, Xi’an University of Technology, Xi’an 710048, China
1 shared publication - Jun Yang
School of Civil Engineering, North Minzu University, Yinchuan 750021, China
1 shared publication - Licheng Ma
School of Civil Engineering, North Minzu University, Yinchuan 750021, China
1 shared publication - Yong Zhao
School of Civil Engineering and Architecture, Xi’an University of Technology, Xi’an 710048, China
1 shared publication
Latest Publications
- Open Access
Study on Restoring Force Model of Plate-Reinforced Composite Coupling Beam with Small Span-to-Depth Ratio
Coupling beams are critical connecting components in coupled shear wall systems and core tube structures. At the same time, they play an important role when the structure is subjected to an earthquake. Plate-reinforced composite (PRC) coupling beams exhibit superior comprehensive performance in terms of bearing capacity, deformation performance, energy dissipation capacity, and construction efficiency. However, research on PRC coupling beams remains limited both domestically and internationally. To better describe the structural response of steel plate–concrete composite coupling beams, this study collected existing experimental data. The beams had a small span-to-depth ratio. The loading was cyclic. The study normalized the skeleton curves of each specimen. The span-to-depth ratio ranged from 0.9 to 2.5. The plate ratio ranged from 3% to 5%. For these beams, preliminary skeleton curve fitting equations are proposed. The equations are based on existing data. The equations apply to two types of composite coupling beams. One type uses a steel plate and ordinary concrete. The other type uses a steel plate and fiber concrete. These equations are derived using a trilinear model and linear fitting tools. Furthermore, restoring force models for steel plate–conventional concrete and steel plate–fiber concrete composite coupling beams with a small span-to-depth ratio are proposed. Comparative analysis shows that each model captures the hysteretic response of PRC coupling beams with acceptable accuracy in the elastic and decline phases, while the elastic–plastic stage is suitable only for trend prediction. It should be noted that the proposed models are preliminary engineering approximations primarily applicable within the following ranges: a span-to-depth ratio of 0.9~2.5, a plate ratio of 3~5%, concrete strength of C30~C50, a longitudinal reinforcement ratio of 0.86~2.23%, a stirrup ratio of 0.56~0.63%, and a steel plate thickness of 6~10 mm. For configurations significantly outside these ranges, additional experimental validation is required.
Open AccessStudy on Restoring Force Model of Plate-Reinforced Composite Coupling Beam with Small Span-to-Depth Ratio
Coupling beams are critical connecting components in coupled shear wall systems and core tube structures. At the same time, they play an important role when the structure is subjected to an earthquake. Plate-reinforced composite (PRC) coupling beams exhibit superior comprehensive performance in terms of bearing capacity, deformation performance, energy dissipation capacity, and construction efficiency. However, research on PRC coupling beams remains limited both domestically and internationally. To better describe the structural response of steel plate–concrete composite coupling beams, this study collected existing experimental data. The beams had a small span-to-depth ratio. The loading was cyclic. The study normalized the skeleton curves of each specimen. The span-to-depth ratio ranged from 0.9 to 2.5. The plate ratio ranged from 3% to 5%. For these beams, preliminary skeleton curve fitting equations are proposed. The equations are based on existing data. The equations apply to two types of composite coupling beams. One type uses a steel plate and ordinary concrete. The other type uses a steel plate and fiber concrete. These equations are derived using a trilinear model and linear fitting tools. Furthermore, restoring force models for steel plate–conventional concrete and steel plate–fiber concrete composite coupling beams with a small span-to-depth ratio are proposed. Comparative analysis shows that each model captures the hysteretic response of PRC coupling beams with acceptable accuracy in the elastic and decline phases, while the elastic–plastic stage is suitable only for trend prediction. It should be noted that the proposed models are preliminary engineering approximations primarily applicable within the following ranges: a span-to-depth ratio of 0.9~2.5, a plate ratio of 3~5%, concrete strength of C30~C50, a longitudinal reinforcement ratio of 0.86~2.23%, a stirrup ratio of 0.56~0.63%, and a steel plate thickness of 6~10 mm. For configurations significantly outside these ranges, additional experimental validation is required.
- Open Access
- 18 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11824
Anti-Seismic Performance Research of Complicated Nodes Involved in Ultra-Limited Steel Structures Subjected to Rare Occurrence Earthquakes
This study focuses on the seismic performance of complicated nodes in the ultra-limited steel structure under rare occurrence earthquakes. The Xi’an Urban Exhibition Center (Chang’an Cloud) is chosen as the engineering background, and the ANSYS (18.0) analysis software is employed. Based on the overall importance and the extent of post-damage impacts, the critical nodes are selected for structural design. The research aims to develop simplified and reliable structural forms that can withstand the most adverse conditions at both the overall nodes and local component levels. Stress distribution under the most unfavorable scenarios is calculated to achieve the seismic design objectives of the overall structure. The research results indicate that localized stress concentration areas can reach or exceed the yield strength of the steel, which enters the plastic phase. The Von Mises stresses in the remaining nodes are lower than the yield strength of the steel. The overall performance is excellent without significant plastic deformation. Thus, the design requirements for non-yielding performance under rare seismic events are met. The conclusions can provide reliable references for the critical structural techniques and seismic design of complicated nodes.
- 18 December 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (24) , 11824
Open AccessAnti-Seismic Performance Research of Complicated Nodes Involved in Ultra-Limited Steel Structures Subjected to Rare Occurrence Earthquakes
This study focuses on the seismic performance of complicated nodes in the ultra-limited steel structure under rare occurrence earthquakes. The Xi’an Urban Exhibition Center (Chang’an Cloud) is chosen as the engineering background, and the ANSYS (18.0) analysis software is employed. Based on the overall importance and the extent of post-damage impacts, the critical nodes are selected for structural design. The research aims to develop simplified and reliable structural forms that can withstand the most adverse conditions at both the overall nodes and local component levels. Stress distribution under the most unfavorable scenarios is calculated to achieve the seismic design objectives of the overall structure. The research results indicate that localized stress concentration areas can reach or exceed the yield strength of the steel, which enters the plastic phase. The Von Mises stresses in the remaining nodes are lower than the yield strength of the steel. The overall performance is excellent without significant plastic deformation. Thus, the design requirements for non-yielding performance under rare seismic events are met. The conclusions can provide reliable references for the critical structural techniques and seismic design of complicated nodes.