Emmanuel Nwaka Nwaka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Emmanuel Nwaka Nwaka has a total of 29 co-authors. Here are the top co-authors by number of shared publications:
- Ugochukwu Chibuzo Akomah
Department of Chemical Engineering, Federal University of Technology Owerri, Imo State, Nigeria
2 shared publications - Abdulsalam Babaniya Muhammad1 shared publication
- Abubakar Abdullahi Garbati
Civil Engineering and Built Environment, Patrice Lumumba Peoples' Friendship University of Russia, Russia
1 shared publication Akinsanmi S. Ige
Department of Materials Science and Engineering, University of Arizona, USA
1 shared publication- Amaku Chukwuebuka Marcellinus
Department of Civil Engineering, Federal University of Technology Owerri, NIGERIA
1 shared publication - Bankole Emmanuel Aanu
Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, New York, USA
1 shared publication
Latest Publications
- Open Access
- 1 July 2025
- Published by Modestum Ltd in European Journal of Sustainable Development Research
- Vol. 9 (3) , em0309
Optimizing the production of biodegradable chitosan-glycerol bioplastics from potato starch
This study explores the optimization of bioplastic production using chitosan and glycerol, employing a central composite design (CCD) to systematically vary the factors of chitosan loading, glycerol loading, and drying time. The primary objective is to enhance the mechanical properties and biodegradability of the resulting bioplastics. The experimental design included 20 runs with varying compositions of chitosan (0.659-2.3409 wt/wt), glycerol (0.159-1.8409 wt/vol), and drying times (4.31821-7.68179 hours). The bioplastics were characterized for tensile strength, elongation at break, and biodegradability after three weeks. The results indicated that the optimal formulation involved a balanced ratio of chitosan and glycerol with a moderate drying time, yielding bioplastics with enhanced tensile strength and biodegradability. Specifically, the optimized sample demonstrated a tensile strength of 2.25 MPa, elongation at break of 22.19%, and biodegradability of 92.31%. These findings were compared with predicted values, showing good agreement and validating the CCD model’s efficacy. This study contributes significantly to the field of bioplastic production by providing a detailed analysis of the optimal combination of chitosan and glycerol, highlighting improvements in mechanical properties and biodegradability. It also offers a comprehensive evaluation of actual vs. predicted responses, showcasing the potential of chitosan-glycerol bioplastics as a sustainable alternative to conventional plastics. Future research should focus on scaling up production, exploring additional biopolymer blends, and assessing long-term environmental impacts. This research contributes to and shows the potential of bioplastics to mitigate plastic pollution and advance sustainable materials science.
- 1 July 2025
- Published by Modestum Ltd in European Journal of Sustainable Development Research
- Vol. 9 (3) , em0309
Open AccessOptimizing the production of biodegradable chitosan-glycerol bioplastics from potato starch
This study explores the optimization of bioplastic production using chitosan and glycerol, employing a central composite design (CCD) to systematically vary the factors of chitosan loading, glycerol loading, and drying time. The primary objective is to enhance the mechanical properties and biodegradability of the resulting bioplastics. The experimental design included 20 runs with varying compositions of chitosan (0.659-2.3409 wt/wt), glycerol (0.159-1.8409 wt/vol), and drying times (4.31821-7.68179 hours). The bioplastics were characterized for tensile strength, elongation at break, and biodegradability after three weeks. The results indicated that the optimal formulation involved a balanced ratio of chitosan and glycerol with a moderate drying time, yielding bioplastics with enhanced tensile strength and biodegradability. Specifically, the optimized sample demonstrated a tensile strength of 2.25 MPa, elongation at break of 22.19%, and biodegradability of 92.31%. These findings were compared with predicted values, showing good agreement and validating the CCD model’s efficacy. This study contributes significantly to the field of bioplastic production by providing a detailed analysis of the optimal combination of chitosan and glycerol, highlighting improvements in mechanical properties and biodegradability. It also offers a comprehensive evaluation of actual vs. predicted responses, showcasing the potential of chitosan-glycerol bioplastics as a sustainable alternative to conventional plastics. Future research should focus on scaling up production, exploring additional biopolymer blends, and assessing long-term environmental impacts. This research contributes to and shows the potential of bioplastics to mitigate plastic pollution and advance sustainable materials science.
- Open Access
- 30 June 2025
- Published by 3V Wydawnictwo Naukowe Viola Vambol in Trends in Ecological and Indoor Environmental Engineering
- Vol. 3 (2) , 46-59
Life Cycle Assessment of Bioenergy Systems versus Fossil Fuel Alternatives: Insights for Sustainable Energy Transitions in Nigeria
Background: The pressing necessity to address climate change has positioned energy decarbonization at the forefront of global sustainability initiatives. Decarbonization entails diminishing carbon intensity throughout the energy value chain by transitioning from fossil fuels to low- or zero-carbon alternatives, including renewable energy, green hydrogen, and bioenergy. Nigeria, despite its abundant fossil fuel resources, experiences persistent energy instability marked by inconsistent electricity delivery, low access rates, and excessive reliance on petroleum goods. The incorporation of renewable energy sources, including solar, wind, biomass, and small hydropower, has become an essential strategy for attaining energy security, sustainability, and climate resilience. Investing in renewable energy diminishes reliance on fossil fuels while fostering job development, energy fairness, and environmental conservation. Objectives: The main objective of the current study is to comparison of environmental impacts through life cycle assessment (LCA) of two energy systems in Nigeria, namely bioenergy systems using locally available biomass as agricultural waste and traditional fossil fuel-based systems. It is expected that the study will identify key features of the two energy production approaches and provide a scientifically sound basis for the selection of cleaner energy sources, thereby facilitating Nigeria's transition to a low-carbon economy. Methods: The following databases were used in searching for secondary data used for this study: Scopus, Web of Science, ScienceDirect, Google Scholar, African Journals Online (AJOL). The keywords used for this search were: "Lifecycle Assessment", "LCA", "bioenergy", "biomass", "fossil fuels", "Nigeria", "sustainable energy", "greenhouse gas emissions", "renewable energy Nigeria". The inclusion criteria were considered in the course of this review: Studies focused on Nigeria or similar Sub-Saharan African contexts, Peer-reviewed articles, LCA studies, government and NGO reports, Publications in English from 2000 to 2024. The following exclusion criteria were used for this review: Non-peer-reviewed blogs, editorials, and news articles, Studies lacking clear LCA methodology. Results: The findings underscore the critical role of lifecycle thinking in guiding energy policy and project implementation in developing countries facing the dual challenge of expanding energy access and combating climate change. Conclusion: The lifecycle assessment of bioenergy systems compared to fossil fuel alternatives provides critical insights for shaping sustainable energy transitions in Nigeria. While fossil fuels have historically powered the nation's economy, their environmental and health impacts underscore the urgent need for cleaner alternatives. Bioenergy, with its potential to reduce greenhouse gas emissions, promote rural development, and utilize locally available biomass resources, presents a promising pathway toward sustainability.
- 30 June 2025
- Published by 3V Wydawnictwo Naukowe Viola Vambol in Trends in Ecological and Indoor Environmental Engineering
- Vol. 3 (2) , 46-59
Open AccessLife Cycle Assessment of Bioenergy Systems versus Fossil Fuel Alternatives: Insights for Sustainable Energy Transitions in Nigeria
Background: The pressing necessity to address climate change has positioned energy decarbonization at the forefront of global sustainability initiatives. Decarbonization entails diminishing carbon intensity throughout the energy value chain by transitioning from fossil fuels to low- or zero-carbon alternatives, including renewable energy, green hydrogen, and bioenergy. Nigeria, despite its abundant fossil fuel resources, experiences persistent energy instability marked by inconsistent electricity delivery, low access rates, and excessive reliance on petroleum goods. The incorporation of renewable energy sources, including solar, wind, biomass, and small hydropower, has become an essential strategy for attaining energy security, sustainability, and climate resilience. Investing in renewable energy diminishes reliance on fossil fuels while fostering job development, energy fairness, and environmental conservation. Objectives: The main objective of the current study is to comparison of environmental impacts through life cycle assessment (LCA) of two energy systems in Nigeria, namely bioenergy systems using locally available biomass as agricultural waste and traditional fossil fuel-based systems. It is expected that the study will identify key features of the two energy production approaches and provide a scientifically sound basis for the selection of cleaner energy sources, thereby facilitating Nigeria's transition to a low-carbon economy. Methods: The following databases were used in searching for secondary data used for this study: Scopus, Web of Science, ScienceDirect, Google Scholar, African Journals Online (AJOL). The keywords used for this search were: "Lifecycle Assessment", "LCA", "bioenergy", "biomass", "fossil fuels", "Nigeria", "sustainable energy", "greenhouse gas emissions", "renewable energy Nigeria". The inclusion criteria were considered in the course of this review: Studies focused on Nigeria or similar Sub-Saharan African contexts, Peer-reviewed articles, LCA studies, government and NGO reports, Publications in English from 2000 to 2024. The following exclusion criteria were used for this review: Non-peer-reviewed blogs, editorials, and news articles, Studies lacking clear LCA methodology. Results: The findings underscore the critical role of lifecycle thinking in guiding energy policy and project implementation in developing countries facing the dual challenge of expanding energy access and combating climate change. Conclusion: The lifecycle assessment of bioenergy systems compared to fossil fuel alternatives provides critical insights for shaping sustainable energy transitions in Nigeria. While fossil fuels have historically powered the nation's economy, their environmental and health impacts underscore the urgent need for cleaner alternatives. Bioenergy, with its potential to reduce greenhouse gas emissions, promote rural development, and utilize locally available biomass resources, presents a promising pathway toward sustainability.
- Open Access
- 27 November 2024
- Published by BON VIEW PUBLISHING PTE in Archives of Advanced Engineering Science
- p. 1-12
Evaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction
The increasing accumulation of plastic waste poses significant environmental challenges, contributing to pollution and resource depletion. The construction industry, traditionally reliant on non-renewable materials, faces increasing pressure to adopt sustainable practices. This study addresses the urgent need for innovative solutions that utilize recycled plastics in construction, thereby mitigating waste and enhancing material sustainability. This study aims to address the problem of plastic waste management by evaluating the production of interlocking bricks from waste polyethylene terephthalate (PET) and low-density polyethylene (LDPE) plastic. The objectives include assessing the mechanical properties, structural integrity, and durability of these polymeric bricks as sustainable alternatives to traditional building materials. Given the high rates of plastic waste generation and the reliance on natural raw materials for brick production, this research seeks to explore innovative solutions that utilize recycled materials effectively. A systematic methodology was employed to design the mixtures, focusing on varying the sand-to-polymeric waste ratios. Compressive and flexural strength tests were conducted to assess the bricks' ability to withstand vertical loads and bending forces, respectively. Water absorption and density tests were performed to determine durability and suitability for external use. Results indicated that the 70:30 PET to sand mix ratio provided the best performance, with an average compressive strength of 7.86 MPa and flexural strength of 21.94 MPa. The findings suggest that using PET plastic waste in interlocking brick production can enhance material properties while contributing to environmental sustainability. Received: 28 August 2024 | Revised: 5 November 2024 | Accepted: 18 November 2024 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data available on request from the corresponding author upon reasonable request. Author Contribution Statement Garbati Abubakar Abdullahi: Conceptualization, Writing - original draft; Muhammed Awwal Imran: Conceptualization, Writing - review & editing; Caleb Chisom Chike: Methodology, Investigation; Emmanuel Nwaka Nwaka: Formal analysis, Investigation, Writing - review & editing, Visualization; Ugochukwu Chibuzo Akoma: Software, Investigation; Ogueri Ihechimere Jael: Validation, Investigation, Resources; Samuel Oluwasijibomi Olaremi: Writing - review & editing, Visualization, Project administration; Akinsanmi S. Ige: Validation, Supervision; Amaku Chukwuebuka Marcellinus: Investigation, Resources, Project administration; Osasona Christopher Olayinka: Methodology, Project administration; Uzoma Eucharia Ibeanu: Software, Formal analysis, Supervision.
- 27 November 2024
- Published by BON VIEW PUBLISHING PTE in Archives of Advanced Engineering Science
- p. 1-12
Open AccessEvaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction
The increasing accumulation of plastic waste poses significant environmental challenges, contributing to pollution and resource depletion. The construction industry, traditionally reliant on non-renewable materials, faces increasing pressure to adopt sustainable practices. This study addresses the urgent need for innovative solutions that utilize recycled plastics in construction, thereby mitigating waste and enhancing material sustainability. This study aims to address the problem of plastic waste management by evaluating the production of interlocking bricks from waste polyethylene terephthalate (PET) and low-density polyethylene (LDPE) plastic. The objectives include assessing the mechanical properties, structural integrity, and durability of these polymeric bricks as sustainable alternatives to traditional building materials. Given the high rates of plastic waste generation and the reliance on natural raw materials for brick production, this research seeks to explore innovative solutions that utilize recycled materials effectively. A systematic methodology was employed to design the mixtures, focusing on varying the sand-to-polymeric waste ratios. Compressive and flexural strength tests were conducted to assess the bricks' ability to withstand vertical loads and bending forces, respectively. Water absorption and density tests were performed to determine durability and suitability for external use. Results indicated that the 70:30 PET to sand mix ratio provided the best performance, with an average compressive strength of 7.86 MPa and flexural strength of 21.94 MPa. The findings suggest that using PET plastic waste in interlocking brick production can enhance material properties while contributing to environmental sustainability. Received: 28 August 2024 | Revised: 5 November 2024 | Accepted: 18 November 2024 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data available on request from the corresponding author upon reasonable request. Author Contribution Statement Garbati Abubakar Abdullahi: Conceptualization, Writing - original draft; Muhammed Awwal Imran: Conceptualization, Writing - review & editing; Caleb Chisom Chike: Methodology, Investigation; Emmanuel Nwaka Nwaka: Formal analysis, Investigation, Writing - review & editing, Visualization; Ugochukwu Chibuzo Akoma: Software, Investigation; Ogueri Ihechimere Jael: Validation, Investigation, Resources; Samuel Oluwasijibomi Olaremi: Writing - review & editing, Visualization, Project administration; Akinsanmi S. Ige: Validation, Supervision; Amaku Chukwuebuka Marcellinus: Investigation, Resources, Project administration; Osasona Christopher Olayinka: Methodology, Project administration; Uzoma Eucharia Ibeanu: Software, Formal analysis, Supervision.