UAUgochukwu Chibuzo Akomah

Ugochukwu Chibuzo Akomah

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ugochukwu Chibuzo Akomah has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nano-engineered organic solid–solid phase change materials for high-efficiency thermal energy storage in renewable systems: a review

    by Ikenna Okechukwu, Nkiruka Nancy Duru, Victor Oluwatosin Anyanwu, Tolulope Christiana Erinosho, Marvellous Omamuromu Eyube, Ugochukwu Chibuzo Akomah, Humphrey Sam Samuel, Gideon Okibe

    Thermal energy storage (TES) plays a critical role in enhancing the efficiency and sustainability of renewable energy systems. Among TES technologies, phase change materials (PCMs) are widely used due to their high latent heat storage capacity. However, conventional solid–liquid PCMs suffer from leakage, structural instability, and volume expansion, which limit their practical applications. Organic solid–solid PCMs offer a promising alternative by maintaining structural integrity during phase transitions. Recent advances in nanotechnology have further enhanced the thermal properties of organic solid–solid PCMs, improving thermal conductivity, phase transition temperature control, and overall energy storage efficiency. This study explores the nano-engineering of organic solid–solid PCMs through the incorporation of nanomaterials such as metal oxides (TiO 2 , CuO, Al 2 O 3 , ZnO), carbon-based nanomaterials (graphene and carbon nanotubes), and metallic nanoparticles (Cu and Ag). These nano-engineered organic solid–solid PCMs (NEOSS-PCMs) exhibit superior thermal performance, making them suitable for applications in solar energy storage, passive building temperature regulation, and electronic thermal management. Composite formation and nano-encapsulation techniques are investigated to improve stability and prevent material degradation. This work highlights recent advancements, key challenges, and future research directions in the development of high-efficiency nano-engineered organic solid–solid PCMs for TES applications in renewable energy systems.


  • Open Access

    Nano-Engineered Organic Solid-Solid Phase Change Materials for High-Efficiency Thermal Energy Storage in Renewable Systems: A Review

    by Ikenna Okechukwu, Nkiruka Nancy Duru, Victor Oluwatosin, Tolulope Christiana Erinosho, Marvellous Omamuromu Eyube, Ugochukwu Chibuzo Akomah, Humphrey Sam Samuel, Gideon Okibe

    Thermal Energy Storage (TES) plays a critical role in enhancing the efficiency and sustainability of renewable energy systems. Among TES technologies, Phase Change Materials (PCMs) are widely used due to their high latent heat storage capacity. However, conventional solid-liquid PCMs suffer from leakage, structural instability, and volume expansion, limiting their practical applications. Organic solid-solid PCMs offer a promising alternative by maintaining their structural integrity while undergoing phase transitions. Recent advancements in nanotechnology have further enhanced the thermal properties of organic solid-solid PCMs, improving thermal conductivity, phase transition temperature control, and energy storage efficiency. This study explores the nano-engineering of organic solid-solid PCMs by incorporating nanomaterials such as metal oxides (TiO2, CuO, Al₂O₃, ZnO), carbon-based nanomaterials (graphene, carbon nanotubes), and metallic nanoparticles (Cu, Ag). These Nano-Engineered Organic Solid-Solid PCMs (NEOSS-PCMs) exhibit superior thermal performance, making them ideal for applications in solar energy storage, passive building temperature regulation, and electronic thermal management. Composite and nano-encapsulation techniques are investigated to improve stability and prevent degradation. This highlights recent advancements, key challenges, and future research directions in the development of high-efficiency nano-engineered organic solid-solid PCMs for TES in renewable energy systems.


  • Open Access

    Sustainable Biodiesel Production from Sawdust Oil Using Snail Shell-Derived Bio-Catalyst

    by Ihechukwu Daniel Osuji, Ugochukwu Chibuzo Akomah, Iyanuoluwa Esther Oyefeso, Victor Chizaram Ibekwere, Bonaventure Rapuluchukwu Ezejelue, Charles Chetachi Obiagwu, Oscar Ekeoma Ekeodu

    This study investigated the production of biodiesel from sawdust oil using a snail shell-derived calcium oxide (CaO) catalyst. The objectives were to extract and characterize oil from sawdust, synthesize and analyze a bio-based catalyst, and evaluate the properties of the biodiesel produced. Oil extraction was carried out with n-hexane, yielding 32%, which was higher than some conventional oilseeds. The extracted oil showed a pH of 6.6, density of 0.83 g/cm³, viscosity of 4.30 mm²/s, and a flash point of 133°C, indicating its suitability as a biodiesel feedstock. Snail shells were calcined at 900°C and characterized by X-ray diffraction, confirming CaO as the dominant phase. Transesterification of the oil with ethanol in the presence of the catalyst produced biodiesel that was analyzed for physicochemical properties and fatty acid composition. The biodiesel exhibited a viscosity of 2.43 mm²/s, acid value of 0.29 mg KOH/g, cetane number of 51, and flash point of 14700B0C, all within ASTM standards. GC–MS analysis revealed 17.8% saturated and 79.8% unsaturated fatty acids, providing a balance of oxidative stability and cold-flow performance. Overall, the study demonstrates that sawdust oil and snail shell-derived CaO are viable, low-cost, and sustainable materials for biodiesel production. It is recommended that further optimization of catalyst loading and reaction parameters be carried out to enhance fuel properties and promote large-scale application.


  • Open Access

    Optimizing the production of biodegradable chitosan-glycerol bioplastics from potato starch

    by Emmanuel Nwaka, Ugochukwu Chibuzo Akomah, Temple Uzoma Maduoma, Ebube Daniel Ezeokolie, Derrick Tochukwu Menankiti, Evans Osarenren, Uchechukwu Divine Donatus, Chika Happiness Orji, Chibueze Henry Ekwem, Ifeanyi Joachim Oduaro

    This study explores the optimization of bioplastic production using chitosan and glycerol, employing a central composite design (CCD) to systematically vary the factors of chitosan loading, glycerol loading, and drying time. The primary objective is to enhance the mechanical properties and biodegradability of the resulting bioplastics. The experimental design included 20 runs with varying compositions of chitosan (0.659-2.3409 wt/wt), glycerol (0.159-1.8409 wt/vol), and drying times (4.31821-7.68179 hours). The bioplastics were characterized for tensile strength, elongation at break, and biodegradability after three weeks. The results indicated that the optimal formulation involved a balanced ratio of chitosan and glycerol with a moderate drying time, yielding bioplastics with enhanced tensile strength and biodegradability. Specifically, the optimized sample demonstrated a tensile strength of 2.25 MPa, elongation at break of 22.19%, and biodegradability of 92.31%. These findings were compared with predicted values, showing good agreement and validating the CCD model’s efficacy. This study contributes significantly to the field of bioplastic production by providing a detailed analysis of the optimal combination of chitosan and glycerol, highlighting improvements in mechanical properties and biodegradability. It also offers a comprehensive evaluation of actual vs. predicted responses, showcasing the potential of chitosan-glycerol bioplastics as a sustainable alternative to conventional plastics. Future research should focus on scaling up production, exploring additional biopolymer blends, and assessing long-term environmental impacts. This research contributes to and shows the potential of bioplastics to mitigate plastic pollution and advance sustainable materials science.


  • Open Access

    Evaluating the Structural Integrity and Performance of Polyethylene Terephthalate and Low-Density Polyethylene-Based Interlocking Bricks for Sustainable Construction

    by Abubakar Abdullahi Garbati, Muhammed Awwal Imran, Caleb Chisom Chike, Emmanuel Nwaka Nwaka, Ugochukwu Chibuzo Akomah, Ihechimere Jael Ogueri, Samuel Oluwasijibomi Olaremi, Akinsanmi S. Ige, Amaku Chukwuebuka Marcellinus, Christopher Olayinka Osasona, et al.

    The increasing accumulation of plastic waste poses significant environmental challenges, contributing to pollution and resource depletion. The construction industry, traditionally reliant on non-renewable materials, faces increasing pressure to adopt sustainable practices. This study addresses the urgent need for innovative solutions that utilize recycled plastics in construction, thereby mitigating waste and enhancing material sustainability. This study aims to address the problem of plastic waste management by evaluating the production of interlocking bricks from waste polyethylene terephthalate (PET) and low-density polyethylene (LDPE) plastic. The objectives include assessing the mechanical properties, structural integrity, and durability of these polymeric bricks as sustainable alternatives to traditional building materials. Given the high rates of plastic waste generation and the reliance on natural raw materials for brick production, this research seeks to explore innovative solutions that utilize recycled materials effectively. A systematic methodology was employed to design the mixtures, focusing on varying the sand-to-polymeric waste ratios. Compressive and flexural strength tests were conducted to assess the bricks' ability to withstand vertical loads and bending forces, respectively. Water absorption and density tests were performed to determine durability and suitability for external use. Results indicated that the 70:30 PET to sand mix ratio provided the best performance, with an average compressive strength of 7.86 MPa and flexural strength of 21.94 MPa. The findings suggest that using PET plastic waste in interlocking brick production can enhance material properties while contributing to environmental sustainability. Received: 28 August 2024 | Revised: 5 November 2024 | Accepted: 18 November 2024 Conflicts of Interest The authors declare that they have no conflicts of interest to this work. Data Availability Statement Data available on request from the corresponding author upon reasonable request. Author Contribution Statement Garbati Abubakar Abdullahi: Conceptualization, Writing - original draft; Muhammed Awwal Imran: Conceptualization, Writing - review & editing; Caleb Chisom Chike: Methodology, Investigation; Emmanuel Nwaka Nwaka: Formal analysis, Investigation, Writing - review & editing, Visualization; Ugochukwu Chibuzo Akoma: Software, Investigation; Ogueri Ihechimere Jael: Validation, Investigation, Resources; Samuel Oluwasijibomi Olaremi: Writing - review & editing, Visualization, Project administration; Akinsanmi S. Ige: Validation, Supervision; Amaku Chukwuebuka Marcellinus: Investigation, Resources, Project administration; Osasona Christopher Olayinka: Methodology, Project administration; Uzoma Eucharia Ibeanu: Software, Formal analysis, Supervision.