NZNingqiang Zhu

Ningqiang Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ningqiang Zhu has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Safety of Bed-Separation Grouting Filling Mining Under a Gas Station and Its Application

    by Tao Han, Shouqian Sheng, Dawei Yin, Faxin Li, Xiao Qu, Hongfa Ma, Ningqiang Zhu

    Bed-separation grouting filling mining is a damage-mitigation mining technology characterized by non-interfering mining and filling operations, low cost, and high efficiency. To recover coal resources from the 3801 working face located beneath a surface gas station in a Shanxi coal mine, this study first analyzed the maximum allowable deformation values for the gas station’s canopy, business hall, and oil storage tanks. Second, the feasibility and safety of bed-separation grouting filling mining at the 3801 working face were investigated using physical similarity modeling and the probability integral method. Finally, a field application of this technology was carried out at the 3801 working face. The results show that: (1) After the successive mining of the 3802, 3803 and 3801 working faces, the No. 17 bed separation was finally preserved above the 3801 working face. It is located in the upper part of the water-conducting fracture zone and has a thick impermeable isolation layer. (2) Physical similarity simulation and numerical simulation (3UDEC) of bed-separation grouting filling mining at the 3801 working face indicate that the underlying strata are effectively compacted after mining, and both overlying strata movement and surface subsidence above the grouting zone are significantly reduced. (3) The probability integral method was adopted to predict surface movement and deformation induced by mining at the 3801 working face (bed-separation grouting filling mining), the 3802 working face (fully mechanized top-coal caving mining) and the 3803 working face (full-seam mining in a single lift). All surface movement and deformation indices satisfy the surface deformation control requirements for the gas station. (4) After completion of the overburden bed-separation grouting filling project at the 3801 working face, the measured surface movement and deformation values during and after mining are all below the allowable deformation limits. No large deformations or cracks occurred in gas station structures including the canopy, business hall and oil tank farm. The protection effect is satisfactory, and the gas station has maintained normal operation throughout the mining period.

  • Open Access

    Experimental Research on the Performance of All-Solid-Waste Cementitious Grouting Filling Materials

    by Ningqiang Zhu, Dawei Yin, Xuelong Li, Shouqian Sheng

    Overburden bed separation grouting is a green mining method to control surface subsidence and protect surface buildings (structures). The performance of cementitious grouting material is the key factor affecting grouting filling. Although offering good fluidity and low cost, the fly ash (FA) slurry demands a significant water supply, undergoes high dehydration rates, and lacks cementing property. These factors result in low grouting efficiency and negatively impact the safety of operations in complex-structure areas. This work developed a CBF + D series all-solid-waste cementitious grouting filling material with blast furnace slag (BFS), FA, carbide slag (CS), desulfurization gypsum (DG), and calcium chloride (CaCl2) as components. Based on the orthogonal test, the basic performance test of the grouting material was carried out using macroscopic and microscopic test methods. The influences of the water–cement ratio, the mass ratio of BFS to FA, the proportion of CS, and the proportion of DG on the slurry density, fluidity, water extraction rate, and uniaxial compressive strength (UCS) of the stone body were assessed. The material’s hydration mechanism was analyzed by combining X-ray diffraction (XRD) and scanning electron microscopy (SEM) microscopic experiments. The optimal parameters for this test were as follows: a water–cement ratio of 0.7, a mass ratio of BFS to FA of 3:1, a proportion of CS of 40%, and a proportion of DG of 4%. Under the optimal conditions, the density of the slurry was 1.41 g·cm−3, with a fluidity of 15.7 cm, a water extraction rate of 0.107, and a UCS of the stone body of 6.25 MPa. The water extraction rate of the slurry is 67% lower than that of the FA slurry and the slurry has good cementation performance, while still maintaining its fluidity. This significantly enhanced the safety and applicability of the grouting filling process. In addition, CBF + D series all-solid-waste cementitious materials have solved the large accumulation of industrial wastes such as FA, BFS, and CS, which maximized the resource utilization rate of these wastes and brought significant economic benefits.