Rodrigo Martínez-Peñuñuri
Rodrigo Martínez-Peñuñuri has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Alejandro Monserrat García-Alegría
Universidad de Sonora
3 shared publications G. González-Zamarripa
2 shared publications- Jesús Leobardo Valenzuela-García
Department of Chemical Engineering and Metallurgy, Universidad de Sonora, Hermosillo 83000, Mexico
2 shared publications - José Refugio Parga-Torres
Deparment of Materials and Metallurgy, Instituto Tecnológico de Saltillo, Tecnológico Nacional de México, Saltillo, Coahuila, Mexico
2 shared publications A.M. García-Alegría
1 shared publicationDaniel Rosales-Suárez
Ctr Invest & Desarrollo Tecnol Serv Especializado, CV Prolongac Comonfort 2050, Torreon 27300, Coahuila, Mexico
1 shared publication
Latest Publications
- 25 September 2023
- Published by Elsevier in Hydrometallurgy
- Vol. 222
Recovery of fine particles of activated carbon with gold by the electrocoagulation process using a Taguchi experimental design
- 25 September 2023
- Published by Elsevier in Hydrometallurgy
- Vol. 222
Recovery of fine particles of activated carbon with gold by the electrocoagulation process using a Taguchi experimental design
- 10 August 2023
- Published by Springer Nature in MAPAN
- Vol. 38 (4) , 1005-1018
Validation of the ASTM E1898-21 Method with Estimation of Analytical Uncertainty for the Determination of Silver by FAAS
- 10 August 2023
- Published by Springer Nature in MAPAN
- Vol. 38 (4) , 1005-1018
Validation of the ASTM E1898-21 Method with Estimation of Analytical Uncertainty for the Determination of Silver by FAAS
- Open Access
Thermodynamic and Kinetic Aspects of Gold Adsorption in Micrometric Activated Carbon and the Impact of Their Loss in Adsorption, Desorption, and Reactivation Plants
The production and loss of fine particles of activated carbon (AC) loaded with gold in the adsorption processes is a worldwide problem, mainly due to the behavior of increasing its adsorption capacity with respect to the decrease in particle size, which becomes relevant to determine the thermodynamic and kinetic activity of the gold adsorption and the economic impact of its loss, with the escape towards the later stages of the system of adsorption, desorption, and reactivation (ADR) plants of AC. Through the adsorption of gold in a synthetic medium with sodium cyanide concentration, using different particle sizes, AC weights, and adsorption times, data were generated for analysis by three different isotherm models, resulting in a better tendency for the Freundlich isotherm, from which thermodynamic parameters of ΔG equal to −2.022 kcal/mol, ΔH equal to −16.710 kcal/mol, and ΔS equal to −0.049 kcal/molK were obtained, which shows that it is a spontaneous, exothermic process with a lower degree of disorder. The kinetic analysis was performed with two different models, from which the pseudo-second-order model was used due to a better tendency and displayed a behavior that leaves open the interpretation of the increase in adsorption with respect to the decrease in the AC particle size but demonstrated the importance of recovering these particles in relation to their gold concentration and the economic impact from their poor recovery, which, for this case study, amounted to ~0.3 million dollars per year.
Open AccessThermodynamic and Kinetic Aspects of Gold Adsorption in Micrometric Activated Carbon and the Impact of Their Loss in Adsorption, Desorption, and Reactivation Plants
The production and loss of fine particles of activated carbon (AC) loaded with gold in the adsorption processes is a worldwide problem, mainly due to the behavior of increasing its adsorption capacity with respect to the decrease in particle size, which becomes relevant to determine the thermodynamic and kinetic activity of the gold adsorption and the economic impact of its loss, with the escape towards the later stages of the system of adsorption, desorption, and reactivation (ADR) plants of AC. Through the adsorption of gold in a synthetic medium with sodium cyanide concentration, using different particle sizes, AC weights, and adsorption times, data were generated for analysis by three different isotherm models, resulting in a better tendency for the Freundlich isotherm, from which thermodynamic parameters of ΔG equal to −2.022 kcal/mol, ΔH equal to −16.710 kcal/mol, and ΔS equal to −0.049 kcal/molK were obtained, which shows that it is a spontaneous, exothermic process with a lower degree of disorder. The kinetic analysis was performed with two different models, from which the pseudo-second-order model was used due to a better tendency and displayed a behavior that leaves open the interpretation of the increase in adsorption with respect to the decrease in the AC particle size but demonstrated the importance of recovering these particles in relation to their gold concentration and the economic impact from their poor recovery, which, for this case study, amounted to ~0.3 million dollars per year.
- Open Access
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Recovery of Fine Particles of Activated Carbon with Gold by the Electrocoagulation Process Using a Taguchi Experimental Design
The high efficiency of gold recovery via the industrial metallurgical process is increasingly relevant because gold is present at low concentrations in mineral bodies and is difficult to extract. In the mining–metallurgical industry, gold adsorption on activated carbon (AC) includes stages that compromise the structural integrity of the particle. In particular, carbon is an organic material that tends to wear and break down in recovery systems, causing fine particles losses of up to 41% of the average consumption (40 g/t of AC). Carbon-in-columns (CIC) for gold recovery systems lacks on a measure to prevent losses of particles <0.040 mm. Electrocoagulation (EC) technology is an option to improve AC particles recovery from CIC systems, thus increasing the recovery efficiency of ultra-fine particles of AC without requiring additional chemicals. To find the optimal working parameters of gold recovery by EC, the present study conducts laboratory-scale, batch-type EC experiments on AC particles of different sizes (0.106 and 0.053 mm) using different electrodes (iron and aluminum). The EC process was performed in synthetic aqueous medium with an AC particle concentration of 0.8000 g/L. The experimental design and results were carried on using the Taguchi statistical method. Scanning electron microscopy images of the filtered and recovered elecrocoagulated product revealed partially coated AC and aggregates of various AC particles with gold. The EC process with the aluminum electrode more effectively recovered the 0.106-mm-sized AC particles, with a more uniform coating, than EC with the iron electrode. Small particles tended to aggregate into larger particles with aluminum hydroxide species, enabling extremely fine AC particle recovery by EC. When used with the aluminum and iron electrodes, the gold–AC recoveries of the EC process exceeded 96% and 88%, respectively.
- 1 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessRecovery of Fine Particles of Activated Carbon with Gold by the Electrocoagulation Process Using a Taguchi Experimental Design
The high efficiency of gold recovery via the industrial metallurgical process is increasingly relevant because gold is present at low concentrations in mineral bodies and is difficult to extract. In the mining–metallurgical industry, gold adsorption on activated carbon (AC) includes stages that compromise the structural integrity of the particle. In particular, carbon is an organic material that tends to wear and break down in recovery systems, causing fine particles losses of up to 41% of the average consumption (40 g/t of AC). Carbon-in-columns (CIC) for gold recovery systems lacks on a measure to prevent losses of particles <0.040 mm. Electrocoagulation (EC) technology is an option to improve AC particles recovery from CIC systems, thus increasing the recovery efficiency of ultra-fine particles of AC without requiring additional chemicals. To find the optimal working parameters of gold recovery by EC, the present study conducts laboratory-scale, batch-type EC experiments on AC particles of different sizes (0.106 and 0.053 mm) using different electrodes (iron and aluminum). The EC process was performed in synthetic aqueous medium with an AC particle concentration of 0.8000 g/L. The experimental design and results were carried on using the Taguchi statistical method. Scanning electron microscopy images of the filtered and recovered elecrocoagulated product revealed partially coated AC and aggregates of various AC particles with gold. The EC process with the aluminum electrode more effectively recovered the 0.106-mm-sized AC particles, with a more uniform coating, than EC with the iron electrode. Small particles tended to aggregate into larger particles with aluminum hydroxide species, enabling extremely fine AC particle recovery by EC. When used with the aluminum and iron electrodes, the gold–AC recoveries of the EC process exceeded 96% and 88%, respectively.
- 14 January 2019
- Published by Sociedad Geologica Mexicana in Boletín de la Sociedad Geológica Mexicana
- Vol. 71 (1) , 139-168
Ensayo geometalúrgico para la recuperación de oro de la zona de sulfuros primarios de la mina La Herradura, Sonora, México
- 14 January 2019
- Published by Sociedad Geologica Mexicana in Boletín de la Sociedad Geológica Mexicana
- Vol. 71 (1) , 139-168
Ensayo geometalúrgico para la recuperación de oro de la zona de sulfuros primarios de la mina La Herradura, Sonora, México