MBM. Borashova

M. Borashova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


M. Borashova has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Investigation of the technological parameters of the catalytic reforming process

    by R.M. Dyusova, Ye.A. Zhakmanova, G.ZH. Seitenova, Borashova

    The paper presents a model of the industrial catalytic reforming process of gasoline fractions, designed for quantitative assessment of the influence of operating parameters on the yield and quality of the reformate. Based on the calculations, the effects of temperature, pressure, and feed space velocity are analyzed. Comparison of the calculated data with industrial experimental results demonstrates good agreement for the octane number, reformate yield, and the dynamics of catalyst activity loss, confirming the adequacy and predictive capability of the model. The developed model can be used as an engineering tool for optimizing the reforming operating regime, selecting compromise conditions between product quality and yield, and predicting the consequences of changes in operating parameters without performing additional experiments on the unit, thereby reducing risks and operating costs.

  • Open Access

    Design and industrial verification of the catalytic reforming process

    by R. Dyussova, G. Seitenova, M. Borashova, Ye. Zhakmanova, Ya. Sergeyevs

    Catalytic reforming with continuous catalyst regeneration (CCR) is one of the key processes in the production of high-octane gasolines. The need to improve its energy and resource efficiency while complying with modern environmental standards remains a relevant and pressing issue. Particularly challenging is the development of accurate mathematical models of this process under industrial operating conditions, considering catalyst degradation, fluctuations in feedstock composition, and significant thermal effects. The purpose of the article is to develop and calibrate a mathematical model of the CCR reforming process using Aspen HYSYS, demonstrated through a case study of the Atyrau Refinery. The research methodology includes the collection of operational data (feedstock composition, reactor parameters, catalyst properties), construction of a detailed process flowsheet, thermodynamic modeling, and calculation of material and energy balances. The developed model was calibrated using actual industrial data and tested for reproducibility and predictive accuracy. The results confirm that the proposed model reliably predicts reformate yield and octane number, as well as identifies optimal process parameters under variable production conditions. The article emphasizes the technological advantages of CCR reforming, including high process stability, extended catalyst service life, and improved energy efficiency. The practical significance of the research lies in the possibility of applying the developed model to optimize the operation of existing CCR units and for the training of engineering personnel. The proposed approach can also be adapted for other refineries with similar technological configurations.

  • Open Access

    Design and industrial verification of the catalytic reforming process

    by R. Dyussova, G. Seitenova, M. Borashova, Ye. Zhakmanova, Ya. Sergeyevs

    Catalytic reforming with continuous catalyst regeneration (CCR) is one of the key processes in the production of high-octane gasolines. The need to improve its energy and resource efficiency while complying with modern environmental standards remains a relevant and pressing issue. Particularly challenging is the development of accurate mathematical models of this process under industrial operating conditions, considering catalyst degradation, fluctuations in feedstock composition, and significant thermal effects. The purpose of the article is to develop and calibrate a mathematical model of the CCR reforming process using Aspen HYSYS, demonstrated through a case study of the Atyrau Refinery. The research methodology includes the collection of operational data (feedstock composition, reactor parameters, catalyst properties), construction of a detailed process flowsheet, thermodynamic modeling, and calculation of material and energy balances. The developed model was calibrated using actual industrial data and tested for reproducibility and predictive accuracy. The results confirm that the proposed model reliably predicts reformate yield and octane number, as well as identifies optimal process parameters under variable production conditions. The article emphasizes the technological advantages of CCR reforming, including high process stability, extended catalyst service life, and improved energy efficiency. The practical significance of the research lies in the possibility of applying the developed model to optimize the operation of existing CCR units and for the training of engineering personnel. The proposed approach can also be adapted for other refineries with similar technological configurations.

  • Open Access

    Моделирование процесса каталитического риформинга с неподвижным слоем катализатора на основе промышленных данных

    by Р. Дюсова, М. Борашова, Я. Сергеевс, И. Куанышев

    В данном исследовании была разработана кинетическая модель процесса каталитического риформинга с использованием данных с коммерческой установки с неподвижным слоем катализатора. Параметры модели были определены путем минимизации расхождений между расчетными значениями и промышленными данными, что обеспечивает высокую точность прогнозирования состава риформата. Предложенная модель сочетает в себе простоту обобщенных подходов с преимуществами более подробных моделей, что позволяет эффективно прогнозировать состав риформата и учитывать ключевые переменные процесса (температуру, давление, соотношение водорода и углеводородов и скорость подачи). Валидация была проведена как с лабораторными изотермическими данными, так и с промышленными данными, что подтвердило ее практическую применимость. Разработанное на основе этой модели программное обеспечение продемонстрировало высокую точность с погрешностью расчетов менее 3% и погрешностью определения концентрации ароматических углеводородов менее 1%. Эти результаты подтверждают точность модели, что делает ее пригодной для управления процессом в реальном времени и его оптимизации. Применение модели в промышленности позволит не только увеличить выход целевых продуктов и улучшить качество топлива, но и снизить себестоимость продукции за счет оптимизации режимов работы и продления срока службы катализатора. Учитывая ужесточение экологических норм, модель является важным инструментом для обеспечения устойчивого развития нефтеперерабатывающих заводов. Дальнейшие исследования могут улучшить интеграцию с цифровыми системами управления и оптимизировать энергоэффективность на нефтегазовых предприятиях Казахстана.


  • Open Access

    Modeling of the catalytic reforming process with a fixed catalyst bed based on industrial data

    by Yekaterina Zhakmanova, Rizagul Dyussova, Gaini Seitenova, Moldir Borashova

    This study presents the development of a mathematical model for the simulation and analysis of the catalytic reforming process using a Python-based software tool. The model captures the kinetics of hydrocarbon feedstock processing within a fixed catalyst bed, ensuring a balance between accuracy and computational efficiency. A key feature of the software is a digital flow diagram that visualizes material and energy flows at each stage of the process while displaying critical parameters such as temperature, pressure, and flow rate. To validate the model's accuracy, the calculated data were compared with experimental values obtained from commercial fixed-bed reforming units. The results showed an absolute calculation error of no more than 3%, confirming the model’s reliability in accurately describing reforming processes. Furthermore, the study investigates the effects of temperature and pressure variations on the final product yield to enhance process efficiency and optimize operating conditions.

  • Open Access

    Integration of Thermo-, Hydrodynamic, and Kinetic Factors in the Mathematical Modeling of the Catalytic Reforming Process

    by Gaini Zh. Seitenova, Rizagul M. Dyussova, Ekaterina A. Zhamanova, Yakobs Sergeevs, Moldir Barashkova, Сейтенова Гайни Жумагалиевна, Я. Сергеевс, Сергеевс Якобс, М. Борашова, Борашова Молдир

    Background: The integration of various factors affecting processes in oil refining is crucial for enhancing both the efficiency and sustainability of the industry. In a changing market and increasingly stringent environmental regulations, it is essential to continuously update approaches, develop innovative solutions, and optimize production processes to achieve the best possible outcomes. Aim: The study aims to integrate thermodynamic, kinetic and hydrodynamic aspects into a unified model, and to validate the outcome based on experimental data and real-world operating conditions to ensure the accuracy and reliability of model predictions. Materials and methods: The primary research methods include statistical data analysis, process modeling, and experimental studies at various stages of the production cycle. Results: The study identified the key parameters that significantly impact the quality of the final product and production efficiency. Furthermore, it offers recommendations for optimizing production processes based on the data obtained. Conclusion: The study concludes that integrating various factors can significantly enhance production performance and reduce refining costs. The study emphasizes the importance of an integrated approach to the management of production processes in the oil refining industry, which can facilitate the further development of the industry. The model created can be utilized for training personnel in process simulation. With its user-friendly interface, it requires no extensive programming knowledge, making it well-suited for the initial training of specialists.