Akhmet Murzagaliyev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Akhmet Murzagaliyev has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Altynbek Kaukarov
Department of Transport Equipment, Organization of Transportation and Construction, Aktobe Regional University Named After K. Zhubanov, Aktobe 030000, Kazakhstan
6 shared publications - M.K. Kuanyshev
Қ. Жұбанов атындағы Ақтөбе өңірлік университет
4 shared publications - Baurzhan Zhamanbayev
Department of Transport, Transport Equipment and Technologies, L.N. Gumilyov Eurasian National University, Astana 010008, Kazakhstan
3 shared publications - Utebayev
Department of Transport Equipment, Organization of Transportation and Construction, Aktobe Regional University Named After K. Zhubanov, Aktobe 030000, Kazakhstan
3 shared publications - Bauyrzhan Sarsembekov
Department of Transport Technology and Logistics Systems, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
2 shared publications - Madi Issabayev
Department of Transport Technology and Logistics Systems, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
2 shared publications
Latest Publications
- 30 June 2026
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 2, 2026,p. 464-479
ІШТЕН ЖАНАТЫН ҚОЗҒАЛТҚЫШТАРДАҒЫ ПОРШЕНДІК САҚИНАЛАРДЫҢ ҚҰРЫЛЫМДЫҚ ЖЕТІЛДІРУ ЖОЛДАРЫ
Бұл мақалада іштен жану қозғалтқыштарының негізгі түйіні болып табылатын цилиндр-поршендік топтың құрылымындағы аса маңызды элемент – поршендік сақиналардың конструкциялық ерекшеліктері, олардың жұмыс режиміндегі жағдайы және жалпы қозғалтқыштың энергетикалық, экологиялық және механикалық тиімділігіне тигізетін ықпалы жан-жақты қарастырылды. Зерттеу барысында поршеньді сақиналардың негізгі функционалдық түрлері талданды: сығымдау, май қырғыш және қосарланған аралас, сонымен қатар олардың геометриялық пішінінің (бөшке тәрізді, конустық, тікбұрышты профильдер), бүйір бетінің конфигурациясының және жанасу бетінің модификациясының цилиндр аймағындағы нығыздалуы мен үйкеліс деңгейіне әсері сипатталды. Пайдалану сенімділігіне қолданылатын әртүрлі материалдардың әсері көрсетілген: шойын, легирленген шойын, болат негізіндегі сақиналар және олардың тозуға төзімді жабындары: хром, молибден, нитрид, плазма. Сонымен бірге компрессиялық сақиналардың қазіргі заманауи нұсқаларына арналған патенттік зерттеу нәтижелері талданды. Әлемдік патенттік базалардағы инновациялық шешімдерге – қалыңдығын айнымалы ету, термоэлластикалық деформацияны төмендететін арнайы ойықтар, төмен үйкелісті беттеме технологиялары, жарықшақтарды оптимизациялау және газ өткізбеу қабілетін арттыратын конструкциялық жаңалықтар жатады. Жүргізілген талдаулар іштен жану қозғалтқыштарының тиімділігін арттыруда поршендік сақиналардың құрылымдық параметрлерін жетілдірудің маңызды рөл атқаратынын көрсетті. Ғылыми жұмыстың басты мақсаты – заманауи материалдар мен инженерлік-конструкторлық әдістерді пайдалана отырып, поршендік сақиналардың құрылымын оңтайландыру арқылы үйкеліс пен тозуды азайту, цилиндр-поршендік топтың ресурсын ұлғайту және қозғалтқыштың энергия тиімділігін жоғарылату жолдарын анықтау болып табылады. Кілтті сөздер: іштен жану қозғалтқышы, поршень, компрессиялық сақина, үйкеліс, цилиндр-поршендік топ, патенттік талдау.
- 30 June 2026
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 2, 2026,p. 464-479
ІШТЕН ЖАНАТЫН ҚОЗҒАЛТҚЫШТАРДАҒЫ ПОРШЕНДІК САҚИНАЛАРДЫҢ ҚҰРЫЛЫМДЫҚ ЖЕТІЛДІРУ ЖОЛДАРЫ
Бұл мақалада іштен жану қозғалтқыштарының негізгі түйіні болып табылатын цилиндр-поршендік топтың құрылымындағы аса маңызды элемент – поршендік сақиналардың конструкциялық ерекшеліктері, олардың жұмыс режиміндегі жағдайы және жалпы қозғалтқыштың энергетикалық, экологиялық және механикалық тиімділігіне тигізетін ықпалы жан-жақты қарастырылды. Зерттеу барысында поршеньді сақиналардың негізгі функционалдық түрлері талданды: сығымдау, май қырғыш және қосарланған аралас, сонымен қатар олардың геометриялық пішінінің (бөшке тәрізді, конустық, тікбұрышты профильдер), бүйір бетінің конфигурациясының және жанасу бетінің модификациясының цилиндр аймағындағы нығыздалуы мен үйкеліс деңгейіне әсері сипатталды. Пайдалану сенімділігіне қолданылатын әртүрлі материалдардың әсері көрсетілген: шойын, легирленген шойын, болат негізіндегі сақиналар және олардың тозуға төзімді жабындары: хром, молибден, нитрид, плазма. Сонымен бірге компрессиялық сақиналардың қазіргі заманауи нұсқаларына арналған патенттік зерттеу нәтижелері талданды. Әлемдік патенттік базалардағы инновациялық шешімдерге – қалыңдығын айнымалы ету, термоэлластикалық деформацияны төмендететін арнайы ойықтар, төмен үйкелісті беттеме технологиялары, жарықшақтарды оптимизациялау және газ өткізбеу қабілетін арттыратын конструкциялық жаңалықтар жатады. Жүргізілген талдаулар іштен жану қозғалтқыштарының тиімділігін арттыруда поршендік сақиналардың құрылымдық параметрлерін жетілдірудің маңызды рөл атқаратынын көрсетті. Ғылыми жұмыстың басты мақсаты – заманауи материалдар мен инженерлік-конструкторлық әдістерді пайдалана отырып, поршендік сақиналардың құрылымын оңтайландыру арқылы үйкеліс пен тозуды азайту, цилиндр-поршендік топтың ресурсын ұлғайту және қозғалтқыштың энергия тиімділігін жоғарылату жолдарын анықтау болып табылады. Кілтті сөздер: іштен жану қозғалтқышы, поршень, компрессиялық сақина, үйкеліс, цилиндр-поршендік топ, патенттік талдау.
- 30 June 2026
- Published by K. Zhubanov Aktobe Regional University in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
- Vol. 84 (2) , 23-30
ЗАМАНАУИ СУЛЫ-НИТРАТТЫ ОТЫННЫҢ ҚЫЗУЫНАН ЖАҢА ОТЫН-СУЛЫҚ АККУМУЛЯТОР ЖҮЙЕСІ
When developing the system, the company sought to minimize changes to the existing engine design, which largely determined the chosen layout. Furthermore, when developing the fuel system, it was necessary to take into account the protective effects of numerous patents, which influenced a number of design decisions. Common rail fuel systems for diesel engines in high-speed vehicles vary significantly in circuit design and the structure of individual components. Therefore, the most common design variations of these systems are discussed below. The fuel system design largely depends on the engine cylinder volume. The low-pressure fuel pump supplies the required fuel to the high-pressure fuel pump. A pressure-reducing valve maintains a constant pressure at the inlet of the high-pressure fuel pump section, located in the housing. As the name suggests, high-pressure fuel pumps are designed to create high pressure in the fuel line, which must always be significantly higher than the pressure in the engine cylinder, which is necessary for the normal operation of all similar fuel injection systems. To ensure stable operation of the high-pressure sections of diesel engines and effective lubrication of their supporting structures, a supply pressure of 0.5–0.8 MPa is required.
- 30 June 2026
- Published by K. Zhubanov Aktobe Regional University in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
- Vol. 84 (2) , 23-30
ЗАМАНАУИ СУЛЫ-НИТРАТТЫ ОТЫННЫҢ ҚЫЗУЫНАН ЖАҢА ОТЫН-СУЛЫҚ АККУМУЛЯТОР ЖҮЙЕСІ
When developing the system, the company sought to minimize changes to the existing engine design, which largely determined the chosen layout. Furthermore, when developing the fuel system, it was necessary to take into account the protective effects of numerous patents, which influenced a number of design decisions. Common rail fuel systems for diesel engines in high-speed vehicles vary significantly in circuit design and the structure of individual components. Therefore, the most common design variations of these systems are discussed below. The fuel system design largely depends on the engine cylinder volume. The low-pressure fuel pump supplies the required fuel to the high-pressure fuel pump. A pressure-reducing valve maintains a constant pressure at the inlet of the high-pressure fuel pump section, located in the housing. As the name suggests, high-pressure fuel pumps are designed to create high pressure in the fuel line, which must always be significantly higher than the pressure in the engine cylinder, which is necessary for the normal operation of all similar fuel injection systems. To ensure stable operation of the high-pressure sections of diesel engines and effective lubrication of their supporting structures, a supply pressure of 0.5–0.8 MPa is required.
- Open Access
Ultrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
Open AccessUltrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
- Open Access
- 1 January 2026
- Published by L. N. Gumilyov Eurasian National University in Bulletin of L.N. Gumilyov Eurasian National University. Technical Science and Technology Series
- Vol. 154 (1) , 229-248
Prospects for the development of the outrigger designs for railway cranes
This article examines the issue of ensuring the stability and operational safety of railway recovery cranes. It demonstrates that one of the key components determining the crane’s stability during loading and transport operations is the outriggers, which absorb the majority of the forces and ensure their redistribution to the supporting surface. The aim of the study is to analyze the design solutions for outriggers of railway lifting cranes and to identify promising directions for their design improvement. Based on a patent analysis of existing technical solutions, a classification of modern outrigger designs has been developed into the following groups: systems designed to reduce unit pressure on the ground; designs differing in configuration and layout; solutions involving the use of modern materials in working elements; systems equipped with devices for monitoring crane stability during operation. Based on the identified classification criteria, a morphological table was created, allowing for the synthesis of possible design variants for outriggers, justifying the direction of further research, and determining the main parameters of the research object. A comparative analysis of existing methods for calculating the stability of railway cranes with outriggers has been carried out. The prospect of increasing the efficiency of the support elements by optimizing their configuration and using modern composite materials is shown.
- 1 January 2026
- Published by L. N. Gumilyov Eurasian National University in Bulletin of L.N. Gumilyov Eurasian National University. Technical Science and Technology Series
- Vol. 154 (1) , 229-248
Open AccessProspects for the development of the outrigger designs for railway cranes
This article examines the issue of ensuring the stability and operational safety of railway recovery cranes. It demonstrates that one of the key components determining the crane’s stability during loading and transport operations is the outriggers, which absorb the majority of the forces and ensure their redistribution to the supporting surface. The aim of the study is to analyze the design solutions for outriggers of railway lifting cranes and to identify promising directions for their design improvement. Based on a patent analysis of existing technical solutions, a classification of modern outrigger designs has been developed into the following groups: systems designed to reduce unit pressure on the ground; designs differing in configuration and layout; solutions involving the use of modern materials in working elements; systems equipped with devices for monitoring crane stability during operation. Based on the identified classification criteria, a morphological table was created, allowing for the synthesis of possible design variants for outriggers, justifying the direction of further research, and determining the main parameters of the research object. A comparative analysis of existing methods for calculating the stability of railway cranes with outriggers has been carried out. The prospect of increasing the efficiency of the support elements by optimizing their configuration and using modern composite materials is shown.
- Open Access
- 17 December 2025
- Published by MDPI AG in Preprints.org
Ultrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
- 17 December 2025
- Published by MDPI AG in Preprints.org
Open AccessUltrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
- 30 December 2024
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 4.2024,p. 334-348
АВТОСЕРВИСТІК КӘСІПОРЫННЫҢ ЖҰМЫС БАҒДАРЛАМАСЫН МОДЕЛЬДЕУ
Көлік кәсіпорындарының өндірістік қызметінде әлеуметтік – экономикалық жағдайға, өндірістік сипаттағы объективті себептер кешеніне, тиісті материалдық – техникалық базалардың болуына, оларды тиімді пайдалануға және кәсіпорындардың сапалы менеджментіне байланысты олардың экономикалық және еңбек шығындарын оңтайландыру мәселелері маңызды орын алады. Бұл жұмыста қазіргі жағдайда автомобильдерге техникалық қызмет көрсету станцияларының (ТҚКС) жұмыс бағдарламасын (тапсырыс портфолиосын) қалыптастыру ерекшеліктері келтірілген және олардың тұрақтылығын қамтамасыз етуге баса назар аударылған. Жұмысты жазудың негізгі әдісі - математикалық модельдеу, математикалық және статистикалық талдау әдістері және басқалар. Жұмыста ТҚКС өндірістік бағдарламасы кездейсоқ тәртіппен кәсіпорынға түсетін істен шығулар мен ақаулардың қосындысы ретінде ұсынылған. Эксперименттік зерттеулердің нәтижелері ықтималдықтар теориясы мен математикалық статистиканың ережелері негізінде өңделген, жылдық бағдарламаның математикалық модельдері және оны берілген уақыт аралығында бөлу ықтималдығы алынған. ТҚКС құрылымдарының біркелкі жүктелуін қамтамасыз ету арқылы өндірістік бағдарламаны оңтайландыру бойынша іс-шаралар ұсынылған. Сондай-ақ, белгілі бір нәтижелерге негізделген теориялық әдістер бар. Бұл зерттеуде автокөлік мекемелерін жобалау саласындағы эксперименттік-теориялық зерттеулер келтірілген және кәсіпорынға келетін көлік санын топтастыру негізінде жылдық бағдарламаны есептеу әдісі негізделген. Кілтті сөздер: автокөліктендіру; автокөлік құралдары, техникалық қызмет станциясы, Пуассон заңы, кездейсоқ процестер, регрессия теңдеулері.
- 30 December 2024
- Published by Toraighyrov University in Science and Technology of Kazakhstan
- No. 4.2024,p. 334-348
АВТОСЕРВИСТІК КӘСІПОРЫННЫҢ ЖҰМЫС БАҒДАРЛАМАСЫН МОДЕЛЬДЕУ
Көлік кәсіпорындарының өндірістік қызметінде әлеуметтік – экономикалық жағдайға, өндірістік сипаттағы объективті себептер кешеніне, тиісті материалдық – техникалық базалардың болуына, оларды тиімді пайдалануға және кәсіпорындардың сапалы менеджментіне байланысты олардың экономикалық және еңбек шығындарын оңтайландыру мәселелері маңызды орын алады. Бұл жұмыста қазіргі жағдайда автомобильдерге техникалық қызмет көрсету станцияларының (ТҚКС) жұмыс бағдарламасын (тапсырыс портфолиосын) қалыптастыру ерекшеліктері келтірілген және олардың тұрақтылығын қамтамасыз етуге баса назар аударылған. Жұмысты жазудың негізгі әдісі - математикалық модельдеу, математикалық және статистикалық талдау әдістері және басқалар. Жұмыста ТҚКС өндірістік бағдарламасы кездейсоқ тәртіппен кәсіпорынға түсетін істен шығулар мен ақаулардың қосындысы ретінде ұсынылған. Эксперименттік зерттеулердің нәтижелері ықтималдықтар теориясы мен математикалық статистиканың ережелері негізінде өңделген, жылдық бағдарламаның математикалық модельдері және оны берілген уақыт аралығында бөлу ықтималдығы алынған. ТҚКС құрылымдарының біркелкі жүктелуін қамтамасыз ету арқылы өндірістік бағдарламаны оңтайландыру бойынша іс-шаралар ұсынылған. Сондай-ақ, белгілі бір нәтижелерге негізделген теориялық әдістер бар. Бұл зерттеуде автокөлік мекемелерін жобалау саласындағы эксперименттік-теориялық зерттеулер келтірілген және кәсіпорынға келетін көлік санын топтастыру негізінде жылдық бағдарламаны есептеу әдісі негізделген. Кілтті сөздер: автокөліктендіру; автокөлік құралдары, техникалық қызмет станциясы, Пуассон заңы, кездейсоқ процестер, регрессия теңдеулері.
- 1 January 2024
- Published by L. N. Gumilyov Eurasian National University in Bulletin of L.N. Gumilyov Eurasian National University. Technical Science and Technology Series
- Vol. 147 (2) , 219-230
Experimental research in the field of creation of a two-stroke engine under similar conditions of use
The article applies to similar conditions of use and the creation of a competitive two-stroke engine. Currently, there are prerequisites for creating an effective two-stroke engine, such as direct-flow scavenging, a valve-slotted gas distribution system with a multi-valve mechanism, hydraulic valve control, a diesel cycle with a high compression ratio, etc. To implement a set of promising technical solutions, a design basis is required, on the basis of which a two-stroke engine can be configured. As such, a crank-yoke kinematic mechanism for converting motion was chosen. The mechanism unloads the piston from lateral forces and allows the cylinder to be isolated from the oil sump, using the sub-piston volume as a purge pump. This required the development and research of a cylinder-piston group based on solid lubricant. The sliding bearing has also been improved with improved quality indicators based on the use of thermally conductive and antifriction materials of copper and graphite.
- 1 January 2024
- Published by L. N. Gumilyov Eurasian National University in Bulletin of L.N. Gumilyov Eurasian National University. Technical Science and Technology Series
- Vol. 147 (2) , 219-230
Experimental research in the field of creation of a two-stroke engine under similar conditions of use
The article applies to similar conditions of use and the creation of a competitive two-stroke engine. Currently, there are prerequisites for creating an effective two-stroke engine, such as direct-flow scavenging, a valve-slotted gas distribution system with a multi-valve mechanism, hydraulic valve control, a diesel cycle with a high compression ratio, etc. To implement a set of promising technical solutions, a design basis is required, on the basis of which a two-stroke engine can be configured. As such, a crank-yoke kinematic mechanism for converting motion was chosen. The mechanism unloads the piston from lateral forces and allows the cylinder to be isolated from the oil sump, using the sub-piston volume as a purge pump. This required the development and research of a cylinder-piston group based on solid lubricant. The sliding bearing has also been improved with improved quality indicators based on the use of thermally conductive and antifriction materials of copper and graphite.