Utebayev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Utebayev has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Akhmet Murzagaliyev
Department of Transport Equipment, Organization of Transportation and Construction, Aktobe Regional University Named After K. Zhubanov, Aktobe 030000, Kazakhstan
3 shared publications - Altynbek Kaukarov
Department of Transport Equipment, Organization of Transportation and Construction, Aktobe Regional University Named After K. Zhubanov, Aktobe 030000, Kazakhstan
3 shared publications - Bauyrzhan Sarsembekov
Department of Transport Technology and Logistics Systems, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
2 shared publications - Madi Issabayev
Department of Transport Technology and Logistics Systems, Abylkas Saginov Karaganda Technical University, Karaganda 100027, Kazakhstan
2 shared publications - Nursultan Zharkenov
Abylkas Saginov Karaganda Technical University
2 shared publications - Baurzhan Zhamanbayev
Department of Transport, Transport Equipment and Technologies, L.N. Gumilyov Eurasian National University, Astana 010008, Kazakhstan
1 shared publication
Latest Publications
- 30 June 2026
- Published by K. Zhubanov Aktobe Regional University in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
- Vol. 84 (2) , 23-30
ЗАМАНАУИ СУЛЫ-НИТРАТТЫ ОТЫННЫҢ ҚЫЗУЫНАН ЖАҢА ОТЫН-СУЛЫҚ АККУМУЛЯТОР ЖҮЙЕСІ
When developing the system, the company sought to minimize changes to the existing engine design, which largely determined the chosen layout. Furthermore, when developing the fuel system, it was necessary to take into account the protective effects of numerous patents, which influenced a number of design decisions. Common rail fuel systems for diesel engines in high-speed vehicles vary significantly in circuit design and the structure of individual components. Therefore, the most common design variations of these systems are discussed below. The fuel system design largely depends on the engine cylinder volume. The low-pressure fuel pump supplies the required fuel to the high-pressure fuel pump. A pressure-reducing valve maintains a constant pressure at the inlet of the high-pressure fuel pump section, located in the housing. As the name suggests, high-pressure fuel pumps are designed to create high pressure in the fuel line, which must always be significantly higher than the pressure in the engine cylinder, which is necessary for the normal operation of all similar fuel injection systems. To ensure stable operation of the high-pressure sections of diesel engines and effective lubrication of their supporting structures, a supply pressure of 0.5–0.8 MPa is required.
- 30 June 2026
- Published by K. Zhubanov Aktobe Regional University in Научный журнал "Вестник Актюбинского регионального университета имени К. Жубанова"
- Vol. 84 (2) , 23-30
ЗАМАНАУИ СУЛЫ-НИТРАТТЫ ОТЫННЫҢ ҚЫЗУЫНАН ЖАҢА ОТЫН-СУЛЫҚ АККУМУЛЯТОР ЖҮЙЕСІ
When developing the system, the company sought to minimize changes to the existing engine design, which largely determined the chosen layout. Furthermore, when developing the fuel system, it was necessary to take into account the protective effects of numerous patents, which influenced a number of design decisions. Common rail fuel systems for diesel engines in high-speed vehicles vary significantly in circuit design and the structure of individual components. Therefore, the most common design variations of these systems are discussed below. The fuel system design largely depends on the engine cylinder volume. The low-pressure fuel pump supplies the required fuel to the high-pressure fuel pump. A pressure-reducing valve maintains a constant pressure at the inlet of the high-pressure fuel pump section, located in the housing. As the name suggests, high-pressure fuel pumps are designed to create high pressure in the fuel line, which must always be significantly higher than the pressure in the engine cylinder, which is necessary for the normal operation of all similar fuel injection systems. To ensure stable operation of the high-pressure sections of diesel engines and effective lubrication of their supporting structures, a supply pressure of 0.5–0.8 MPa is required.
- Open Access
Ultrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
Open AccessUltrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
- Open Access
- 17 December 2025
- Published by MDPI AG in Preprints.org
Ultrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.
- 17 December 2025
- Published by MDPI AG in Preprints.org
Open AccessUltrasonic–Laser Hybrid Treatment for Cleaning Gasoline Engine Exhaust: An Experimental Study
Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO2, and O2, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO2 fraction and decreasing O2 content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow.