DLDongwoo Lee

Dongwoo Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dongwoo Lee has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Empirical Softplus-Based Fitting Function for Magnetic Field-Angle-Temperature Dependent Critical Current in Commercial REBCO Wires

    by Kibum Choi, Jung Tae Lee, Jaemin Kim, Hyunsoo Park, Chaemin Im, Jonghoon Yoon, Dongwoo Lee, Seungyong Hahn

    Accurately estimating the critical current of superconducting wires is essential for the reliable design and simulation of high-performance superconducting magnets. In particular, understanding its temperature dependence is vital for realistic quench simulations. Commercial REBCO wires—also known as 2G HTS wires or REBCO coated conductors—feature oriented crystalline structures in their REBCO layers. These orientations result in a critical current that varies with the angle of the applied magnetic field. Although several models exist for estimating the critical current of REBCO wires, a widely accepted fitting function that simultaneously accounts for magnetic field strength, field orientation, and temperature seems to be absent. In this work, we introduce an empirical fitting function based on the softplus formulation that captures all three dependencies. The proposed model is fitted to experimental data from various manufacturers and demonstrates good agreement across a wide range of temperatures and field orientations. Additionally, we discuss the quantification of uncertainties associated with both the fitted parameters and the predicted critical currents. By deriving analytical expressions for confidence intervals using a log-transformed regression framework, we provide statistical measures of reliability for each prediction. These uncertainty estimates are critical for ensuring safe and robust operation of superconducting systems, enabling probabilistic design margins and informed engineering decisions

  • Inter-Tape Contact Resistance Characterization of Soldered Stacked-Tape Cable Samples in Liquid Nitrogen

    by Dongwoo Lee, Jaemin Kim, Ye Lim Lee, Sangwon Yoon, Wonseok Jang, Jung Tae Lee, Sehyun Cho, Gaël Berthet, Dohyun Baek, Shailendra Chouhan, et al.

    We experimentally measured and numerically modeled inter-tape contact resistance in reduced-scale soldered tape stacks. Nine cable-type specimens—seven 30 cm-long samples with 30 or 69 of 4 mm-wide REBCO tapes and two 100 cm-long samples with 104 and 106 of 12 mm-wide tapes—were manually fabricated using pre-cut long REBCO tapes to facilitate four-point voltage measurements. Measured inter-tape resistivities ranged from 30 n$\Omega$ $\cdot$ m to 733 n$\Omega$ $\cdot$ m, with the best soldered stacks averaged 47 n$\Omega$ $\cdot$ m whereas the unsoldered and poorly soldered cases averaged 516 n$\Omega$ $\cdot$ m and 683 n$\Omega$$\cdot$ m. A two-dimensional finite-element model assuming perfectly aligned tapes and tunable solder resistivity reproduced these trends, confirming the dominant role of edge-solder conductivity in reducing contact resistance. Cross-sectional microscopy corroborated the link between solder distribution and electrical performance, showing that edge-solder voids are the primary resistance driver. This combined methodology provides a practical framework for quality control and design optimization of high-current HTS cables in fusion magnet applications.

  • Design Study of Fully Superconducting Motor With MgB$_{2}$ Wire and YBCO Bulk Combination for Brushless Operation

    by Jaheum Koo, JuKyung Cha, Jonghoon Yoon, Wonseok Jang, Dongwoo Lee, In Gyeong Park, Sang Heon Lee, Seungyong Hahn, Sangjin Lee

    In response to increasing environmental regulations and the push towards electrification, superconducting motors have gained significant interest due to their high power density potential. This paper presents the design and analysis of a conceptual fully superconducting brushless motor featuring MgB$_{2}$ armature windings and YBCO bulk superconductors in the rotor. The proposed motor utilizes post-assembly magnetization using field cooling, achieving a trapped magnetic field exceeding 2 T. Through optimization and magnetization analysis, the YBCO bulk-type designed motor calculated a 61% improvement in power density compared to a permanent magnet-type designed motor. The design also shows thermal losses of 1.58 kW, which can be effectively covered using LH$_{2}$ cooling. These results present the feasibility of a high-performance, brushless design with HTS bulk field magnets, paving the way for relatively compact cryogenic motor applications.


  • Numerical Study of Screening Current on HTS Stellarator Coil and Experimental Validation Through Screening Current Induced Voltage

    by Geonyoung Kim, Nicolo Riva, Sehyun Cho, Dongwoo Lee, Wonseok Jang, Hyunsoo Park, Chaemin Im, Jung Tae Lee, Yufan Yan, Jaemin Kim, et al.

    This study presents a numerical model for simulating screening current distribution in REBCO stellarator coils using a distributed-circuit approach with widthwise segmentation. By applying an equipotential assumption along the conductor‘s width, which can generally be applied, the model reduces the number of circuit elements, enabling efficient calculation of electromagnetic and thermal parameters such as current distribution and AC loss within a short time. Experimental validation using a 1/20-scale stellarator coil confirmed the model's accuracy in predicting the effects of screening current on voltage profiles during repeated operations. The results indicate that voltage measurements can effectively estimate screening currents in high-temperature superconducting (HTS) magnets.

  • Potential Joint Damage in a REBCO MRI Magnet Due to the Gradient Coil-Induced Vibration

    by Wonju Jung, Kibum Choi, Hyunsoo Park, Geonyoung Kim, Jeonghwan Park, Dongwoo Lee, Jung Tae Lee, Seungyong Hahn

    This study investigates the potential for joint damage in REBCO MRI magnets due to mechanical vibration induced by gradient coil operation. A 6 T REBCO MRI magnet, developed as part of the Korea Medical Device Development Fund (KMDF) project, was analyzed to assess its susceptibility to gradient coil-induced vibrations. The eigenfrequency range of the magnet was identified to be within 1,787–2,000 Hz, which overlaps with the operational frequency range of the gradient coil (1–2,000 Hz). Simulations using a simplified two single pancake (SP) coil model revealed that peak stress levels at the joints could reach up to 700 MPa during resonance, approaching the tensile limit of REBCO tapes. The study suggests operating the gradient coil at frequencies at least 500 Hz away from the identified resonance range to prevent potential joint damage. Additionally, the use of wider joints between SP coils is recommended to concentrate resonance frequencies, making it easier to avoid dangerous operating conditions.

  • Experimental Study on Shrink-Fitted REBCO Pancake Coils

    by Dongwoo Lee, Jaemin Kim, Wonseok Jang, Geonyoung Kim, Hyunsoo Park, Jung Tae Lee, Jeonghwan Park, Jonghoon Yoon, Chaemin Im, Wonju Jung, et al.

    This study focuses on two challenges associated with pancake-wound REBCO magnets: 1) mechanical damage in module coils 2) issues related to electrical joint implementation. Shrink-fitting an external ring structure around the pancake coil can resolve the problems by inducing compressive radial and hoop stress, opposing magnetic stress. Moreover, the ring can serve as an electrical joint between pancake coils, facilitating the easy replacement of malfunctioning module coils within this joint structure. In this study, we fabricated a small pancake wound no-insulation magnet with copper shrink-fit joints. Each pancake is surrounded by a ring-shaped copper structure with a rectangular cross-section, achieved through shrink-fitting. We present detailed manufacturing procedures and measured contact resistances. The result demonstrates that shrink-fitting can be applied to pancake wound magnets and perform novel modular design and mechanical reinforcement. This experiment suggests a new approach to implementing electric connection and reinforcement in REBCO pancake-wound magnets.