Jung Tae Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jung Tae Lee has a total of 92 co-authors. Here are the top co-authors by number of shared publications:
- Seungyong Hahn
Seoul National University
35 shared publications - Geonyoung Kim
Department of Electrical and Computer Engineering, Seoul National University, Seoul, Republic of Korea
20 shared publications - Jeseok Bang
National High Magnetic Field Laboratory, Florida State University, Tallahassee, FL, USA
19 shared publications - Chaemin Im
Department of Electrical and Computer Engineering, Seoul National University, Seoul, Republic of Korea
17 shared publications - Jaemin Kim
Department of Electrical and Computer Engineering, Seoul National University, Seoul, South Korea
13 shared publications - Jeonghwan Park
Applied Superconductivity Center, Electric Power Research Institute, Seoul National University, Seoul, Republic of Korea
13 shared publications
Latest Publications
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-6
Empirical Softplus-Based Fitting Function for Magnetic Field-Angle-Temperature Dependent Critical Current in Commercial REBCO Wires
Accurately estimating the critical current of superconducting wires is essential for the reliable design and simulation of high-performance superconducting magnets. In particular, understanding its temperature dependence is vital for realistic quench simulations. Commercial REBCO wires—also known as 2G HTS wires or REBCO coated conductors—feature oriented crystalline structures in their REBCO layers. These orientations result in a critical current that varies with the angle of the applied magnetic field. Although several models exist for estimating the critical current of REBCO wires, a widely accepted fitting function that simultaneously accounts for magnetic field strength, field orientation, and temperature seems to be absent. In this work, we introduce an empirical fitting function based on the softplus formulation that captures all three dependencies. The proposed model is fitted to experimental data from various manufacturers and demonstrates good agreement across a wide range of temperatures and field orientations. Additionally, we discuss the quantification of uncertainties associated with both the fitted parameters and the predicted critical currents. By deriving analytical expressions for confidence intervals using a log-transformed regression framework, we provide statistical measures of reliability for each prediction. These uncertainty estimates are critical for ensuring safe and robust operation of superconducting systems, enabling probabilistic design margins and informed engineering decisions
- 2 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-6
Empirical Softplus-Based Fitting Function for Magnetic Field-Angle-Temperature Dependent Critical Current in Commercial REBCO Wires
Accurately estimating the critical current of superconducting wires is essential for the reliable design and simulation of high-performance superconducting magnets. In particular, understanding its temperature dependence is vital for realistic quench simulations. Commercial REBCO wires—also known as 2G HTS wires or REBCO coated conductors—feature oriented crystalline structures in their REBCO layers. These orientations result in a critical current that varies with the angle of the applied magnetic field. Although several models exist for estimating the critical current of REBCO wires, a widely accepted fitting function that simultaneously accounts for magnetic field strength, field orientation, and temperature seems to be absent. In this work, we introduce an empirical fitting function based on the softplus formulation that captures all three dependencies. The proposed model is fitted to experimental data from various manufacturers and demonstrates good agreement across a wide range of temperatures and field orientations. Additionally, we discuss the quantification of uncertainties associated with both the fitted parameters and the predicted critical currents. By deriving analytical expressions for confidence intervals using a log-transformed regression framework, we provide statistical measures of reliability for each prediction. These uncertainty estimates are critical for ensuring safe and robust operation of superconducting systems, enabling probabilistic design margins and informed engineering decisions
- 29 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-7
Preliminary Experimental Investigation of Graded Insulation on the Performance of HTS Pancake Coils
This work investigates a preliminary implementation of the ‘graded approach’ to the transverse resistance in HTS pancake coils. This method aims to find an optimal winding approach by combining key advantages of the no-insulation (NI) and metal-insulation (MI) coils in terms of operation stability and dynamic response, through a sectional variation of the insulation level. Unlike previously reported Partial Insulation (PI) approaches, this method does not rely on a regular insulation pattern throughout the entire winding but rather allows for targeted insulation placement based on qualitative criteria. Three pancake coils were realized and tested: an NI coil, an MI coil, and a graded-insulation (GI) coil with sectionally varied stainless steel tape layers to modulate transverse resistance. All coils were tested under the same conditions in liquid nitrogen, undergoing variable current ramps and fast discharges. Multiple voltage taps and a Hall sensor were implemented in each coil to monitor their respective responses. Additionally, electrical simulations were used to model the current distribution across the coil turns. While this study does not include quench or stability analyses, it provides a first experimental insight into the graded concept, offering a potential foundation for future developments in coil optimization. The distinctive features of each coil configuration are analyzed through a comparison of the model and test results, highlighting qualitatively the possible benefits of the graded approach in specific charging and discharging scenarios.
- 29 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-7
Preliminary Experimental Investigation of Graded Insulation on the Performance of HTS Pancake Coils
This work investigates a preliminary implementation of the ‘graded approach’ to the transverse resistance in HTS pancake coils. This method aims to find an optimal winding approach by combining key advantages of the no-insulation (NI) and metal-insulation (MI) coils in terms of operation stability and dynamic response, through a sectional variation of the insulation level. Unlike previously reported Partial Insulation (PI) approaches, this method does not rely on a regular insulation pattern throughout the entire winding but rather allows for targeted insulation placement based on qualitative criteria. Three pancake coils were realized and tested: an NI coil, an MI coil, and a graded-insulation (GI) coil with sectionally varied stainless steel tape layers to modulate transverse resistance. All coils were tested under the same conditions in liquid nitrogen, undergoing variable current ramps and fast discharges. Multiple voltage taps and a Hall sensor were implemented in each coil to monitor their respective responses. Additionally, electrical simulations were used to model the current distribution across the coil turns. While this study does not include quench or stability analyses, it provides a first experimental insight into the graded concept, offering a potential foundation for future developments in coil optimization. The distinctive features of each coil configuration are analyzed through a comparison of the model and test results, highlighting qualitatively the possible benefits of the graded approach in specific charging and discharging scenarios.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Stochastic Analysis on the Factors Affecting Critical Current and Index Value of Multi-Tape Co-Wound NI HTS Coil
The estimation of critical current ($I_{\text{c}}$) and the index value for single-tape wound coils and magnets is relatively straightforward. However, for multi-tape co-wound coils, the process becomes complex due to various factors influencing current distribution within the coil. This study conducts a numerical analysis to explore these factors and their impact on the $I_{\text{c}}$ and index value of multi-tape co-wound HTS coils. An equivalent circuit model, the multi-tape turn distributed circuit, is utilized to represent each tape turn in the coil. Key parameters such as the 77K self-field $I_{\text{c}}$ of REBCO (Rare Earth Barium Copper Oxide) tape, its index value, contact resistance, and lead resistance are treated as variables during the charging simulation. A stochastic approach is employed to analyze the relationship between these parameters and the coil’s $I_{\text{c}}$ and index value through multiple simulations using randomly generated parameter values. The results demonstrate a strong correlation between the coil $I_{\text{c}}$ and the average $I_{\text{c}}$ of the REBCO tapes. Furthermore, the coil index value is found to be significantly influenced by the average contact resistivity between the REBCO tapes, and both the coil parameters are irrelevant to the tape lead resistance.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Stochastic Analysis on the Factors Affecting Critical Current and Index Value of Multi-Tape Co-Wound NI HTS Coil
The estimation of critical current ($I_{\text{c}}$) and the index value for single-tape wound coils and magnets is relatively straightforward. However, for multi-tape co-wound coils, the process becomes complex due to various factors influencing current distribution within the coil. This study conducts a numerical analysis to explore these factors and their impact on the $I_{\text{c}}$ and index value of multi-tape co-wound HTS coils. An equivalent circuit model, the multi-tape turn distributed circuit, is utilized to represent each tape turn in the coil. Key parameters such as the 77K self-field $I_{\text{c}}$ of REBCO (Rare Earth Barium Copper Oxide) tape, its index value, contact resistance, and lead resistance are treated as variables during the charging simulation. A stochastic approach is employed to analyze the relationship between these parameters and the coil’s $I_{\text{c}}$ and index value through multiple simulations using randomly generated parameter values. The results demonstrate a strong correlation between the coil $I_{\text{c}}$ and the average $I_{\text{c}}$ of the REBCO tapes. Furthermore, the coil index value is found to be significantly influenced by the average contact resistivity between the REBCO tapes, and both the coil parameters are irrelevant to the tape lead resistance.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-7
Inter-Tape Contact Resistance Characterization of Soldered Stacked-Tape Cable Samples in Liquid Nitrogen
We experimentally measured and numerically modeled inter-tape contact resistance in reduced-scale soldered tape stacks. Nine cable-type specimens—seven 30 cm-long samples with 30 or 69 of 4 mm-wide REBCO tapes and two 100 cm-long samples with 104 and 106 of 12 mm-wide tapes—were manually fabricated using pre-cut long REBCO tapes to facilitate four-point voltage measurements. Measured inter-tape resistivities ranged from 30 n$\Omega$ $\cdot$ m to 733 n$\Omega$ $\cdot$ m, with the best soldered stacks averaged 47 n$\Omega$ $\cdot$ m whereas the unsoldered and poorly soldered cases averaged 516 n$\Omega$ $\cdot$ m and 683 n$\Omega$$\cdot$ m. A two-dimensional finite-element model assuming perfectly aligned tapes and tunable solder resistivity reproduced these trends, confirming the dominant role of edge-solder conductivity in reducing contact resistance. Cross-sectional microscopy corroborated the link between solder distribution and electrical performance, showing that edge-solder voids are the primary resistance driver. This combined methodology provides a practical framework for quality control and design optimization of high-current HTS cables in fusion magnet applications.
- 12 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-7
Inter-Tape Contact Resistance Characterization of Soldered Stacked-Tape Cable Samples in Liquid Nitrogen
We experimentally measured and numerically modeled inter-tape contact resistance in reduced-scale soldered tape stacks. Nine cable-type specimens—seven 30 cm-long samples with 30 or 69 of 4 mm-wide REBCO tapes and two 100 cm-long samples with 104 and 106 of 12 mm-wide tapes—were manually fabricated using pre-cut long REBCO tapes to facilitate four-point voltage measurements. Measured inter-tape resistivities ranged from 30 n$\Omega$ $\cdot$ m to 733 n$\Omega$ $\cdot$ m, with the best soldered stacks averaged 47 n$\Omega$ $\cdot$ m whereas the unsoldered and poorly soldered cases averaged 516 n$\Omega$ $\cdot$ m and 683 n$\Omega$$\cdot$ m. A two-dimensional finite-element model assuming perfectly aligned tapes and tunable solder resistivity reproduced these trends, confirming the dominant role of edge-solder conductivity in reducing contact resistance. Cross-sectional microscopy corroborated the link between solder distribution and electrical performance, showing that edge-solder voids are the primary resistance driver. This combined methodology provides a practical framework for quality control and design optimization of high-current HTS cables in fusion magnet applications.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Numerical Study on Screening Current Induced Stress of Dry-Wound HTS Racetrack Coil
This study presents a mechanical stress analysis of a dry-wound high-temperature superconducting (HTS) racetrack coil, focusing on the effects of screening current-induced stress (SCS). A three-dimensional (3D) H-formulation was used to simulate the nonlinear current distribution caused by screening current. A modified method was applied to enforce the total current in the cross-section without having to introduce cross-sectional subdivisions separated by highly resistive layers, as required in conventional models. The coil domain was not divided into subdomains, resulting in a more continuous current distribution. The resulting Lorentz force density was used in a 3D mechanical model with turn-to-turn contact conditions to represent the dry-wound racetrack coil. The analysis showed that screening current caused both the typical expansion of the straight sections and additional tilting deformation, increasing the peak stress by 23.6%. Lastly, the three-dimensional analysis results of the racetrack coil SCS were compared with those obtained from a two-dimensional analysis based on the plane stress assumption.
- 21 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Numerical Study on Screening Current Induced Stress of Dry-Wound HTS Racetrack Coil
This study presents a mechanical stress analysis of a dry-wound high-temperature superconducting (HTS) racetrack coil, focusing on the effects of screening current-induced stress (SCS). A three-dimensional (3D) H-formulation was used to simulate the nonlinear current distribution caused by screening current. A modified method was applied to enforce the total current in the cross-section without having to introduce cross-sectional subdivisions separated by highly resistive layers, as required in conventional models. The coil domain was not divided into subdomains, resulting in a more continuous current distribution. The resulting Lorentz force density was used in a 3D mechanical model with turn-to-turn contact conditions to represent the dry-wound racetrack coil. The analysis showed that screening current caused both the typical expansion of the straight sections and additional tilting deformation, increasing the peak stress by 23.6%. Lastly, the three-dimensional analysis results of the racetrack coil SCS were compared with those obtained from a two-dimensional analysis based on the plane stress assumption.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Preliminary Study on 2 × 2 Parallel REBCO Stacks for 8 kA Current Leads
The integration of high-temperature superconducting (HTS) technology into fusion magnets necessitates advanced cabling solutions. This study presents the design and fabrication of a prototype Stacks-in-Conduit-Conductor (SICC) cable for a current lead. The current lead comprises a 2 × 2 parallel REBCO stacks, each consisting of 30 layered REBCO tapes. Three repeated experiments were conducted in a liquid nitrogen environment, applying a current of 8 kA. Voltage measurements revealed a negative voltage profile in the inter-stack voltages indicating effective current sharing among the REBCO stacks. Similar inter-stack voltage profiles were confirmed through simple circuit analysis. The loss across the REBCO stacks, including contact resistance, was measured to be less than 1 W. However, when a copper block was incorporated, the total loss of the current lead increased to approximately 5.6 W. Further improvements can be achieved by optimizing low-resistance termination joints and the volume of the copper block.
- 7 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Preliminary Study on 2 × 2 Parallel REBCO Stacks for 8 kA Current Leads
The integration of high-temperature superconducting (HTS) technology into fusion magnets necessitates advanced cabling solutions. This study presents the design and fabrication of a prototype Stacks-in-Conduit-Conductor (SICC) cable for a current lead. The current lead comprises a 2 × 2 parallel REBCO stacks, each consisting of 30 layered REBCO tapes. Three repeated experiments were conducted in a liquid nitrogen environment, applying a current of 8 kA. Voltage measurements revealed a negative voltage profile in the inter-stack voltages indicating effective current sharing among the REBCO stacks. Similar inter-stack voltage profiles were confirmed through simple circuit analysis. The loss across the REBCO stacks, including contact resistance, was measured to be less than 1 W. However, when a copper block was incorporated, the total loss of the current lead increased to approximately 5.6 W. Further improvements can be achieved by optimizing low-resistance termination joints and the volume of the copper block.
- 5 February 2025
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 38 (3) , 035003
Feasibility analysis of partially insulated Nb3Sn EU DEMO toroidal field coil
The advent of no-insulation (NI) winding technique in high temperature superconducting magnets has marked a milestone, demonstrating enhanced thermal stability and mechanical integrity in various high-field applications. There have been reports on numerical and experimental results of the application of NI-class winding techniques to low temperature superconducting (LTS) magnets, showing improved thermal stability such as significant reduction of training, stable behavior during over-current operations, and even recovery after heater-fired quench as a result of current bypass near a hot spot. Thus, the NI approach might offer potential advantage to large scale LTS fusion magnet such as reduction of peak coil terminal voltage or decrease of the copper fraction within the conductor to achieve a more compact design. However, it is essential to firstly assess the potential risks associated with NI approach to large scale LTS fusion magnet to identify any critical barriers. This paper explores the feasibility of partially insulated Nb3Sn EU DEMO toroidal field (TF) coil over a wide range of contact resistivity through two distinct partial insulation winding schemes: (1) inter-turn NI and (2) inter-layer NI scheme. Our investigation encompasses electromagnetic, structural, and thermal-hydraulic analyses to evaluate current distribution, magnet charging time, stress distribution, and temperature rise within the winding pack during magnet charging. The analysis numerically confirms the existence of a feasible design space for a partially insulated TF coil, which enables stable charging and normal operation of the magnet.
- 5 February 2025
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 38 (3) , 035003
Feasibility analysis of partially insulated Nb3Sn EU DEMO toroidal field coil
The advent of no-insulation (NI) winding technique in high temperature superconducting magnets has marked a milestone, demonstrating enhanced thermal stability and mechanical integrity in various high-field applications. There have been reports on numerical and experimental results of the application of NI-class winding techniques to low temperature superconducting (LTS) magnets, showing improved thermal stability such as significant reduction of training, stable behavior during over-current operations, and even recovery after heater-fired quench as a result of current bypass near a hot spot. Thus, the NI approach might offer potential advantage to large scale LTS fusion magnet such as reduction of peak coil terminal voltage or decrease of the copper fraction within the conductor to achieve a more compact design. However, it is essential to firstly assess the potential risks associated with NI approach to large scale LTS fusion magnet to identify any critical barriers. This paper explores the feasibility of partially insulated Nb3Sn EU DEMO toroidal field (TF) coil over a wide range of contact resistivity through two distinct partial insulation winding schemes: (1) inter-turn NI and (2) inter-layer NI scheme. Our investigation encompasses electromagnetic, structural, and thermal-hydraulic analyses to evaluate current distribution, magnet charging time, stress distribution, and temperature rise within the winding pack during magnet charging. The analysis numerically confirms the existence of a feasible design space for a partially insulated TF coil, which enables stable charging and normal operation of the magnet.
- 29 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Numerical Study of Screening Current on HTS Stellarator Coil and Experimental Validation Through Screening Current Induced Voltage
This study presents a numerical model for simulating screening current distribution in REBCO stellarator coils using a distributed-circuit approach with widthwise segmentation. By applying an equipotential assumption along the conductor‘s width, which can generally be applied, the model reduces the number of circuit elements, enabling efficient calculation of electromagnetic and thermal parameters such as current distribution and AC loss within a short time. Experimental validation using a 1/20-scale stellarator coil confirmed the model's accuracy in predicting the effects of screening current on voltage profiles during repeated operations. The results indicate that voltage measurements can effectively estimate screening currents in high-temperature superconducting (HTS) magnets.
- 29 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Numerical Study of Screening Current on HTS Stellarator Coil and Experimental Validation Through Screening Current Induced Voltage
This study presents a numerical model for simulating screening current distribution in REBCO stellarator coils using a distributed-circuit approach with widthwise segmentation. By applying an equipotential assumption along the conductor‘s width, which can generally be applied, the model reduces the number of circuit elements, enabling efficient calculation of electromagnetic and thermal parameters such as current distribution and AC loss within a short time. Experimental validation using a 1/20-scale stellarator coil confirmed the model's accuracy in predicting the effects of screening current on voltage profiles during repeated operations. The results indicate that voltage measurements can effectively estimate screening currents in high-temperature superconducting (HTS) magnets.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Potential Joint Damage in a REBCO MRI Magnet Due to the Gradient Coil-Induced Vibration
This study investigates the potential for joint damage in REBCO MRI magnets due to mechanical vibration induced by gradient coil operation. A 6 T REBCO MRI magnet, developed as part of the Korea Medical Device Development Fund (KMDF) project, was analyzed to assess its susceptibility to gradient coil-induced vibrations. The eigenfrequency range of the magnet was identified to be within 1,787–2,000 Hz, which overlaps with the operational frequency range of the gradient coil (1–2,000 Hz). Simulations using a simplified two single pancake (SP) coil model revealed that peak stress levels at the joints could reach up to 700 MPa during resonance, approaching the tensile limit of REBCO tapes. The study suggests operating the gradient coil at frequencies at least 500 Hz away from the identified resonance range to prevent potential joint damage. Additionally, the use of wider joints between SP coils is recommended to concentrate resonance frequencies, making it easier to avoid dangerous operating conditions.
- 24 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Potential Joint Damage in a REBCO MRI Magnet Due to the Gradient Coil-Induced Vibration
This study investigates the potential for joint damage in REBCO MRI magnets due to mechanical vibration induced by gradient coil operation. A 6 T REBCO MRI magnet, developed as part of the Korea Medical Device Development Fund (KMDF) project, was analyzed to assess its susceptibility to gradient coil-induced vibrations. The eigenfrequency range of the magnet was identified to be within 1,787–2,000 Hz, which overlaps with the operational frequency range of the gradient coil (1–2,000 Hz). Simulations using a simplified two single pancake (SP) coil model revealed that peak stress levels at the joints could reach up to 700 MPa during resonance, approaching the tensile limit of REBCO tapes. The study suggests operating the gradient coil at frequencies at least 500 Hz away from the identified resonance range to prevent potential joint damage. Additionally, the use of wider joints between SP coils is recommended to concentrate resonance frequencies, making it easier to avoid dangerous operating conditions.
- 23 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Experimental and Numerical Analysis on Non-Uniform Current Distribution in Two-Tape Co-Wound HTS Coil
In coils composed of stacked no-insulation (NI) high temperature superconductor (HTS) tapes, the current flow patterns can significantly differ from transposed counterparts due to larger self/mutual inductances and contact resistances. In this study, three two-tape co-wound HTS coils are wound with different insulation methods, fully insulated, NI, and partially insulated. The charging test is performed and the experimental results are analyzed by observing the voltage ratio of two tapes. The voltage ratios show deviations from the theoretical inductive voltage ratios implying uneven current distribution between the tapes. A numerical analysis is carried out with a simulation model that couples the distributed circuit model with the finite element method model to understand these phenomena. Using the model, sensitivity analysis is adopted to explain quantitatively the contributions of each circuit parameter to non-uniform current distribution. Pinpointing the precise current distribution between tapes is challenging, yet experimental and numerical analysis results show certain tendencies influenced by inductive and resistive properties.
- 23 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Experimental and Numerical Analysis on Non-Uniform Current Distribution in Two-Tape Co-Wound HTS Coil
In coils composed of stacked no-insulation (NI) high temperature superconductor (HTS) tapes, the current flow patterns can significantly differ from transposed counterparts due to larger self/mutual inductances and contact resistances. In this study, three two-tape co-wound HTS coils are wound with different insulation methods, fully insulated, NI, and partially insulated. The charging test is performed and the experimental results are analyzed by observing the voltage ratio of two tapes. The voltage ratios show deviations from the theoretical inductive voltage ratios implying uneven current distribution between the tapes. A numerical analysis is carried out with a simulation model that couples the distributed circuit model with the finite element method model to understand these phenomena. Using the model, sensitivity analysis is adopted to explain quantitatively the contributions of each circuit parameter to non-uniform current distribution. Pinpointing the precise current distribution between tapes is challenging, yet experimental and numerical analysis results show certain tendencies influenced by inductive and resistive properties.