Dragan Stojadinović
Research Subjects
Dragan Stojadinović has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandar Đurić
Military Academy , University of Defence , Veljka Lukića Kurjaka 33 Belgrade , Serbia
3 shared publications - Snežana Jovanović
Technical Test Center, Sector for mototechnical and means of river units, Department for vehicles and superstructures, Belgrade
3 shared publications - Sreten Perić
Military Academy , University of Defence , Veljka Lukića Kurjaka 33 Belgrade , Serbia
2 shared publications - Aleksandar G. Bukvić
Military Academy, University of Defence in Belgrade, Veljka Lukica Kurjaka 33, 11042 Belgrade, Serbia
1 shared publication - Martin Jovanović
Clarivate, Belgrade, Serbia
1 shared publication - Milica Ivić Nikolić
Technical Test Centre, Military Scientific Research Institution of the Serbian Army, Belgrade, Serbia
1 shared publication
Latest Publications
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 7. Section,p. 711-716
Additive manufacturing in the military industry: Resilience and sustainability for small states
Military industries operate with many opportunities, but also face obstacles in the form of political, economic or security restrictions. This paper analyzes additive manufacturing, or 3D printing, as a technology which can provide more resilient production, development, and sustainability of military capability for small states. By analyzing open-source strategic reports and scientific studies, the paper identifies three interlinked dimensions in which 3D printing can contribute to sustainable military production under various political and security conditions: security resilience, economic efficiency and environmental responsibility. The findings show that additive manufacturing can reduce dependence on imports of different components, which can mitigate challenges related to international sanctions, export restrictions or supply chain disruptions. Analyzed sources indicate that 3D printing can offer greater adaptability, lower cost, and a faster development process for small scale production. It can reduce material waste, energy consumption, transportation costs and carbon emissions. The global trends, opportunities and present risks, such as patent rights, cybersecurity and arms proliferation control are taken into consideration. Policy recommendation includes establishment of 3D printing hubs, product modification strategies and the adoption of energy efficiency and ecology standards. Overall, 3D printing can provide a higher degree of autonomy and resilience in military production for small states.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 7. Section,p. 711-716
Additive manufacturing in the military industry: Resilience and sustainability for small states
Military industries operate with many opportunities, but also face obstacles in the form of political, economic or security restrictions. This paper analyzes additive manufacturing, or 3D printing, as a technology which can provide more resilient production, development, and sustainability of military capability for small states. By analyzing open-source strategic reports and scientific studies, the paper identifies three interlinked dimensions in which 3D printing can contribute to sustainable military production under various political and security conditions: security resilience, economic efficiency and environmental responsibility. The findings show that additive manufacturing can reduce dependence on imports of different components, which can mitigate challenges related to international sanctions, export restrictions or supply chain disruptions. Analyzed sources indicate that 3D printing can offer greater adaptability, lower cost, and a faster development process for small scale production. It can reduce material waste, energy consumption, transportation costs and carbon emissions. The global trends, opportunities and present risks, such as patent rights, cybersecurity and arms proliferation control are taken into consideration. Policy recommendation includes establishment of 3D printing hubs, product modification strategies and the adoption of energy efficiency and ecology standards. Overall, 3D printing can provide a higher degree of autonomy and resilience in military production for small states.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 3. Section,p. 121-126
Practical approaches to quality testing of pioneer machines
Pioneer machines, such as diggers, are particularly challenging to test, especially under real operating conditions. This paper presents a practical approach to quality testing of pioneer machines, using a digger as a representative case study, based on procedures applied at the Technical Test Center. The study in this manuscript focuses on the implementation of testing procedures required to verify compliance with specified technical characteristics and manufacturer requirements for a digger as a representative machine for the case study. Emphasis is placed on practical testing methods used at the Technical Test Center, including measurement techniques and testing conditions that ensure reliable and repeatable results in real operating environments. The results obtained were based on precise measurements within different testing frameworks and were evaluated against relevant standards and regulatory requirements. Following the completion of all testing procedures, an overall assessment of the level of compliance with the required characteristics was conducted. In addition, the usability and future potential of the machine were evaluated from the perspective of its design and the analyzed performance characteristics.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES)
- No. 3. Section,p. 121-126
Practical approaches to quality testing of pioneer machines
Pioneer machines, such as diggers, are particularly challenging to test, especially under real operating conditions. This paper presents a practical approach to quality testing of pioneer machines, using a digger as a representative case study, based on procedures applied at the Technical Test Center. The study in this manuscript focuses on the implementation of testing procedures required to verify compliance with specified technical characteristics and manufacturer requirements for a digger as a representative machine for the case study. Emphasis is placed on practical testing methods used at the Technical Test Center, including measurement techniques and testing conditions that ensure reliable and repeatable results in real operating environments. The results obtained were based on precise measurements within different testing frameworks and were evaluated against relevant standards and regulatory requirements. Following the completion of all testing procedures, an overall assessment of the level of compliance with the required characteristics was conducted. In addition, the usability and future potential of the machine were evaluated from the perspective of its design and the analyzed performance characteristics.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Vojnotehnicki glasnik
- Vol. 74 (2) , 519-530
Experimental assessment of acoustic effects of cannon fire on crew
Introduction/purpose: The noise generated by artillery firing can have an extremely harmful effect on the people using it, namely the crew. The subject of this paper is the measurement and analysis of noise levels on artillery weapons used in the Serbian Army. Methods: The analysis and comparison of the results were carried out during operation of weapons of different calibers. Also, the aspect of impact and risk on the crew exposed to the mentioned physical phenomena was considered. Results: The results of the examination of the acoustic parameters in relation to the available criteria show that the crew on certain vehicles is exposed to a higher level of noise than allowed. Conclusion: It is concluded that all measured noise levels exceed the prescribed limit value. Based on the obtained results, further work can be done on reducing negative physical phenomena, as well as providing adequate equipment for the protection of the crew.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Vojnotehnicki glasnik
- Vol. 74 (2) , 519-530
Open AccessExperimental assessment of acoustic effects of cannon fire on crew
Introduction/purpose: The noise generated by artillery firing can have an extremely harmful effect on the people using it, namely the crew. The subject of this paper is the measurement and analysis of noise levels on artillery weapons used in the Serbian Army. Methods: The analysis and comparison of the results were carried out during operation of weapons of different calibers. Also, the aspect of impact and risk on the crew exposed to the mentioned physical phenomena was considered. Results: The results of the examination of the acoustic parameters in relation to the available criteria show that the crew on certain vehicles is exposed to a higher level of noise than allowed. Conclusion: It is concluded that all measured noise levels exceed the prescribed limit value. Based on the obtained results, further work can be done on reducing negative physical phenomena, as well as providing adequate equipment for the protection of the crew.
- 20 January 2025
- Published by University of Nis in Facta Universitatis, Series: Working and Living Environmental Protection
- p. 341-349
RECONNAISSANCE DRONE NOISE REVIEW
The paper analyzes the sound of drones, both as environmental noise and as a parameter for their detection. The reasons for the psychoacoustic character of the noise and the conditions for effective acoustic detection are examined. Comparative results of sound measurements are provided for three types of reconnaissance drones individually, while hovering at different altitudes.
- 20 January 2025
- Published by University of Nis in Facta Universitatis, Series: Working and Living Environmental Protection
- p. 341-349
RECONNAISSANCE DRONE NOISE REVIEW
The paper analyzes the sound of drones, both as environmental noise and as a parameter for their detection. The reasons for the psychoacoustic character of the noise and the conditions for effective acoustic detection are examined. Comparative results of sound measurements are provided for three types of reconnaissance drones individually, while hovering at different altitudes.