JHJingrui Han

Jingrui Han

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jingrui Han has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Bench-scale single-pulse x-ray diffraction based on a wire-shorted rod-pinch diode

    by Peizhou Zhang, Huantong Shi, Tongquan Wang, Mingjie Ye, Jingrui Han, Ming Xu, Jingyuan Xi, Jian Wu, Xingwen Li

    The flash x-ray source generated by a wire-shorted rod-pinch diode (WS-RPD) is characterized as a potential source for transient single-pulse x-ray diffraction (XRD) in dynamic experiments. Driven by a bench-scale pulsed power device, the WS-RPD generates intense x-rays with a ∼30 ns pulse width (full width at half maximum), and the probing energy can be conveniently adjusted by changing the anode material without modifying the load geometry or driving parameters. For copper and molybdenum anodes, the yield of K α photons exceeds 10 13 per shot in 4π sr. A polycapillary optic is adopted to further increase the probing photons and suppress the bremsstrahlung background, resulting in ∼10 8 probing photons impinging on a sample located 340 mm from the source and a signal-to-background ratio greater than ten (with a copper anode). The number of probing photons is much higher than the number reported for single-pulse XRD sources based on pulsed discharge, such as the x-pinch and vacuum-gap RPDs, and is comparable to an x-ray source produced by the interaction between a petawatt laser and a target.

  • Open Access

    Plasma dynamics of a wire-shorted rod-pinch diode for flash x-ray radiography

    by Peizhou Zhang, Huantong Shi, Dongsheng Wang, Ming Xu, Tongquan Wang, Jingrui Han, Zhiyuan Jiang, Jian Wu, Xingwen Li

    The rod-pinch diode (RPD) is one of the most iconic load configurations for flash x-ray radiography, which offers advantages of simple structure and high-quality x-ray spot. While physical models have been well-developed for the classic vacuum RPD since the 1970s, research remains lacking for its low-impedance variant using a metal wire to pre-short the anode–cathode gap, particularly on the plasma dynamics following electrical wire explosion (EWE) in the diode. The wire-shorted RPD features an operating impedance of <1 Ω, which is desirable on a high-current low-impedance pulse driver for high x-ray dose conversion. This work investigates the joint phenomenology from the plasma diagnostics, electrical measurements, and radiation detections of a wire-shorted RPD, offering a novel perspective on its plasma behaviors. Results from both experiment and magneto-hydrodynamic simulation show that the wire trailing mass persists throughout the x-ray emission phase, with only fractional mass adjacent to the anode pushed toward the rod tip. Unlike the micro diode at rod tip in a plasma-prefilled RPD, the much denser EWE plasma in a wire-shorted RPD forms an extended current return path prior to x-ray burst, and the electrons pinched at the rod tip are emitted from a large cathode area.