Chathurika Dassanayake
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chathurika Dassanayake has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Nuha Salim Mashaan
School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
9 shared publications - Daniel Oluwafemi Oguntayo
School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
2 shared publications - Adeel Iqbal
School of Engineering, Edith Cowan University (ECU), Joondalup, Perth, WA 6027, Australia
1 shared publication - Bea Lapiña Yaun
Mineral Recovery Research Centre (MRRC), School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia., Australia
1 shared publication - Ridmi Galagedara
School of Engineering, Edith Cowan University, Joondalup, WA 6027, Australia
1 shared publication - Suneth Sirinatha
School of Engineering, Edith Cowan University, 270 Joondalup Drv, Joondalup, WA 6027, Australia
1 shared publication
Latest Publications
- Open Access
Comparative Effects of Biochar, EVA, and Thermally Treated Bauxite Residue on Bitumen Performance, Rheology, and Short-Term Aging
The increasing demand for sustainable pavement materials has led to growing interest in alternative bitumen modifiers derived from industrial and biomass waste. This study compares the effects of biochar, ethylene-vinyl acetate (EVA), untreated bauxite residue (red mud), and thermally treated bauxite residue on the physical and rheological performance of C600 bitumen. Bauxite residue was tested in its untreated state and after thermal treatment at 350 °C and 600 °C to examine how thermal activation influences its modifying effect. The base bitumen and all modifiers were first characterised, and modified binders were then prepared at selected dosages using high-shear mixing. Performance was evaluated through penetration, softening point, rotational viscosity and short-term aging, and Dynamic Shear Rheometer (DSR) temperature sweeps were used to determine complex shear modulus (G*), phase angle (δ) and the rutting parameter (G*/sin δ) across a range of service temperatures. All modifiers increased binder stiffness and improved aging resistance while remaining within viscosity guideline. EVA produced the largest increase in viscosity and the greatest reduction in phase angle, giving the best rutting resistance at high temperatures. EVA and biochar both reduced the penetration reduction ratio to about 1% or less at their most effective dosages. Biochar at 10% gave the most consistent response across the three aging indices (PRR, SPIR and ΔPI), while bauxite residue treated at 600 °C reached the lowest softening point increment ratio at 30% dosage. The bauxite residue variants acted mainly as mineral fillers and produced a more moderate improvement, with thermal treatment showing only a limited additional benefit. The results establish relationships between modifier characteristics, thermal treatment and binder performance, and clarify the relative advantages and limitations of each modifier. These findings offer a comparative basis for selecting sustainable bitumen modifiers and provide foundational insights for the development of hybrid modifier systems combining these materials.
Open AccessComparative Effects of Biochar, EVA, and Thermally Treated Bauxite Residue on Bitumen Performance, Rheology, and Short-Term Aging
The increasing demand for sustainable pavement materials has led to growing interest in alternative bitumen modifiers derived from industrial and biomass waste. This study compares the effects of biochar, ethylene-vinyl acetate (EVA), untreated bauxite residue (red mud), and thermally treated bauxite residue on the physical and rheological performance of C600 bitumen. Bauxite residue was tested in its untreated state and after thermal treatment at 350 °C and 600 °C to examine how thermal activation influences its modifying effect. The base bitumen and all modifiers were first characterised, and modified binders were then prepared at selected dosages using high-shear mixing. Performance was evaluated through penetration, softening point, rotational viscosity and short-term aging, and Dynamic Shear Rheometer (DSR) temperature sweeps were used to determine complex shear modulus (G*), phase angle (δ) and the rutting parameter (G*/sin δ) across a range of service temperatures. All modifiers increased binder stiffness and improved aging resistance while remaining within viscosity guideline. EVA produced the largest increase in viscosity and the greatest reduction in phase angle, giving the best rutting resistance at high temperatures. EVA and biochar both reduced the penetration reduction ratio to about 1% or less at their most effective dosages. Biochar at 10% gave the most consistent response across the three aging indices (PRR, SPIR and ΔPI), while bauxite residue treated at 600 °C reached the lowest softening point increment ratio at 30% dosage. The bauxite residue variants acted mainly as mineral fillers and produced a more moderate improvement, with thermal treatment showing only a limited additional benefit. The results establish relationships between modifier characteristics, thermal treatment and binder performance, and clarify the relative advantages and limitations of each modifier. These findings offer a comparative basis for selecting sustainable bitumen modifiers and provide foundational insights for the development of hybrid modifier systems combining these materials.
- Open Access
Waste Material Utilization in Civil Engineering Applications: Advances, Challenges, and Future Directions—A Scoping Review
This PRISMA-guided scoping review examines the use of waste materials in civil engineering as a sustainable approach to reducing environmental impacts, conserving natural resources, and supporting circular economy principles. The rapid growth of urbanization, industrialization, mining, and agricultural activities generates large amounts of waste materials, including fly ash, ground granulated blast-furnace slag, bauxite residue, mining tailings, waste rock, acid-mine drainage sludge, waste plastics, post-consumer vulcanized rubber, recycled construction materials, and agricultural ashes. The disposal of these materials often creates serious environmental and land-use problems, making their reuse increasingly important. In this context, civil engineering is one of the most promising sectors for large-scale waste valorization because of its high material demand and its ability to use different waste streams into practical applications such as concrete and cementitious systems, pavement and asphalt engineering, geotechnical works, and other infrastructure sectors. This review critically evaluates the global availability, material characteristics, engineering applications, environmental and economic benefits, recent advances, and key challenges related to major industrial, mining, agricultural, polymeric, and construction-derived wastes. Although significant progress has been made in this field, wider implementation is still limited by variations in material properties, technical and environmental challenges, economic constraints, and limited field validation of long-term performance. By bringing together current knowledge from different waste streams and civil engineering sectors, this review highlights important research gaps and future directions to support more sustainable, resilient, and resource-efficient infrastructure development. The effective use of waste materials in civil engineering can play an important role in reducing carbon emissions, improving resource efficiency, and supporting global sustainability.
Open AccessWaste Material Utilization in Civil Engineering Applications: Advances, Challenges, and Future Directions—A Scoping Review
This PRISMA-guided scoping review examines the use of waste materials in civil engineering as a sustainable approach to reducing environmental impacts, conserving natural resources, and supporting circular economy principles. The rapid growth of urbanization, industrialization, mining, and agricultural activities generates large amounts of waste materials, including fly ash, ground granulated blast-furnace slag, bauxite residue, mining tailings, waste rock, acid-mine drainage sludge, waste plastics, post-consumer vulcanized rubber, recycled construction materials, and agricultural ashes. The disposal of these materials often creates serious environmental and land-use problems, making their reuse increasingly important. In this context, civil engineering is one of the most promising sectors for large-scale waste valorization because of its high material demand and its ability to use different waste streams into practical applications such as concrete and cementitious systems, pavement and asphalt engineering, geotechnical works, and other infrastructure sectors. This review critically evaluates the global availability, material characteristics, engineering applications, environmental and economic benefits, recent advances, and key challenges related to major industrial, mining, agricultural, polymeric, and construction-derived wastes. Although significant progress has been made in this field, wider implementation is still limited by variations in material properties, technical and environmental challenges, economic constraints, and limited field validation of long-term performance. By bringing together current knowledge from different waste streams and civil engineering sectors, this review highlights important research gaps and future directions to support more sustainable, resilient, and resource-efficient infrastructure development. The effective use of waste materials in civil engineering can play an important role in reducing carbon emissions, improving resource efficiency, and supporting global sustainability.
- Open Access
- 23 June 2026
- Published by MDPI AG in Journal of Experimental and Theoretical Analyses
- Vol. 4 (3) , 23
Physical and Rheological Properties of Bitumen Modified with Biochar
The integration of biochar into asphalt binders represents a significant advancement toward global sustainability in pavement engineering. Produced through biomass pyrolysis, biochar enables the valorization of agricultural and industrial waste while reducing dependence on petroleum-derived binder constituents. This review critically synthesizes current research regarding the impact of biochar on the physical, rheological, and aging performance of bitumen. The evidence consistently shows that biochar improves binder stiffness, raises softening points, and strengthens rutting resistance at elevated temperatures, largely due to its porous microstructure and high carbon content. Biochar-modified binders also exhibit enhanced aging resistance through the adsorption of volatile light fractions. These improvements are primarily ascribed to the carbonaceous composition and high porosity of the biochar particles. However, systemic challenges, including phase stability at high concentrations, long-term oxidative aging, and a lack of standardized characterization protocols, hinder widespread implementation. By identifying consistent findings, contradictions, and critical research gaps across the literature, this review provides a consolidated foundation to guide the transition of biochar-modified bitumen from laboratory investigation to large-scale pavement infrastructure applications.
- 23 June 2026
- Published by MDPI AG in Journal of Experimental and Theoretical Analyses
- Vol. 4 (3) , 23
Open AccessPhysical and Rheological Properties of Bitumen Modified with Biochar
The integration of biochar into asphalt binders represents a significant advancement toward global sustainability in pavement engineering. Produced through biomass pyrolysis, biochar enables the valorization of agricultural and industrial waste while reducing dependence on petroleum-derived binder constituents. This review critically synthesizes current research regarding the impact of biochar on the physical, rheological, and aging performance of bitumen. The evidence consistently shows that biochar improves binder stiffness, raises softening points, and strengthens rutting resistance at elevated temperatures, largely due to its porous microstructure and high carbon content. Biochar-modified binders also exhibit enhanced aging resistance through the adsorption of volatile light fractions. These improvements are primarily ascribed to the carbonaceous composition and high porosity of the biochar particles. However, systemic challenges, including phase stability at high concentrations, long-term oxidative aging, and a lack of standardized characterization protocols, hinder widespread implementation. By identifying consistent findings, contradictions, and critical research gaps across the literature, this review provides a consolidated foundation to guide the transition of biochar-modified bitumen from laboratory investigation to large-scale pavement infrastructure applications.
- Top Cited PapersOpen Access
- 29 January 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (3) , 1361
Mining Waste as a Resource in Construction: Applications, Benefits, and Challenges
Mining activities generate vast quantities of waste each year, including mine tailings, bauxite residue, waste rock, and various metallurgical slags. Although these materials have traditionally been regarded as environmental liabilities, many possess physical and chemical properties that make them promising candidates for use in construction. This review synthesizes recent research on the utilization of major mining waste streams, with particular emphasis on pavement applications and other construction materials. The findings indicate that bauxite residue exhibits both pozzolanic and filler characteristics, demonstrating potential in asphalt mastics, asphalt mixtures, and other construction products. Nonetheless, its widespread adoption is constrained by issues such as high alkalinity, leaching risks, and concerns related to naturally occurring radioactivity. Mine tailings can be a substitute for fine aggregates and cement in a range of mixtures, though challenges, including pronounced material variability and environmental risks, persist. Waste rock offers favorable geotechnical properties for use in road bases and embankments, while metallurgical slags (e.g., copper, nickel, and lithium slags) provide functional pozzolanic activity and suitable aggregate qualities. Across all waste types, their incorporation into construction materials can conserve natural resources, reduce material costs, and support circular-economy and low-carbon development objectives. However, progress remains contingent upon advancements in material standards, pretreatment technologies, environmental protection measures, and large-scale field validation. Overall, this review underscores both the significant potential and the practical challenges associated with transforming mining waste into valuable and sustainable construction resources.
- 29 January 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (3) , 1361
Top Cited PapersOpen AccessMining Waste as a Resource in Construction: Applications, Benefits, and Challenges
Mining activities generate vast quantities of waste each year, including mine tailings, bauxite residue, waste rock, and various metallurgical slags. Although these materials have traditionally been regarded as environmental liabilities, many possess physical and chemical properties that make them promising candidates for use in construction. This review synthesizes recent research on the utilization of major mining waste streams, with particular emphasis on pavement applications and other construction materials. The findings indicate that bauxite residue exhibits both pozzolanic and filler characteristics, demonstrating potential in asphalt mastics, asphalt mixtures, and other construction products. Nonetheless, its widespread adoption is constrained by issues such as high alkalinity, leaching risks, and concerns related to naturally occurring radioactivity. Mine tailings can be a substitute for fine aggregates and cement in a range of mixtures, though challenges, including pronounced material variability and environmental risks, persist. Waste rock offers favorable geotechnical properties for use in road bases and embankments, while metallurgical slags (e.g., copper, nickel, and lithium slags) provide functional pozzolanic activity and suitable aggregate qualities. Across all waste types, their incorporation into construction materials can conserve natural resources, reduce material costs, and support circular-economy and low-carbon development objectives. However, progress remains contingent upon advancements in material standards, pretreatment technologies, environmental protection measures, and large-scale field validation. Overall, this review underscores both the significant potential and the practical challenges associated with transforming mining waste into valuable and sustainable construction resources.
- Open Access
- 19 December 2025
- Published by MDPI AG in Preprints.org
Mining Waste as a Resource in Construction: Applications, Benefits, and Challenges
Mining activities generate vast quantities of waste each year, including mine tailings, bauxite residue, waste rock, and various metallurgical slags. Although these materials have traditionally been regarded as environmental liabilities, many possess physical and chemical properties that make them promising candidates for use in construction. This review synthesizes recent research on the utilization of major mining waste streams, with particular emphasis on pavement applications and other construction materials. The findings indicate that bauxite residue exhibits both pozzolanic and filler characteristics, demonstrating potential in asphalt mastics, asphalt mixtures, and other construction products. Nonetheless, its widespread adoption is constrained by issues such as high alkalinity, leaching risks, and concerns related to naturally occurring radioactivity. Mine tailings can substitute for fine aggregates and cement in a range of mixtures, though challenges including pronounced material variability and environmental risks persist. Waste rock offers favourable geotechnical properties for use in road bases and embankments, while metallurgical slags (e.g., copper, nickel, and lithium slags) provide functional pozzolanic activity and suitable aggregate qualities. Across all waste types, their incorporation into construction materials can conserve natural resources, reduce material costs, and support circular-economy and low-carbon development objectives. However, progress remains contingent upon advancements in material standards, pretreatment technologies, environmental protection measures, and large-scale field validation. Overall, this review underscores both the significant potential and the practical challenges associated with transforming mining waste into valuable and sustainable construction resources.
- 19 December 2025
- Published by MDPI AG in Preprints.org
Open AccessMining Waste as a Resource in Construction: Applications, Benefits, and Challenges
Mining activities generate vast quantities of waste each year, including mine tailings, bauxite residue, waste rock, and various metallurgical slags. Although these materials have traditionally been regarded as environmental liabilities, many possess physical and chemical properties that make them promising candidates for use in construction. This review synthesizes recent research on the utilization of major mining waste streams, with particular emphasis on pavement applications and other construction materials. The findings indicate that bauxite residue exhibits both pozzolanic and filler characteristics, demonstrating potential in asphalt mastics, asphalt mixtures, and other construction products. Nonetheless, its widespread adoption is constrained by issues such as high alkalinity, leaching risks, and concerns related to naturally occurring radioactivity. Mine tailings can substitute for fine aggregates and cement in a range of mixtures, though challenges including pronounced material variability and environmental risks persist. Waste rock offers favourable geotechnical properties for use in road bases and embankments, while metallurgical slags (e.g., copper, nickel, and lithium slags) provide functional pozzolanic activity and suitable aggregate qualities. Across all waste types, their incorporation into construction materials can conserve natural resources, reduce material costs, and support circular-economy and low-carbon development objectives. However, progress remains contingent upon advancements in material standards, pretreatment technologies, environmental protection measures, and large-scale field validation. Overall, this review underscores both the significant potential and the practical challenges associated with transforming mining waste into valuable and sustainable construction resources.
- Open Access
Biochar as Additive and Modifier in Bitumen and Asphalt Mixtures
Incorporating biochar into pavement materials is a novel and environmentally sustainable approach that aligns with global sustainability goals and advances greener pavement technologies. Studies have shown that biochar significantly enhances the strength, durability, and stability of pavements, while also contributing to sustainability by lowering the carbon footprint associated with traditional construction materials. Additionally, the incorporation of biochar contributes to the sustainability of asphalt engineering by reducing reliance on petroleum-based products and promoting the valorization of biomass. The primary objective of this review is to critically evaluate and synthesize existing research on the use of biochar in bitumen and asphalt mixtures, identifying key performance trends, influencing factors, and optimum modification conditions. Despite these benefits, several drawbacks and challenges remain. These include variability in biochar properties, determining the optimal dosage for different applications, and the lack of standardized testing methods. This review investigates a wide range of studies and experimental investigations that evaluate the sources and production methods of biochar, as well as its effects on bitumen binders and asphalt mixtures. Furthermore, the paper highlights the environmental consideration of biochar modification, including carbon sequestration and Life cycle assessment. Substantial findings and their engineering implications are presented, along with recommendations for future research aimed at advancing the broader adoption of biochar in sustainable pavement engineering, in alignment with the principles of the circular economy.
Open AccessBiochar as Additive and Modifier in Bitumen and Asphalt Mixtures
Incorporating biochar into pavement materials is a novel and environmentally sustainable approach that aligns with global sustainability goals and advances greener pavement technologies. Studies have shown that biochar significantly enhances the strength, durability, and stability of pavements, while also contributing to sustainability by lowering the carbon footprint associated with traditional construction materials. Additionally, the incorporation of biochar contributes to the sustainability of asphalt engineering by reducing reliance on petroleum-based products and promoting the valorization of biomass. The primary objective of this review is to critically evaluate and synthesize existing research on the use of biochar in bitumen and asphalt mixtures, identifying key performance trends, influencing factors, and optimum modification conditions. Despite these benefits, several drawbacks and challenges remain. These include variability in biochar properties, determining the optimal dosage for different applications, and the lack of standardized testing methods. This review investigates a wide range of studies and experimental investigations that evaluate the sources and production methods of biochar, as well as its effects on bitumen binders and asphalt mixtures. Furthermore, the paper highlights the environmental consideration of biochar modification, including carbon sequestration and Life cycle assessment. Substantial findings and their engineering implications are presented, along with recommendations for future research aimed at advancing the broader adoption of biochar in sustainable pavement engineering, in alignment with the principles of the circular economy.
- Open Access
- 7 July 2025
- Published by MDPI AG in Preprints.org
Performance and Sustainability of Lithium Slag as a Supplementary Cementitious Material: A Review
The growing demand for lithium usage expands lithium production, and the volume of waste generation continues to rise accordingly. The improper disposal of mining waste leads to serious environmental and health issues, underscoring the necessity of effective management and reuse of mining waste. Accordingly, researchers are evaluating the potential use of lithium waste, and as a result, the identification of Lithium slag (LS) as a promising supplementary cementitious material (SCM) is being actively pursued. The strategy is a response to dual challenges, the sustainable solution for lithium waste and substitution for Ordinary Portland Cement, which is contributing 8% of global CO₂ emissions during their production. This review evaluates LS-blended concrete performance, focusing on dosage, mix designs, strength, and durability based on previous studies. Substituting 20–30% of cement with LS enhances strength, lowers shrinkage and permeability, and refines microstructure through denser C–S–H and stronger ITZ. LS-modified concretes resist sulphate, acid, freeze-thaw, and thermal damage. Life cycle and techno-economic assessments show up to 30% reductions in embodied carbon and energy use, with potential cost savings due to LS's industrial waste status. LS also works well with recycled aggregates and alkali-activated systems. These findings confirm LS as a viable and sustainable SCM, supporting circular economic goals.
- 7 July 2025
- Published by MDPI AG in Preprints.org
Open AccessPerformance and Sustainability of Lithium Slag as a Supplementary Cementitious Material: A Review
The growing demand for lithium usage expands lithium production, and the volume of waste generation continues to rise accordingly. The improper disposal of mining waste leads to serious environmental and health issues, underscoring the necessity of effective management and reuse of mining waste. Accordingly, researchers are evaluating the potential use of lithium waste, and as a result, the identification of Lithium slag (LS) as a promising supplementary cementitious material (SCM) is being actively pursued. The strategy is a response to dual challenges, the sustainable solution for lithium waste and substitution for Ordinary Portland Cement, which is contributing 8% of global CO₂ emissions during their production. This review evaluates LS-blended concrete performance, focusing on dosage, mix designs, strength, and durability based on previous studies. Substituting 20–30% of cement with LS enhances strength, lowers shrinkage and permeability, and refines microstructure through denser C–S–H and stronger ITZ. LS-modified concretes resist sulphate, acid, freeze-thaw, and thermal damage. Life cycle and techno-economic assessments show up to 30% reductions in embodied carbon and energy use, with potential cost savings due to LS's industrial waste status. LS also works well with recycled aggregates and alkali-activated systems. These findings confirm LS as a viable and sustainable SCM, supporting circular economic goals.
- Top Cited PapersOpen Access
Rutting and Aging Properties of Recycled Polymer-Modified Pavement Materials
Recycled polymer-modified binders have emerged as a sustainable solution for improving the performance and durability of pavement materials. This review examines the rutting and aging properties of pavements modified with recycled polymers, highlighting their potential for sustainable infrastructure development. The incorporation of recycled polymers into bitumen enhances resistance to rutting and aging by improving the binder’s mechanical stability and oxidative durability. Key laboratory techniques, including the rolling thin-film oven test (RTFOT) and the pressure aging vessel (PAV), are evaluated for their effectiveness in assessing the thermal and oxidative aging behavior of modified binders. The review demonstrates that recycled polymers improve binder elasticity, delay oxidative degradation, and mitigate deformation under repeated loading, thus extending pavement lifespan and reducing maintenance costs. However, challenges such as optimizing polymer dosage, ensuring homogeneity, and predicting long-term performance require further investigation. This paper underscores the environmental and economic benefits of utilizing recycled polymers in pavement construction and advocates for improved testing protocols and advanced characterization techniques to enhance the reliability and sustainability of polymer-modified pavements.
Top Cited PapersOpen AccessRutting and Aging Properties of Recycled Polymer-Modified Pavement Materials
Recycled polymer-modified binders have emerged as a sustainable solution for improving the performance and durability of pavement materials. This review examines the rutting and aging properties of pavements modified with recycled polymers, highlighting their potential for sustainable infrastructure development. The incorporation of recycled polymers into bitumen enhances resistance to rutting and aging by improving the binder’s mechanical stability and oxidative durability. Key laboratory techniques, including the rolling thin-film oven test (RTFOT) and the pressure aging vessel (PAV), are evaluated for their effectiveness in assessing the thermal and oxidative aging behavior of modified binders. The review demonstrates that recycled polymers improve binder elasticity, delay oxidative degradation, and mitigate deformation under repeated loading, thus extending pavement lifespan and reducing maintenance costs. However, challenges such as optimizing polymer dosage, ensuring homogeneity, and predicting long-term performance require further investigation. This paper underscores the environmental and economic benefits of utilizing recycled polymers in pavement construction and advocates for improved testing protocols and advanced characterization techniques to enhance the reliability and sustainability of polymer-modified pavements.
- Open Access
- 18 February 2025
- Published by MDPI AG in Preprints.org
Rutting and Aging Properties of Recycled Polymer Modified Pavement Materials
Recycled polymer-modified binders have emerged as a sustainable solution for improving the performance and durability of pavement materials. This review examines the rutting and aging properties of pavements modified with recycled polymers, highlighting their potential for sus-tainable infrastructure development. The incorporation of recycled polymers into bitumen en-hances resistance to rutting and aging by improving the binder's mechanical stability and oxida-tive durability. Key laboratory techniques, including the Rolling Thin Film Oven Test (RTFOT) and Pressure Aging Vessel (PAV), are evaluated for their effectiveness in assessing the thermal and oxidative aging behavior of modified binders. The review demonstrates that recycled poly-mers improve binder elasticity, delay oxidative degradation, and mitigate deformation under repeated loading, thus extending pavement lifespan and reducing maintenance costs. However, challenges such as optimizing polymer dosage, ensuring homogeneity, and predicting long-term performance require further investigation. This paper underscores the environmental and eco-nomic benefits of utilizing recycled polymers in pavement construction and advocates for im-proved testing protocols and advanced characterization techniques to enhance the reliability and sustainability of polymer-modified pavements.
- 18 February 2025
- Published by MDPI AG in Preprints.org
Open AccessRutting and Aging Properties of Recycled Polymer Modified Pavement Materials
Recycled polymer-modified binders have emerged as a sustainable solution for improving the performance and durability of pavement materials. This review examines the rutting and aging properties of pavements modified with recycled polymers, highlighting their potential for sus-tainable infrastructure development. The incorporation of recycled polymers into bitumen en-hances resistance to rutting and aging by improving the binder's mechanical stability and oxida-tive durability. Key laboratory techniques, including the Rolling Thin Film Oven Test (RTFOT) and Pressure Aging Vessel (PAV), are evaluated for their effectiveness in assessing the thermal and oxidative aging behavior of modified binders. The review demonstrates that recycled poly-mers improve binder elasticity, delay oxidative degradation, and mitigate deformation under repeated loading, thus extending pavement lifespan and reducing maintenance costs. However, challenges such as optimizing polymer dosage, ensuring homogeneity, and predicting long-term performance require further investigation. This paper underscores the environmental and eco-nomic benefits of utilizing recycled polymers in pavement construction and advocates for im-proved testing protocols and advanced characterization techniques to enhance the reliability and sustainability of polymer-modified pavements.