AIAdeel Iqbal

Adeel Iqbal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Adeel Iqbal has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluating ECHO2 Biochar as Sustainable Bitumen Binder Modifier in Road Pavements: High-Temperature Performance Characterisation

    by Adeel Iqbal, Nuha S. Mashaan, Themelina Paraskeva, Mohamed A. Shahin

    The incorporation of bio-derived modifiers in bitumen binders presents a practical pathway toward sustainable, carbon-sequestering road pavement infrastructure. This study evaluates commercially produced ECHO2 softwood biochar as a modifier for Australian viscosity-graded C170 bitumen, combining microstructural, thermal, physical, and rheological characterization to assess its suitability as a high-temperature reinforcing modifier. In this study, biochar was incorporated at 3%, 6%, 9%, and 12% by weight, utilizing particles smaller than 75 µm to maximize interfacial interaction. Characterization via SEM-EDS, XRD, and TGA revealed a highly stable, carbon-rich, amorphous material with a rough, porous morphology, favourable for physical interlocking with the bitumen matrix. Physical and rheological investigations demonstrated that ECHO2 biochar measurably enhances binder stiffness and high-temperature deformation resistance. Compared with the control, 12% biochar modification reduced penetration by approximately 27% and increased the softening point by approximately 10%, indicating a reduction in temperature susceptibility. Dynamic shear rheometer (DSR) temperature sweeps highlighted substantial increases in the complex shear modulus (G*) and rutting factor (G*/sinδ) without altering the phase angle (δ), confirming the modifier acts as a rigid, particulate reinforcing agent rather than an elastomer. Multiple stress creep recovery (MSCR) testing supported these findings; non-recoverable creep compliance (Jnr) decreased progressively. Critically, under the AASHTO M 332 specification, while the neat bitumen binder barely met the standard traffic (S) criteria, the progressive reduction in Jnr (particularly at 12%) delivered a substantially higher factor of safety against rutting within the standard traffic designation. Finally, ECHO2 biochar demonstrates strong potential as a sustainable modifier that restricts viscous flow through particulate stiffening, enhancing high-temperature rutting resistance at elevated temperatures.


  • Open Access

    Biochar Waste as a Sustainable Modifier for Bitumen Binder Reinforcement: A Review

    by Nuha Mashaan, Taranjeet Singh, Ankitkumar Asodariya, Adeel Iqbal

    There is even more pressure on the global construction industry to improve its sustainability whilst striving to meet the performance standards of the infrastructure. The pyrolysis of biomass has produced one of the carbon-rich products, biochar, which has been identified as a potential source of modifier to bitumen asphalt binder. This is a review that is an integration of the current research on the use of biochar waste in bitumen reinforcement and the impacts it has on the physical properties, rheological behaviour, resistance to aging, and advantages it has on the environment. Discussion 43 literature shows that adding the optimal quantity of biochar raises the rigidity, thermal stability, and rutting resistance of the binder up to the industry standards. Biochar could also be considered a product satisfying the principles of the circular economy in infrastructure construction and a means of waste management alongside a performance-enhancing substance. Experiments in the laboratory indicate that biochemical char-modified binders possess better sustainability qualifications and also have an equivalent or better rate of working compared to their traditional counterparts in synthetic modifiers. Nonetheless, to achieve effective industrialisation, consideration must be given to the economic constraints; it is essential to establish protocols about standardization, and extensive validation in field studies ought to be done.


  • Open Access

    Mining Waste in Asphalt Pavements: A Critical Review of Waste Rock and Tailings Applications

    by Adeel Iqbal, Nuha S. Mashaan, Themelina Paraskeva

    This paper presents a critical and comprehensive review of the application of mining waste, specifically waste rock and tailings, in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance-based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain, particularly in relation to long-term durability, comprehensive environmental and economic Life-Cycle Assessments (LCA), and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation.


  • Open Access

    Performance and Sustainability of Lithium Slag as a Supplementary Cementitious Material: A Review

    by Nuha S Mashaan, Chathurika Dassanayake, Bea Lapiña Yaun, Adeel Iqbal

    The growing demand for lithium usage expands lithium production, and the volume of waste generation continues to rise accordingly. The improper disposal of mining waste leads to serious environmental and health issues, underscoring the necessity of effective management and reuse of mining waste. Accordingly, researchers are evaluating the potential use of lithium waste, and as a result, the identification of Lithium slag (LS) as a promising supplementary cementitious material (SCM) is being actively pursued. The strategy is a response to dual challenges, the sustainable solution for lithium waste and substitution for Ordinary Portland Cement, which is contributing 8% of global CO₂ emissions during their production. This review evaluates LS-blended concrete performance, focusing on dosage, mix designs, strength, and durability based on previous studies. Substituting 20–30% of cement with LS enhances strength, lowers shrinkage and permeability, and refines microstructure through denser C–S–H and stronger ITZ. LS-modified concretes resist sulphate, acid, freeze-thaw, and thermal damage. Life cycle and techno-economic assessments show up to 30% reductions in embodied carbon and energy use, with potential cost savings due to LS's industrial waste status. LS also works well with recycled aggregates and alkali-activated systems. These findings confirm LS as a viable and sustainable SCM, supporting circular economic goals.

  • Open Access

    Mining Waste in Asphalt Pavements: A Critical Review of Waste Rocks and Tailings Applications

    by Adeel Iqbal, Nuha S Mashaan, Themelina Paraskeva

    This paper presents a critical and comprehensive review of the application of mining waste specifically waste rock and tailings in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain particularly in relation to long-term durability, comprehensive environmental and economic life-cycle assessments, and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation.