Hongyi Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hongyi Liang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jiang Meng
School of Petroleum Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
3 shared publications - Xueyuan Long
School of Petroleum Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
3 shared publications - Quan Wu
College of Petroleum and Natural Gas Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
2 shared publications - Xin Li
College of Petroleum and Natural Gas Engineering, Chongqing University of Science and Technology, Chongqing 401331, China
2 shared publications - De Tang
Chongqing Xiangguo Temple Gas Storage Co., Ltd., Chongqing 401120, China
1 shared publication - Guicheng Yu
Chongqing Xiangguo Temple Gas Storage Co., Ltd., Chongqing 401120, China
1 shared publication
Latest Publications
- Open Access
Optimization of a Concentric-Ring Rotating Packed Bed for Enhanced Offshore Natural Gas Dehydration
Facing the harsh offshore environment characterized by severe space constraints and continuous platform motion, this study develops an optimized rotating packed bed (RPB) for compact and robust triethylene glycol dehydration. Through integrated experimental and computational investigation, the concentric-ring rotor was identified as superior among four configurations, consistently achieving dehydration equilibrium above 80% under lean TEG conditions. CFD analysis revealed its fundamental mechanism: synergistic matching between the centrifugal force field and annular flow paths yields the most uniform liquid distribution. This enabled the establishment of a strong predictive correlation (R2 = 0.935) between simulated liquid uniformity and experimental dehydration performance. Guided by flow field diagnostics, targeted structural optimizations increased dehydration equilibrium from 86.1% to 92.25% while reducing system pressure drop by 73%. Parametric studies defined an optimal operating envelope at a gas-to-liquid ratio of 60:1 and system pressure of 2 MPa, achieving peak efficiency of 96.42% with robust performance across 50–150% load variations. This work demonstrates a simulation-guided pathway for intensifying separation processes, providing a validated framework for designing marine-adapted dehydration technology.
Open AccessOptimization of a Concentric-Ring Rotating Packed Bed for Enhanced Offshore Natural Gas Dehydration
Facing the harsh offshore environment characterized by severe space constraints and continuous platform motion, this study develops an optimized rotating packed bed (RPB) for compact and robust triethylene glycol dehydration. Through integrated experimental and computational investigation, the concentric-ring rotor was identified as superior among four configurations, consistently achieving dehydration equilibrium above 80% under lean TEG conditions. CFD analysis revealed its fundamental mechanism: synergistic matching between the centrifugal force field and annular flow paths yields the most uniform liquid distribution. This enabled the establishment of a strong predictive correlation (R2 = 0.935) between simulated liquid uniformity and experimental dehydration performance. Guided by flow field diagnostics, targeted structural optimizations increased dehydration equilibrium from 86.1% to 92.25% while reducing system pressure drop by 73%. Parametric studies defined an optimal operating envelope at a gas-to-liquid ratio of 60:1 and system pressure of 2 MPa, achieving peak efficiency of 96.42% with robust performance across 50–150% load variations. This work demonstrates a simulation-guided pathway for intensifying separation processes, providing a validated framework for designing marine-adapted dehydration technology.
- Open Access
Optimization of Triazine Desulfurization Injection Rate and Injection Process for the Xiangguosi Underground Gas Storage
Triazine solvent desulfurization is a highly efficient technology for removing hydrogen sulfide from natural gas. In this study, we used ASPEN HYSYS V11 with the Peng-Robinson (PR) equation to investigate the triazine consumption under different natural gas flow rates and hydrogen sulfide concentrations, as well as the sulfur capacity resulting from the reaction between triazine and H2S at varying solution concentrations. Additionally, CFD simulations were employed to optimize the injection process of the triazine solvent by examining four key factors: gas flow velocity, injection volume, injection angle, and injection method. The results indicate that the required triazine dosage follows an exponential model, with a margin of error within 10%. A triazine mass fraction between 0.4 and 0.6 was found to be optimal. Among the factors studied, gas flow velocity has the most significant influence on desulfurization efficiency, while the injection rate plays a secondary role. An injection angle of 45° proved most effective, and the use of dual vertical symmetric nozzles achieved more uniform mixing between the natural gas and triazine solvent.
Open AccessOptimization of Triazine Desulfurization Injection Rate and Injection Process for the Xiangguosi Underground Gas Storage
Triazine solvent desulfurization is a highly efficient technology for removing hydrogen sulfide from natural gas. In this study, we used ASPEN HYSYS V11 with the Peng-Robinson (PR) equation to investigate the triazine consumption under different natural gas flow rates and hydrogen sulfide concentrations, as well as the sulfur capacity resulting from the reaction between triazine and H2S at varying solution concentrations. Additionally, CFD simulations were employed to optimize the injection process of the triazine solvent by examining four key factors: gas flow velocity, injection volume, injection angle, and injection method. The results indicate that the required triazine dosage follows an exponential model, with a margin of error within 10%. A triazine mass fraction between 0.4 and 0.6 was found to be optimal. Among the factors studied, gas flow velocity has the most significant influence on desulfurization efficiency, while the injection rate plays a secondary role. An injection angle of 45° proved most effective, and the use of dual vertical symmetric nozzles achieved more uniform mixing between the natural gas and triazine solvent.
- Open Access
Investigation of the Factors and Mechanisms Affecting the Foaming of Triethylene Glycol in Natural Gas Purification
With increasing natural gas processing demands, triethylene glycol (TEG) in dehydration systems becomes contaminated by gas-carried impurities, leading to problematic foaming, degradation, and significant glycol losses that compromise operational economics, pipeline integrity, and product quality. To systematically investigate impurity effects, we conducted comprehensive single-factor TEG regeneration experiments simulating field conditions. Through precise measurements of foaming height, defoaming time, and interfacial tension, we established clear correlations between impurity types and TEG foaming characteristics. Our results demonstrate a distinct hierarchy of foaming influence: chemical additives > solid impurities > water-soluble inorganic salts > MDEA > hydrogen sulfide > hydrocarbons. Chemical additives showed the most pronounced effect on surface tension, reducing it to 31.1 mN/m at 1500 mg/L. Water-soluble inorganic salts affected foaming through combined decomposition and crystalline morphology effects, ranked as MgCl2 > NaHCO3 > KCl > NaCl > Na2SO4 > CaCl2 (MgCl2 achieving 33.8 mN/m at 2000 mg/L). Solid impurity impacts correlated strongly with particle morphology (CaCO3 > Fe2O3 > CaSO4 > ZnO > CuO > Al2O3 > FeS), stabilizing at 1.5 mg/L. Hydrocarbons showed negligible influence, while hydrogen sulfide and MDEA caused only minor surface tension reductions with limited foaming effects. Based on these findings, we propose targeted mitigation strategies for industrial implementation.
Open AccessInvestigation of the Factors and Mechanisms Affecting the Foaming of Triethylene Glycol in Natural Gas Purification
With increasing natural gas processing demands, triethylene glycol (TEG) in dehydration systems becomes contaminated by gas-carried impurities, leading to problematic foaming, degradation, and significant glycol losses that compromise operational economics, pipeline integrity, and product quality. To systematically investigate impurity effects, we conducted comprehensive single-factor TEG regeneration experiments simulating field conditions. Through precise measurements of foaming height, defoaming time, and interfacial tension, we established clear correlations between impurity types and TEG foaming characteristics. Our results demonstrate a distinct hierarchy of foaming influence: chemical additives > solid impurities > water-soluble inorganic salts > MDEA > hydrogen sulfide > hydrocarbons. Chemical additives showed the most pronounced effect on surface tension, reducing it to 31.1 mN/m at 1500 mg/L. Water-soluble inorganic salts affected foaming through combined decomposition and crystalline morphology effects, ranked as MgCl2 > NaHCO3 > KCl > NaCl > Na2SO4 > CaCl2 (MgCl2 achieving 33.8 mN/m at 2000 mg/L). Solid impurity impacts correlated strongly with particle morphology (CaCO3 > Fe2O3 > CaSO4 > ZnO > CuO > Al2O3 > FeS), stabilizing at 1.5 mg/L. Hydrocarbons showed negligible influence, while hydrogen sulfide and MDEA caused only minor surface tension reductions with limited foaming effects. Based on these findings, we propose targeted mitigation strategies for industrial implementation.
- Open Access
- 3 March 2025
- Published by MDPI AG in Preprints.org
Investigation on the Factors and Mechanisms Affecting the Foaming of Triethylene Glycol in Natural Gas Purification
As the processing capacity of natural gas purification plants increases, the dehydration of triethylene glycol is affected by gas impurities, resulting in problems such as foaming, deterioration, and increased losses, which affect production costs, pipeline safety, and gas quality. Determine the on-site components of triethylene glycol, conduct simulated regeneration single-factor experiments to explore the influence of impurities, measure foaming performance and interfacial tension, and study the effects of various factors on the foaming performance of triethylene glycol. The experiment shows that water-soluble inorganic salts, solid impurities, etc. have different effects on the properties of triethylene glycol, while hydrocarbons have little effect. The ranking of the impact on foaming performance is: chemical additives>solid impurities>water-soluble inorganic salts>MDEA>hydrogen sulfide>hydrocarbons. The self decomposition and crystal morphology of water-soluble inorganic salts affect the foaming performance, in the order of MgCl₂>NaHCO3>KCl>NaCl>Na₂SO₄>CaCl₂; The morphology of solid impurities affects foaming performance, in the order of CaCO3>Fe₂O3>CaSO₄>ZnO>CuO>Al₂O3>FeS; Corrosion inhibitors and foam inhibitors containing surfactants are prone to foaming; Hydrocarbons have almost no impact, while hydrogen sulfide and MDEA have the least impact. Natural gas purification plants need to strictly control the content of chemical additives, solid impurities, and water-soluble inorganic salts.
- 3 March 2025
- Published by MDPI AG in Preprints.org
Open AccessInvestigation on the Factors and Mechanisms Affecting the Foaming of Triethylene Glycol in Natural Gas Purification
As the processing capacity of natural gas purification plants increases, the dehydration of triethylene glycol is affected by gas impurities, resulting in problems such as foaming, deterioration, and increased losses, which affect production costs, pipeline safety, and gas quality. Determine the on-site components of triethylene glycol, conduct simulated regeneration single-factor experiments to explore the influence of impurities, measure foaming performance and interfacial tension, and study the effects of various factors on the foaming performance of triethylene glycol. The experiment shows that water-soluble inorganic salts, solid impurities, etc. have different effects on the properties of triethylene glycol, while hydrocarbons have little effect. The ranking of the impact on foaming performance is: chemical additives>solid impurities>water-soluble inorganic salts>MDEA>hydrogen sulfide>hydrocarbons. The self decomposition and crystal morphology of water-soluble inorganic salts affect the foaming performance, in the order of MgCl₂>NaHCO3>KCl>NaCl>Na₂SO₄>CaCl₂; The morphology of solid impurities affects foaming performance, in the order of CaCO3>Fe₂O3>CaSO₄>ZnO>CuO>Al₂O3>FeS; Corrosion inhibitors and foam inhibitors containing surfactants are prone to foaming; Hydrocarbons have almost no impact, while hydrogen sulfide and MDEA have the least impact. Natural gas purification plants need to strictly control the content of chemical additives, solid impurities, and water-soluble inorganic salts.