Optimization of Triazine Desulfurization Injection Rate and Injection Process for the Xiangguosi Underground Gas Storage
Open Access
Abstract
Triazine solvent desulfurization is a highly efficient technology for removing hydrogen sulfide from natural gas. In this study, we used ASPEN HYSYS V11 with the Peng-Robinson (PR) equation to investigate the triazine consumption under different natural gas flow rates and hydrogen sulfide concentrations, as well as the sulfur capacity resulting from the reaction between triazine and H2S at varying solution concentrations. Additionally, CFD simulations were employed to optimize the injection process of the triazine solvent by examining four key factors: gas flow velocity, injection volume, injection angle, and injection method. The results indicate that the required triazine dosage follows an exponential model, with a margin of error within 10%. A triazine mass fraction between 0.4 and 0.6 was found to be optimal. Among the factors studied, gas flow velocity has the most significant influence on desulfurization efficiency, while the injection rate plays a secondary role. An injection angle of 45° proved most effective, and the use of dual vertical symmetric nozzles achieved more uniform mixing between the natural gas and triazine solvent.Keywords
Funding Information
- State Key Research Development Program of China (2021YFC2800905-02)
- National Natural Science Foundation of China (52302402)
- Science and Technology Research Program of Chongqing Municipal Education Commission (KJZD-M202501502)
- Natural Science Basic Research Program of Shaanxi (2023-JC-QN-0544)
- Scientific Research Program Funded by Education Department of Shaanxi Provincial Government (23JK06)
- National Major Special Project (2025ZD1406806)
This publication has 24 references indexed in Scilit:
- Implementation of coupled CFD&DEM model for heat and mass transfer analysis in adsorption fluidized reactorsApplied Thermal Engineering, 2025
- Study on evolution law of non-equilibrium phase transition flow and performance improvement of steam ejector for MED-TVC desalination systemEnergy, 2025
- Heat and mass transfer performance analysis of a vertical tubular ammonia/water bubble absorber based on CFD modelingApplied Thermal Engineering, 2024
- Preparation and Performance Evaluation of Triazine Desulfurizer2023
- Research and development of on-site small skid-mounted natural gas to hydrogen generator in ChinaInternational Journal of Hydrogen Energy, 2023
- Mixing process of two streams within a steam ejector from the perspectives of mass, momentum and energy transferApplied Thermal Engineering, 2021
- Metal-free oxidative desulfurization over a microporous triazine polymer catalyst under ambient conditionsFuel Processing Technology, 2020
- Rigorous design of multiphase reactors: Identification of optimal conditions for mass transfer limited reactionsChemical Engineering and Processing - Process Intensification, 2018
- Static mixers: Effective means for intensifying mass transfer limited reactionsChemical Engineering and Processing - Process Intensification, 2013
- Natural gas removal of hydrogen sulphide and mercaptansApplied Catalysis B: Environment and Energy, 2012