Sufia Shahin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sufia Shahin has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Hussam Amrouch
Technical University of Munich
6 shared publications - Swati Deshwal
TUM School of Computation, Information and Technology, Chair of AI Processor Design, Munich Institute of Robotics and Machine Intelligence, Technical University of Munich, Munich, Germany
4 shared publications - Yogesh Singh Chauhan
Indian Institute of Technology (IIT) Kanpur
4 shared publications Yogesh Singh Chauhan
3 shared publications- Anirban Kar
Technical University of Munich
2 shared publications - Mahdi Benkhelifa
TUM School of Computation, Information and Technology, Chair of AI Processor Design, Munich Institute of Robotics and Machine Intelligence, Technical University of Munich, Munich, Germany
2 shared publications
Latest Publications
- Open Access
- 7 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Temperature-Dependent Soft-Error Analysis from 300 K to 77 K in Nanosheet and CFET
We investigate the impact of cryogenic temperatures on the Single Event Upset (SEU) reliability of the Gate-All-Around (GAA) Nanosheet FET (NSFET) and Complementary FET (CFET) devices. At the device level, we assess heavy-ion radiation (HIR)-induced transients and carrier profiles and compare CFET and NSFET for temperatures from 300 K to 77 K. For low doses, the peak current for both CFET and NSFET increases sharply as the temperature decreases into the cryogenic regime. However, for high doses, the peak current decreases with the temperature. Further, collection time increases with incident dose and temperature due to an increase in electron-hole pair (EHP) generation and a decrease in carrier mobility. CFET in comparison to NSFET, shows 32% higher peak current and requires 14.3% more time for charge collection at 300 K and 1 MeVcm 2 mg-1. At 77 K the difference is 23.7% and 13.8%, respectively. The circuit-level radiation resilience of CFET and NSFET-based CMOS inverters and 6T-Static Random Access Memories (SRAMs) also improves at cryogenic temperatures. We report that the SEU reliability of CFETbased CMOS inverters and SRAMs is better than the NSFETbased circuits for all doses and temperatures. Next, the impact of temperature on HIR-induced voltage drop, failure time, and critical LET for inverter and SRAM circuits is studied and compared for the two devices. For temperature in the range from 300 K to 77 K, the inverter voltage drop, failure time (for LET=1 MeVcm 2 mg-1), and critical LET with CFET are, on average, 36%, 3.6%, and 10% improved in comparison to NSFET, respectively. Similarly, with CFET, the improvements in SRAM storage node voltage drop and the critical LET are 2.4% and 20%, respectively.
- 7 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessTemperature-Dependent Soft-Error Analysis from 300 K to 77 K in Nanosheet and CFET
We investigate the impact of cryogenic temperatures on the Single Event Upset (SEU) reliability of the Gate-All-Around (GAA) Nanosheet FET (NSFET) and Complementary FET (CFET) devices. At the device level, we assess heavy-ion radiation (HIR)-induced transients and carrier profiles and compare CFET and NSFET for temperatures from 300 K to 77 K. For low doses, the peak current for both CFET and NSFET increases sharply as the temperature decreases into the cryogenic regime. However, for high doses, the peak current decreases with the temperature. Further, collection time increases with incident dose and temperature due to an increase in electron-hole pair (EHP) generation and a decrease in carrier mobility. CFET in comparison to NSFET, shows 32% higher peak current and requires 14.3% more time for charge collection at 300 K and 1 MeVcm 2 mg-1. At 77 K the difference is 23.7% and 13.8%, respectively. The circuit-level radiation resilience of CFET and NSFET-based CMOS inverters and 6T-Static Random Access Memories (SRAMs) also improves at cryogenic temperatures. We report that the SEU reliability of CFETbased CMOS inverters and SRAMs is better than the NSFETbased circuits for all doses and temperatures. Next, the impact of temperature on HIR-induced voltage drop, failure time, and critical LET for inverter and SRAM circuits is studied and compared for the two devices. For temperature in the range from 300 K to 77 K, the inverter voltage drop, failure time (for LET=1 MeVcm 2 mg-1), and critical LET with CFET are, on average, 36%, 3.6%, and 10% improved in comparison to NSFET, respectively. Similarly, with CFET, the improvements in SRAM storage node voltage drop and the critical LET are 2.4% and 20%, respectively.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 12, 153-158
Self-Heating and Parasitic Effects in Multi-Tier CFET Design
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 12, 153-158
Open AccessSelf-Heating and Parasitic Effects in Multi-Tier CFET Design
- Open Access
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 11, 188-196
Impact of Aging, Self-Heating, and Parasitics Effects on NSFET and CFET
This work presents a comparative analysis of Complementary Field-Effect Transistor (CFET) and Nanosheet FET (NSFET) architectures, with a focus on self-heating effects (SHE), Negative Bias Temperature Instability (NBTI), Hot Carrier Degradation (HCD), and the impact of Back-End-of-Line (BEOL) parasitics on standard cell performance. NBTI degradation is modeled using a framework combining Reaction-Diffusion (RD) and Reaction-Drift-Diffusion (RDD) mechanisms in TCAD. BEOL parasitics are extracted using TCAD-generated structures. Both the CFET and NSFET exhibit similar degradation behavior under NBTI stress. However, CFETs show more pronounced degradation due to HCD, primarily driven by stronger SHE. Next, we simulate CFET and NSFET-based 3D inverters and SRAM structures in TCAD, with BEOL interconnects up to M3 level, to study the impact of parasitics on the circuit performance. Meanwhile, CFETs offer ~50% area savings at the standard cell level and lower parasitics, leading to a 42% improvement in inverter propagation delay. The SRAM cells based on CFETs are also evaluated and compared against NSFET in terms of area, noise margins, and performance. CFET SRAM cell provides area gain along with faster and more stable write operation, providing a potential advantage in high-performance applications as compared to NSFET.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 11, 188-196
Open AccessImpact of Aging, Self-Heating, and Parasitics Effects on NSFET and CFET
This work presents a comparative analysis of Complementary Field-Effect Transistor (CFET) and Nanosheet FET (NSFET) architectures, with a focus on self-heating effects (SHE), Negative Bias Temperature Instability (NBTI), Hot Carrier Degradation (HCD), and the impact of Back-End-of-Line (BEOL) parasitics on standard cell performance. NBTI degradation is modeled using a framework combining Reaction-Diffusion (RD) and Reaction-Drift-Diffusion (RDD) mechanisms in TCAD. BEOL parasitics are extracted using TCAD-generated structures. Both the CFET and NSFET exhibit similar degradation behavior under NBTI stress. However, CFETs show more pronounced degradation due to HCD, primarily driven by stronger SHE. Next, we simulate CFET and NSFET-based 3D inverters and SRAM structures in TCAD, with BEOL interconnects up to M3 level, to study the impact of parasitics on the circuit performance. Meanwhile, CFETs offer ~50% area savings at the standard cell level and lower parasitics, leading to a 42% improvement in inverter propagation delay. The SRAM cells based on CFETs are also evaluated and compared against NSFET in terms of area, noise margins, and performance. CFET SRAM cell provides area gain along with faster and more stable write operation, providing a potential advantage in high-performance applications as compared to NSFET.
- Open Access
- 4 August 2025
- Published by Wiley
Impact of Aging, Self-Heating and Parasitics Effects on NSFET and CFET
This work presents a comparative analysis of Complementary Field-Effect Transistor (CFET) and Nanosheet FET (NSFET) architectures, with a focus on self-heating effects (SHE), Negative Bias Temperature Instability (NBTI), Hot Carrier Degradation (HCD), and the impact of Back-End-of-Line (BEOL) parasitics on standard cell performance. NBTI degradation is modeled using a framework combining Reaction-Diffusion (RD) and Reaction-Drift-Diffusion (RDD) mechanisms in TCAD. BEOL parasitics are extracted using TCAD-generated structures. Both the CFET and NSFET exhibit similar degradation behavior under NBTI stress. However, CFETs show more pronounced degradation due to HCD, primarily driven by stronger SHE. Next, we simulate CFET and NSFET-based 3D inverters and SRAM structures in TCAD, with BEOL interconnects up to M2 level, to study the impact of parasitics on the circuit performance. Meanwhile, CFETs offer ∼50% area savings at the standard cell level and lower parasitics, leading to a 42% improvement in inverter propagation delay. The SRAM cells based on CFETs are also evaluated and compared against NSFET in terms of area, noise margins, and performance. CFET SRAM cell provides area gain along with faster and more stable write operation, providing a potential advantage in high-performance applications as compared to NSFET.
- 4 August 2025
- Published by Wiley
Open AccessImpact of Aging, Self-Heating and Parasitics Effects on NSFET and CFET
This work presents a comparative analysis of Complementary Field-Effect Transistor (CFET) and Nanosheet FET (NSFET) architectures, with a focus on self-heating effects (SHE), Negative Bias Temperature Instability (NBTI), Hot Carrier Degradation (HCD), and the impact of Back-End-of-Line (BEOL) parasitics on standard cell performance. NBTI degradation is modeled using a framework combining Reaction-Diffusion (RD) and Reaction-Drift-Diffusion (RDD) mechanisms in TCAD. BEOL parasitics are extracted using TCAD-generated structures. Both the CFET and NSFET exhibit similar degradation behavior under NBTI stress. However, CFETs show more pronounced degradation due to HCD, primarily driven by stronger SHE. Next, we simulate CFET and NSFET-based 3D inverters and SRAM structures in TCAD, with BEOL interconnects up to M2 level, to study the impact of parasitics on the circuit performance. Meanwhile, CFETs offer ∼50% area savings at the standard cell level and lower parasitics, leading to a 42% improvement in inverter propagation delay. The SRAM cells based on CFETs are also evaluated and compared against NSFET in terms of area, noise margins, and performance. CFET SRAM cell provides area gain along with faster and more stable write operation, providing a potential advantage in high-performance applications as compared to NSFET.
- Open Access
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 11, 51-59
CFET Beyond 3 nm: SRAM Reliability Under Design-Time and Run-Time Variability
This work investigates the reliability of complementary field-effect transistors (CFETs) by addressing both design-time variability arising from process variations and run-time variability due to temperature and aging effects. A rigorously calibrated TCAD model, validated against experimental CFET data, is employed to quantify the impact of metal gate granularity (MGG)-induced work function variation (WFV) and random dopant fluctuation (RDF) on key device parameters, including the threshold voltage (VTH), on-state current (ION), and off-state current (IOFF). Temperature-dependent variability is systematically analyzed to further elucidate the behavior of these advanced devices. To capture the dynamic effects of aging, the reaction-diffusion (RD) framework—which accounts for defect generation due to Negative Bias Temperature Instability (NBTI)—is implemented in TCAD, enabling detailed modeling of trap generation and the corresponding VTH shifts in p-type transistors under varying gate stress biases (VGSTR) and operating temperatures. At the circuit level, a full array of 6T-SRAM cells with the requisite peripheral circuits is simulated using SPICE after careful calibration of the the industry-standard compact model of gate-all-around (BSIM-CMG) against the TCAD data. Variability analysis reveals that the access disturb margin achieves a cell sigma (μ/σ) of 17.4 at nominal supply voltage, significantly exceeding the 6σ robustness criterion for read disturbances. Moreover, as the operating temperature increases from 300K to 398K, the read static noise margin (RSNM) and hold static noise margin (HSNM) degrade by 13.7% and 6.37%, respectively, while the write static noise margin (WSNM) improves by 18.3 %. These findings provide critical insights into the design trade-offs and reliability challenges of CFET-based SRAMs.
- 9 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Exploratory Solid-State Computational Devices and Circuits
- Vol. 11, 51-59
Open AccessCFET Beyond 3 nm: SRAM Reliability Under Design-Time and Run-Time Variability
This work investigates the reliability of complementary field-effect transistors (CFETs) by addressing both design-time variability arising from process variations and run-time variability due to temperature and aging effects. A rigorously calibrated TCAD model, validated against experimental CFET data, is employed to quantify the impact of metal gate granularity (MGG)-induced work function variation (WFV) and random dopant fluctuation (RDF) on key device parameters, including the threshold voltage (VTH), on-state current (ION), and off-state current (IOFF). Temperature-dependent variability is systematically analyzed to further elucidate the behavior of these advanced devices. To capture the dynamic effects of aging, the reaction-diffusion (RD) framework—which accounts for defect generation due to Negative Bias Temperature Instability (NBTI)—is implemented in TCAD, enabling detailed modeling of trap generation and the corresponding VTH shifts in p-type transistors under varying gate stress biases (VGSTR) and operating temperatures. At the circuit level, a full array of 6T-SRAM cells with the requisite peripheral circuits is simulated using SPICE after careful calibration of the the industry-standard compact model of gate-all-around (BSIM-CMG) against the TCAD data. Variability analysis reveals that the access disturb margin achieves a cell sigma (μ/σ) of 17.4 at nominal supply voltage, significantly exceeding the 6σ robustness criterion for read disturbances. Moreover, as the operating temperature increases from 300K to 398K, the read static noise margin (RSNM) and hold static noise margin (HSNM) degrade by 13.7% and 6.37%, respectively, while the write static noise margin (WSNM) improves by 18.3 %. These findings provide critical insights into the design trade-offs and reliability challenges of CFET-based SRAMs.
- Open Access
- 8 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
CFET Beyond 3 nm: SRAM Reliability under Design-Time and Run-Time Variability
This work investigates the reliability of complementary field-effect transistors (CFETs) by addressing both design-time variability arising from process variations and run-time variability due to temperature and aging effects. A rigorously calibrated TCAD model, validated against experimental CFET data, is employed to quantify the impact of metal gate granularity (MGG)-induced work function variation (WFV) and random dopant fluctuation (RDF) on key device parameters, including the threshold voltage (V TH), on-state current (I ON), and off-state current (I OFF). Temperature-dependent variability is systematically analyzed to further elucidate the behavior of these advanced devices. To capture the dynamic effects of aging, the reaction-diffusion (RD) framework-which accounts for defect generation due to Negative Bias Temperature Instability (NBTI)-is implemented in TCAD, enabling detailed modeling of trap generation and the corresponding V TH shifts in p-type transistors under varying gate stress biases (V GSTR) and operating temperatures. At the circuit level, a full array of 6T-SRAM cells with the requisite peripheral circuits is simulated using SPICE after careful calibration of the the industry-standard compact model of gate-all-around (BSIM-CMG) against the TCAD data. Variability analysis reveals that the access disturb margin achieves a cell sigma (µ/σ) of 17.4 at nominal supply voltage, significantly exceeding the 6σ robustness criterion for read disturbances. Moreover, as the operating temperature increases from 300 K to 398 K, the read static noise margin (RSNM) and hold static noise margin (HSNM) degrade by 13.7% and 6.37%, respectively, while the write static noise margin (WSNM) improves by 18.3 %. These findings provide critical insights into the design trade-offs and reliability challenges of CFET-based SRAMs.
- 8 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessCFET Beyond 3 nm: SRAM Reliability under Design-Time and Run-Time Variability
This work investigates the reliability of complementary field-effect transistors (CFETs) by addressing both design-time variability arising from process variations and run-time variability due to temperature and aging effects. A rigorously calibrated TCAD model, validated against experimental CFET data, is employed to quantify the impact of metal gate granularity (MGG)-induced work function variation (WFV) and random dopant fluctuation (RDF) on key device parameters, including the threshold voltage (V TH), on-state current (I ON), and off-state current (I OFF). Temperature-dependent variability is systematically analyzed to further elucidate the behavior of these advanced devices. To capture the dynamic effects of aging, the reaction-diffusion (RD) framework-which accounts for defect generation due to Negative Bias Temperature Instability (NBTI)-is implemented in TCAD, enabling detailed modeling of trap generation and the corresponding V TH shifts in p-type transistors under varying gate stress biases (V GSTR) and operating temperatures. At the circuit level, a full array of 6T-SRAM cells with the requisite peripheral circuits is simulated using SPICE after careful calibration of the the industry-standard compact model of gate-all-around (BSIM-CMG) against the TCAD data. Variability analysis reveals that the access disturb margin achieves a cell sigma (µ/σ) of 17.4 at nominal supply voltage, significantly exceeding the 6σ robustness criterion for read disturbances. Moreover, as the operating temperature increases from 300 K to 398 K, the read static noise margin (RSNM) and hold static noise margin (HSNM) degrade by 13.7% and 6.37%, respectively, while the write static noise margin (WSNM) improves by 18.3 %. These findings provide critical insights into the design trade-offs and reliability challenges of CFET-based SRAMs.