Maïlys Bouhot
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maïlys Bouhot has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Laurent Jolivet
ISTEP
3 shared publications - Nikolaos Skarpelis
Faculty of Geology and Geoenvironment University of Athens—Greece Athens Greece
3 shared publications - Onno Oncken
Helmholtz Centre Potsdam, GFZ German Research Centre for Geosciences, Potsdam, Germany
3 shared publications - Armel Menant
Université Côte d’Azur, CNRS, Observatoire de la Côte d’Azur, IRD, Géoazur, Valbonne, France
2 shared publications - Clément Ganino2 shared publications
- Samuel Angiboust
ENS de Lyon, University Lyon 1, LGL-TPE, CNRS UMR5276, Lyon, France
2 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Spatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary wedge (Hellenic subduction zone)
The transfer of material from the downgoing plate to the overriding plate at depth exerts a first-order control on the mechanical and thermal evolution of subduction zones. However, the geometry, size, and temporal organization of deep tectonic slices formed during basal accretion remain poorly constrained, due to the limited resolution of geophysical imaging and the rarity of geological analogues preserving deep accretionary architectures formed during continental subduction.Here, we investigate the spatial extent and stacking dynamics of tectonic slices by reconstructing the architecture of the deep paleo-accretionary wedge through the study of the exhumed Phyllite-Quartzite (PQ) nappe, derived from microcontinental protoliths, which was formed by basal accretion during the Oligo-Miocene along the Hellenic subduction zone. We carried out a multidisciplinary study of this now-exhumed PQ nappe, which crops out discontinuously from Crete to the Peloponnese (Greece). Preserved in a fore-arc position and weakly overprinted by later tectonic events, this natural laboratory provides direct access to deep accretionary processes.An integrated petro-structural study conducted across southeastern Peloponnese and Kythira combines detailed mapping, structural analysis, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling. This approach allows us to distinguish several tectono-metamorphic sub-units within the PQ nappe stack, each recording a distinct P-T evolution that constrains the depth of basal accretion for successive episodes. Hypotheses of lateral continuity between these sub-units provide first-order constraints on their present-day spatial extent and on the minimum size of individual accretionary slices.In southeastern Peloponnese, two HP-LT sub-units are identified within the PQ nappe stack, while at least two equivalent sub-units are recognized on Kythira. These sub-units record a systematic increase in peak temperature from the base to the top of the HP-LT nappe stack, consistent with successive episodes of basal accretion. Reconstructed P-T conditions indicate that basal accretion occurred at depths of ~50-60 km along the subduction interface. Based on spatial correlations between structurally equivalent HP–LT sub-units exposed in neighboring regions along strike, we infer a minimum present-day lateral continuity of individual accretionary slices. On this basis, deep tectonic slices formed during basal accretion are inferred to currently extend over several tens of kilometers in the trench-perpendicular direction and up to a hundred kilometers along strike.This study provides new quantitative constraints on the depth, lateral extent, and dynamics of tectonic underplating, with direct relevance for the Hellenic margin, where such processes may still be active, and for active subduction zones worldwide.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessSpatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary wedge (Hellenic subduction zone)
The transfer of material from the downgoing plate to the overriding plate at depth exerts a first-order control on the mechanical and thermal evolution of subduction zones. However, the geometry, size, and temporal organization of deep tectonic slices formed during basal accretion remain poorly constrained, due to the limited resolution of geophysical imaging and the rarity of geological analogues preserving deep accretionary architectures formed during continental subduction.Here, we investigate the spatial extent and stacking dynamics of tectonic slices by reconstructing the architecture of the deep paleo-accretionary wedge through the study of the exhumed Phyllite-Quartzite (PQ) nappe, derived from microcontinental protoliths, which was formed by basal accretion during the Oligo-Miocene along the Hellenic subduction zone. We carried out a multidisciplinary study of this now-exhumed PQ nappe, which crops out discontinuously from Crete to the Peloponnese (Greece). Preserved in a fore-arc position and weakly overprinted by later tectonic events, this natural laboratory provides direct access to deep accretionary processes.An integrated petro-structural study conducted across southeastern Peloponnese and Kythira combines detailed mapping, structural analysis, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling. This approach allows us to distinguish several tectono-metamorphic sub-units within the PQ nappe stack, each recording a distinct P-T evolution that constrains the depth of basal accretion for successive episodes. Hypotheses of lateral continuity between these sub-units provide first-order constraints on their present-day spatial extent and on the minimum size of individual accretionary slices.In southeastern Peloponnese, two HP-LT sub-units are identified within the PQ nappe stack, while at least two equivalent sub-units are recognized on Kythira. These sub-units record a systematic increase in peak temperature from the base to the top of the HP-LT nappe stack, consistent with successive episodes of basal accretion. Reconstructed P-T conditions indicate that basal accretion occurred at depths of ~50-60 km along the subduction interface. Based on spatial correlations between structurally equivalent HP–LT sub-units exposed in neighboring regions along strike, we infer a minimum present-day lateral continuity of individual accretionary slices. On this basis, deep tectonic slices formed during basal accretion are inferred to currently extend over several tens of kilometers in the trench-perpendicular direction and up to a hundred kilometers along strike.This study provides new quantitative constraints on the depth, lateral extent, and dynamics of tectonic underplating, with direct relevance for the Hellenic margin, where such processes may still be active, and for active subduction zones worldwide.
- Open Access
- 28 November 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (12)
3D Petro‐Structural Evolution of the High Pressure‐Low Temperature Phyllite‐Quartzite Nappe Pile in Southern Peloponnese, Greece
Tectonic underplating of high‐pressure/low‐temperature (HP‐LT) tectonic slices is a key mechanism in crustal growth at convergent margins. Yet, the processes controlling the geometry, depth and sequence of underplating events remain poorly constrained. We investigate the 3D petro‐structural architecture of the Phyllite‐Quartzite (PQ) nappe stack in southeastern Peloponnese (Greece), a well‐preserved segment of an Oligo‐Miocene accretionary complex within the Hellenic subduction zone, to constrain how successive pluri‐kilometric slices were formed and exhumed. Detailed structural mapping, petrology, Raman thermometry and thermobarometric modeling reveal two distinct sub‐units: Velanidhia and Pandanassa, interpreted as individual tectonic slices underplated at ∼50–60 km depth. Their pressure peak conditions (Velanidhia: 16 ± 1 kbar, 480 ± 10°C; Pandanassa: 15–18 kbar, 435 ± 21°C) and contrasted retrograde pressure‐temperature paths, witnessing post‐peak heating in Velanidhia and isothermal decompression in Pandanassa, reflect discrete underplating events under evolving thermal regimes. Geological cross‐sections and structural analysis reveal a deep paleo‐accretionary wedge geometry, involving a top‐to‐the‐E ductile‐brittle detachment that accommodated syn‐orogenic exhumation of a dome‐shaped HP‐LT nappe stack later crosscut by steep normal faults. Thanks to the detailed characterization and structural architecture of the PQ series, it is possible to constrain the trench‐parallel (≥115 km) and trench‐perpendicular (≥50 km) dimensions of each tectono‐metamorphic unit, confirming their pluri‐kilometric lateral extent. This work provides new insights into how episodic underplating at the subduction interface, witnessed by stacked tectono‐metamorphic units with contrasted P‐T evolution, governs the architecture of paleo‐accretionary wedges at active margins.
- 28 November 2025
- Published by American Geophysical Union (AGU) in Tectonics
- Vol. 44 (12)
Open Access3D Petro‐Structural Evolution of the High Pressure‐Low Temperature Phyllite‐Quartzite Nappe Pile in Southern Peloponnese, Greece
Tectonic underplating of high‐pressure/low‐temperature (HP‐LT) tectonic slices is a key mechanism in crustal growth at convergent margins. Yet, the processes controlling the geometry, depth and sequence of underplating events remain poorly constrained. We investigate the 3D petro‐structural architecture of the Phyllite‐Quartzite (PQ) nappe stack in southeastern Peloponnese (Greece), a well‐preserved segment of an Oligo‐Miocene accretionary complex within the Hellenic subduction zone, to constrain how successive pluri‐kilometric slices were formed and exhumed. Detailed structural mapping, petrology, Raman thermometry and thermobarometric modeling reveal two distinct sub‐units: Velanidhia and Pandanassa, interpreted as individual tectonic slices underplated at ∼50–60 km depth. Their pressure peak conditions (Velanidhia: 16 ± 1 kbar, 480 ± 10°C; Pandanassa: 15–18 kbar, 435 ± 21°C) and contrasted retrograde pressure‐temperature paths, witnessing post‐peak heating in Velanidhia and isothermal decompression in Pandanassa, reflect discrete underplating events under evolving thermal regimes. Geological cross‐sections and structural analysis reveal a deep paleo‐accretionary wedge geometry, involving a top‐to‐the‐E ductile‐brittle detachment that accommodated syn‐orogenic exhumation of a dome‐shaped HP‐LT nappe stack later crosscut by steep normal faults. Thanks to the detailed characterization and structural architecture of the PQ series, it is possible to constrain the trench‐parallel (≥115 km) and trench‐perpendicular (≥50 km) dimensions of each tectono‐metamorphic unit, confirming their pluri‐kilometric lateral extent. This work provides new insights into how episodic underplating at the subduction interface, witnessed by stacked tectono‐metamorphic units with contrasted P‐T evolution, governs the architecture of paleo‐accretionary wedges at active margins.
- Open Access
- 18 March 2025
- Published by Copernicus GmbH
Spatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary complex (SE-Peloponnese and Kythira, Greece)
The massive transfer of material at depth significantly influences the long-term morphology of active subduction zones. However, the process of basal accretion (or tectonic underplating), when active, remains challenging to observe directly, due to the low resolution of geophysical imaging at high depth and the lack of spatial and temporal constraints on its tectonic and topographic signature in fore-arc domains. To tackle this issue, we aim at constraining the size of accreted tectonic slices that were stacked at high pressure/low temperature (HP/LT) conditions to build an accretionary complex.To provide such constraints, we carried out a multidisciplinary study on the now-exhumed Phyllite Quartzite paleo-accretionary complex dated to the Oligo-Miocene, which crops out discontinuously along the active Hellenic subduction zone (Greece). This natural laboratory represents a key site for studying deep accretion processes as it remains in a fore-arc position and has not undergone a strong overprinting by later tectonic events.A petro-structural study was therefore undertaken to identify the different sub-units of the Phyllite Quartzite complex. Detailed mapping of Kythira and southeastern Peloponnese, combined with structural measurements, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling, revealed several tectono-metamorphic sub-units forming this nappe stack. These units are distinguished by their petrological characteristics, the orientation of finite deformation markers, and their pressure-temperature history.The results highlight two HP/LT sub-units in southeastern Peloponnese, which are also likely present on the island of Kythira, where one or two additional sub-units have been identified. These sub-units exhibit a distinct metamorphic evolution characterized by an increasing peak temperature from the base to the top of the HP/LT nappe stack. These observations suggest that the Phyllite-Quartzite paleo-accretionary complex was formed through a minimum of three successive episodes of basal accretion in this area. To better constrain the geometry of these units, spatial correlations with the neighboring regions where the nappe stack crops out are proposed, providing a minimum estimate of the size of the HP/LT units. The slices are estimated to measure tens of kilometers by hundreds of kilometers in the trench-perpendicular and trench-parallel directions, respectively. This study thus represents a first key step for constraining the characteristic size and the dynamics of tectonic underplating, which may still be active along the Hellenic margin and is observed in many active subduction zones worldwide.
- 18 March 2025
- Published by Copernicus GmbH
Open AccessSpatial extent of deep slab slicing events: Insights from the Phyllite-Quartzite paleo-accretionary complex (SE-Peloponnese and Kythira, Greece)
The massive transfer of material at depth significantly influences the long-term morphology of active subduction zones. However, the process of basal accretion (or tectonic underplating), when active, remains challenging to observe directly, due to the low resolution of geophysical imaging at high depth and the lack of spatial and temporal constraints on its tectonic and topographic signature in fore-arc domains. To tackle this issue, we aim at constraining the size of accreted tectonic slices that were stacked at high pressure/low temperature (HP/LT) conditions to build an accretionary complex.To provide such constraints, we carried out a multidisciplinary study on the now-exhumed Phyllite Quartzite paleo-accretionary complex dated to the Oligo-Miocene, which crops out discontinuously along the active Hellenic subduction zone (Greece). This natural laboratory represents a key site for studying deep accretion processes as it remains in a fore-arc position and has not undergone a strong overprinting by later tectonic events.A petro-structural study was therefore undertaken to identify the different sub-units of the Phyllite Quartzite complex. Detailed mapping of Kythira and southeastern Peloponnese, combined with structural measurements, petrological observations, Raman spectroscopy of carbonaceous material, and thermobarometric modeling, revealed several tectono-metamorphic sub-units forming this nappe stack. These units are distinguished by their petrological characteristics, the orientation of finite deformation markers, and their pressure-temperature history.The results highlight two HP/LT sub-units in southeastern Peloponnese, which are also likely present on the island of Kythira, where one or two additional sub-units have been identified. These sub-units exhibit a distinct metamorphic evolution characterized by an increasing peak temperature from the base to the top of the HP/LT nappe stack. These observations suggest that the Phyllite-Quartzite paleo-accretionary complex was formed through a minimum of three successive episodes of basal accretion in this area. To better constrain the geometry of these units, spatial correlations with the neighboring regions where the nappe stack crops out are proposed, providing a minimum estimate of the size of the HP/LT units. The slices are estimated to measure tens of kilometers by hundreds of kilometers in the trench-perpendicular and trench-parallel directions, respectively. This study thus represents a first key step for constraining the characteristic size and the dynamics of tectonic underplating, which may still be active along the Hellenic margin and is observed in many active subduction zones worldwide.