Siddhartha Shankar Kashyap
Siddhartha Shankar Kashyap has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Jaydip D. Bhaliya
CSIR-Indian Institute of Chemical Technology (CSIR-IICT)
2 shared publications Cheroor Arathi
CSIR-Indian Institute of Chemical Technology (CSIR-IICT)
1 shared publication- Jayesh Shankar Waghmare1 shared publication
- Kashmiri Borah
Polymers and Functional Materials Department CSIR‐Indian Institute of Chemical Technology (CSIR‐IICT) Hyderabad India
1 shared publication - Kavya Lekha Sunkara
Academy of scientific and Innovative research (AcSIR) Ghaziabad India
1 shared publication - Ramanuj Narayan
Polymers and Functional Materials Division CSIR‐Indian Institute of Chemical Technology Hyderabad 500007 India
1 shared publication
Latest Publications
- 24 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (9) , 4970-4985
Sustainable Waterborne Polyurethane Coatings Reinforced with Bio-Functionalized Carbon Nanofillers for Enhanced Protective Performance
Increasing environmental constraints have intensified the need for coating systems that integrate functional performance with sustainable material design principles. Here, we address this challenge by transitioning from conventional solvent-based polyurethane (PU) to a waterborne system derived from renewable castor oil, a low-cost vegetable resource, while preserving practical performance. To further improve functionality, multi-walled carbon nanotubes (MWCNTs) were added as reinforcing fillers (0.05−0.25 wt %), and their dispersion into the aqueous polymer matrix was enhanced through mild surface modification using tannic acid (a bio-based polyphenol). The resulting hybrid waterborne dispersions remained stable during one month of storage, with dispersions up to 0.1 wt % of MNT-TA maintaining particle sizes <150 nm without detectable aggregation, indicating good colloidal stability. However, the highest filler loading (0.25 wt %) showed slight aggregation, indicating the practical dispersion limit at elevated nanofiller concentrations. This approach enabled the development of an inorganic−organic hybrid coating suitable for direct-to-metal (DTM) applications, offering a strong balance of mechanical strength as well as surface durability. The coatings also exhibited improved wear resistance, withstanding up to 1000 friction cycles, along with a robust adhesive strength of ∼2.4 MPa. Notably, the optimized formulation with a 0.1 wt % filler showed superior electrochemical performance, including a low corrosion current (Icorr: 1.8 × 10−10 A cm−2), reduced corrosion rate (CR: 2.1 × 10−6 mmpy), and high coating resistance (Rp: 4.9 × 106 Ω). Beyond the optimum filler loading, the anticorrosive performance gradually declined as a result of MNT-TA agglomeration. This study presents a unified design strategy based on castor oil-derived polymer synthesis and bio-inspired nanofiller functionalization, resulting in a hybrid coating system that simultaneously achieves sustainability, structural integrity, and enhanced interfacial performance.
- 24 August 2026
- Published by American Chemical Society (ACS) in ACS Applied Engineering Materials
- Vol. 4 (9) , 4970-4985
Sustainable Waterborne Polyurethane Coatings Reinforced with Bio-Functionalized Carbon Nanofillers for Enhanced Protective Performance
Increasing environmental constraints have intensified the need for coating systems that integrate functional performance with sustainable material design principles. Here, we address this challenge by transitioning from conventional solvent-based polyurethane (PU) to a waterborne system derived from renewable castor oil, a low-cost vegetable resource, while preserving practical performance. To further improve functionality, multi-walled carbon nanotubes (MWCNTs) were added as reinforcing fillers (0.05−0.25 wt %), and their dispersion into the aqueous polymer matrix was enhanced through mild surface modification using tannic acid (a bio-based polyphenol). The resulting hybrid waterborne dispersions remained stable during one month of storage, with dispersions up to 0.1 wt % of MNT-TA maintaining particle sizes <150 nm without detectable aggregation, indicating good colloidal stability. However, the highest filler loading (0.25 wt %) showed slight aggregation, indicating the practical dispersion limit at elevated nanofiller concentrations. This approach enabled the development of an inorganic−organic hybrid coating suitable for direct-to-metal (DTM) applications, offering a strong balance of mechanical strength as well as surface durability. The coatings also exhibited improved wear resistance, withstanding up to 1000 friction cycles, along with a robust adhesive strength of ∼2.4 MPa. Notably, the optimized formulation with a 0.1 wt % filler showed superior electrochemical performance, including a low corrosion current (Icorr: 1.8 × 10−10 A cm−2), reduced corrosion rate (CR: 2.1 × 10−6 mmpy), and high coating resistance (Rp: 4.9 × 106 Ω). Beyond the optimum filler loading, the anticorrosive performance gradually declined as a result of MNT-TA agglomeration. This study presents a unified design strategy based on castor oil-derived polymer synthesis and bio-inspired nanofiller functionalization, resulting in a hybrid coating system that simultaneously achieves sustainability, structural integrity, and enhanced interfacial performance.
- 14 March 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 62
Phosphated graphene oxide-enhanced water-based acrylic coatings with improved anti-corrosion and antimicrobial properties
- 14 March 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 62
Phosphated graphene oxide-enhanced water-based acrylic coatings with improved anti-corrosion and antimicrobial properties