Hitoshi Mitsuda
Research Subjects
Hitoshi Mitsuda has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Chisato Nagaya
Kanso Technos Co., Ltd
2 shared publicationsNaoyuki Tahara
Kanso Technos Co., Ltd
2 shared publicationsTakeshi Fujii
Kanso Technos Co., Ltd
2 shared publications- Akihiko Murata
Japan Agency for Marine-Earth Science and Technology
1 shared publication - Chikako Cheong
National Institute of Advanced Industrial Science and Technology, National Metrology Institute of Japan
1 shared publication - Daisuke Sasano
Japan Meteorological Agency
1 shared publication
Latest Publications
- Open Access
- 23 March 2025
- Published by Springer Nature
- p. 203-235
Development of Multiparametric Standard Seawater (MSSW) for CO2 Parameters, Dissolved Oxygen, and Density of Seawater
Multiparametric Standard Seawater (MSSW) is being developed based on the technology used to manufacture the reference material for nutrients in seawater (RMNS), without adding mercuric chloride to sterilize it, but by adopting aluminum bottles and plastic inner caps with high impermeability to gas and water vapor. The history, current status, and future plans for the development of MSSW for measurements of Practical Salinity, density, dissolved inorganic carbon, total alkalinity, pH, dissolved oxygen (DO), and dissolved organic matter are discussed. Substances that interfere with the Winkler method for DO determination (nitrite, iodate, and hydrogen peroxide) were evaluated for MSSW. The values of the parameters of interest were relatively homogeneous, but the concentrations of dissolved organic carbon depended on the serial number in the lot tested. Long-term stabilities were good in most cases, but DO concentrations began to gradually decrease immediately after production and appeared to stabilize a few years later. The Practical Salinity also tended to decrease (–0.00015 year–1), and the cause of the decreasing trend urgently needs to be clarified. One possibility is an increasing trend (about +0.00015 year–1) of the Practical Salinity of IAPSO standard seawater for salinity measurements.
- 23 March 2025
- Published by Springer Nature
- p. 203-235
Open AccessDevelopment of Multiparametric Standard Seawater (MSSW) for CO2 Parameters, Dissolved Oxygen, and Density of Seawater
Multiparametric Standard Seawater (MSSW) is being developed based on the technology used to manufacture the reference material for nutrients in seawater (RMNS), without adding mercuric chloride to sterilize it, but by adopting aluminum bottles and plastic inner caps with high impermeability to gas and water vapor. The history, current status, and future plans for the development of MSSW for measurements of Practical Salinity, density, dissolved inorganic carbon, total alkalinity, pH, dissolved oxygen (DO), and dissolved organic matter are discussed. Substances that interfere with the Winkler method for DO determination (nitrite, iodate, and hydrogen peroxide) were evaluated for MSSW. The values of the parameters of interest were relatively homogeneous, but the concentrations of dissolved organic carbon depended on the serial number in the lot tested. Long-term stabilities were good in most cases, but DO concentrations began to gradually decrease immediately after production and appeared to stabilize a few years later. The Practical Salinity also tended to decrease (–0.00015 year–1), and the cause of the decreasing trend urgently needs to be clarified. One possibility is an increasing trend (about +0.00015 year–1) of the Practical Salinity of IAPSO standard seawater for salinity measurements.
- Open Access
- 23 March 2025
- Published by Springer Nature
- p. 13-32
Production History of Certified Reference Materials of Nutrients in Seawater Developed by KANSO TECHNOS CO., LTD.
The development of reference materials for nutrients in seawater (RMNS) started in 1993, and production and distribution of RMNS began in 2000. In 2011, KANSO TECHNOS CO., LTD. (KANSO) became accredited as a reference material producer (International Organization for Standardization, ISO 17034). Since then, RMNS has been distributed worldwide as an SI-traceable certified reference material. RMNS (1) is 100% natural seawater (no additives); (2) contains all nutrients in one bottle; (3) is used directly without any dilution step; (4) is available as several lots of low to high nutrient concentrations; and (5) has guaranteed homogeneity and stability for 7 years. With the current measurement precision, we now can obtain homogeneity results of 0.1 to 0.2% at mid- to high-nutrient-concentration ranges. In this chapter, RMNS's development history, production and certification method are described.
- 23 March 2025
- Published by Springer Nature
- p. 13-32
Open AccessProduction History of Certified Reference Materials of Nutrients in Seawater Developed by KANSO TECHNOS CO., LTD.
The development of reference materials for nutrients in seawater (RMNS) started in 1993, and production and distribution of RMNS began in 2000. In 2011, KANSO TECHNOS CO., LTD. (KANSO) became accredited as a reference material producer (International Organization for Standardization, ISO 17034). Since then, RMNS has been distributed worldwide as an SI-traceable certified reference material. RMNS (1) is 100% natural seawater (no additives); (2) contains all nutrients in one bottle; (3) is used directly without any dilution step; (4) is available as several lots of low to high nutrient concentrations; and (5) has guaranteed homogeneity and stability for 7 years. With the current measurement precision, we now can obtain homogeneity results of 0.1 to 0.2% at mid- to high-nutrient-concentration ranges. In this chapter, RMNS's development history, production and certification method are described.
- Open Access
- 23 March 2025
- Published by Springer Nature
- p. 107-115
Development of SI Traceable Si Standard Solution for Nutrient Analysis in Seawater
A certified reference material of SI-traceable silicon standard solution (KANSO-Si standard solution) was developed that can be supplied in large quantities to improve the measurement comparability of nutrient analysis in seawater. The high-purity SiO2 was selected as the starting material of the KANSO-Si. The high-purity SiO2 was fused by Na2CO3 in an electric furnace, followed by dissolution in pure water. The established procedure could be expanded to the production scale of 100 mL × 1000 bottles per lot at 1000 mg Si kg−1 mass fraction of Si. The value assignment of mass fraction of Si in manufactured KANSO-Si was performed by continuous flow analysis calibrated by NMIJ CRM 3645-a Si standard solution. The relative value of expanded uncertainty of the certified value of mass fraction of Si in the KANSO-Si standard solution was 0.4% (k = 2) including the standard uncertainties related to the homogeneity, long-term stability, and value assignment of mass fraction of Si.
- 23 March 2025
- Published by Springer Nature
- p. 107-115
Open AccessDevelopment of SI Traceable Si Standard Solution for Nutrient Analysis in Seawater
A certified reference material of SI-traceable silicon standard solution (KANSO-Si standard solution) was developed that can be supplied in large quantities to improve the measurement comparability of nutrient analysis in seawater. The high-purity SiO2 was selected as the starting material of the KANSO-Si. The high-purity SiO2 was fused by Na2CO3 in an electric furnace, followed by dissolution in pure water. The established procedure could be expanded to the production scale of 100 mL × 1000 bottles per lot at 1000 mg Si kg−1 mass fraction of Si. The value assignment of mass fraction of Si in manufactured KANSO-Si was performed by continuous flow analysis calibrated by NMIJ CRM 3645-a Si standard solution. The relative value of expanded uncertainty of the certified value of mass fraction of Si in the KANSO-Si standard solution was 0.4% (k = 2) including the standard uncertainties related to the homogeneity, long-term stability, and value assignment of mass fraction of Si.