BGBinfu Gao

Binfu Gao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Binfu Gao has a total of 154 co-authors. Here are the top co-authors by number of shared publications:

  • Baoguo Wang

    Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China

    9 shared publications
  • Bin Zhang

    Institute of Plasma Physics, Hefei Institutes of Physical Science, Chinese Academy of Sciences, Hefei 230031, People’s Republic of China

    9 shared publications
  • Yang Wang

    Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China

    9 shared publications
  • Chuannan Xuan

    Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China

    8 shared publications
  • Chunyu He

    Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China

    8 shared publications
  • Junling Chen

    Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, China

    8 shared publications

Latest Publications

  • Open Access

    Impact of ICRH-driven beta-induced Alfvén eigenmode on fast-ion redistribution and ion heating in EAST plasmas

    by Tao Jin, Wei Zhang, Liqing Xu, Yong Xiao, Qi Zhong, Hongjian Zhao, Shiyao Lin, Tianfu Zhou, Yifei Jin, YuQi Chu, et al.

    In magnetically confined plasmas, energetic-particle (EP)-driven instabilities can induce redistribution and losses of energetic ions, thereby affecting plasma heating and confinement. In this work, fast-ion-driven beta-induced Alfvén eigenmode (BAE) excited by ion cyclotron resonance heating (ICRH) was investigated in low-density EAST plasmas using experimentally reconstructed equilibria and profiles. Experimentally, strong ICRH led to a significant increase in ion temperature and plasma stored energy, accompanied by the excitation of an Alfvén eigenmode at 64kHz under 1.6 MW heating power, while no such mode was observed at reduced power. Continuum analysis identified this mode as a core-localized BAE. To interpret these observations, integrated simulations combining TORIC, ASCOT, and GTC were performed. A modified fast-ion distribution function was implemented to capture the strong velocity-space anisotropy of ICRH-generated fast ions. Linear gyrokinetic simulations reproduced the observed BAE frequency and identified a threshold in fast-ion pressure for mode excitation. Orbit-following simulations with realistic wall geometry demonstrated that the BAE induces significant phase-space redistribution and enhances the loss of high-energy fast ions (energy >600keV). Separately, the ASCOT power-deposition analysis shows that the strong BAE reduces the collisional power transferred from fast ions to thermal ions, thereby suppressing the fast-ion contribution to ion heating and limiting the increase in ion temperature. As the measured BAE activity decreases in Phase B, recovery of this ion-heating channel explains the subsequent rise in ion temperature. These results clarify the interplay between ICRH-generated fast ions, BAE activity, and ion heating, and provide insights into optimizing fast-ion confinement and heating efficiency in future burning plasma devices.

  • Open Access

    Three-dimensional assessment of toroidal heat-load distribution on divertor targets in EAST

    by Wenxue Fu, Dahuan Zhu, Binfu Gao, Rong Yan, Chuannan Xuan, Yang Wang, Yang Lei, Bin Zhang, Mehdi Firdaouss, Pengfei Zi, et al.

    Although actively cooled W/Cu monoblock targets are designed for high steady-state heat exhaust, local overheating and damage have been observed on these targets in EAST. These observations suggest that, beyond the nominal heat-removal capability, the practical thermal margin may be compromised by engineering alignment, target geometry and plasma operating conditions—all of which can alter the local surface-normal heat flux via modifications in magnetic incidence and magnetic shadowing. In this work, the toroidal distribution of the heat loads on the EAST divertor is analyzed by integrating infrared thermography, finite element heat flux inversion, and three-dimensional field-line tracing using PFCFlux. This analysis focuses on the effects of toroidal-field ripple, cassette misalignment in the presence of ripple, and divertor geometry. It is shown that the 16-fold toroidal field ripple can produce a 2 π / 16 modulation of the peak heat flux on the current upper outer divertor target, with a peak fluctuation amplitude of approximately 17.75 % . Under a peak heat flux constraint of Q safe = 10  MW  m − 2 , the allowable average heat flux on the upper outer target (OT) decreases from 4.28   MW   m − 2 in the absence of ripple to 3.94   MW   m − 2 in the presence of ripple. When ripple and relative cassette misalignments are considered simultaneously for the same target, the allowable average heat flux is further reduced to 3.11 MW   m − 2 , 2.79 MW   m − 2 , and 2.27   MW   m − 2 for Δ = 0.6 mm , 1.0 mm , and 3.0   mm , respectively. Compared with the present upper OT, the toroidally curved lower outer vertical target (OVT) has higher allowable average heat fluxes under both ripple-free and ripple conditions without cassette misalignment, with values of 7.00 and 5.98 MW   m − 2 , respectively, compared with 4.28 and 3.94 MW   m − 2 for the upper OT. Undertoroidal-field ripple and a Δ = 1   mm misalignment, the new upper horizontal target achieves a higher allowable average heat flux than the lower outer horizontal target (OHT), with values of 4.70 and 4.01 MW   m − 2 , respectively. These results show that magnetic ripple, assembly tolerances, and toroidal geometric continuity must be considered in the thermal design of divertor targets in fusion devices.

  • Open Access

    Cross‐device and cross‐modal arc detection: transfer learning between EAST visible and WEST infrared diagnostics

    by Zhongfang Guan, Erwan Grelier, Bin Zhang, Sebastien Vives, Baoguo Wang, Victor Moncada, Léo Dubus, Jinping Qian, Kedong Li, Jian Liu, et al.

    This work presents an engineering-oriented data processing and model training pipeline for Experimental Advanced Superconducting Tokamak (EAST) visible and (W) Environment in Steady-state Tokamak (WEST) infrared data, enabling a systematic study of cross-device and cross-modal electric arc detection. A lightweight convolutional neural network is adopted as a cross-device arc detection model, and joint training and transfer learning experiments are conducted on EAST visible (VIS) and WEST infrared (IR) data. Single‐modality baselines are first trained on EAST and WEST, then evaluated zero‐shot on the opposite device, followed by a comparison of frozen‐backbone and fine‐tuned transfer for VIS → IR and IR → VIS. The results show that models trained from scratch on each diagnostic channel already achieve high precision and recall for arc detection, whereas direct zero-shot cross-modal transfer drives the arc recall on the opposite domain almost to zero. In contrast, starting from the single-modality baselines and modestly fine tuning higher convolutional layers and the classification head on the target domain can significantly restore-cross device, cross-modal detection performance, with positive class precision and recall approaching or even surpassing the single-domain baselines. Class activation map analysis further indicates that, under fine-tuned and joint training configurations, the models consistently focus on the antenna, the arc, and its surrounding scattering region, supporting physically meaningful explanations and suggesting that cross-device, cross-modal training can capture arc related structures that generalize across devices while providing a lightweight, scalable route to reusing imaging-based diagnostic knowledge with reduced annotation and retuning effort. Given that machine protection is safety-critical and that imaging diagnostics are never identical across devices, the transferability demonstrated in this work is directly relevant to equipping next-generation tokamaks such as ITER and BEST with a reliable arc-detection capability before a large native training set becomes available. On a newly commissioned device, arc events are rare, sporadic and safety-relevant, so deferring detection until a sufficiently large native training corpus has accumulated would leave the machine unprotected during the early operational phase, when limited operating experience makes the associated risks most difficult to characterize; cross-machine and cross-modal transfer instead enables a new device to inherit a usable detection capability from the outset. Accordingly, the present work is intended not merely as a benchmark of cross-domain accuracy, but as evidence that scalable, transferable arc monitoring can constitute a machine-protection layer of future fusion reactors.

  • Open Access

    Runaway plateau formation in EAST disruptions triggered by massive gases injection

    by T. Tang, L. Zeng, D. Chen, S. Lin, H. Zhuang, S. Zhao, H. Zhao, A. Ti, B. Zhang, Y. Sun, et al.

    Runaway-electron (RE) plateaus have been observed during disruptions in experimental advanced superconducting tokamak (EAST) plasmas following the massive injection of argon into low-density ohmic discharges, which are performed with a circular plasma configuration under full-metal wall conditions. RE plateaus can maximally carry a current of 270 kA and last up to 400 ms. The formation of RE plateaus strongly depends on lower pre-disruption electron densities (0.2–0.5 × 1019 m−3) and a lower amount of argon injection (400–1000 Pa l), which correspond to an enhanced pre-disruption RE population and a reduced post-disruption electron density, respectively. Pre-disruption REs were found to survive the thermal quench, serving as extra seeds for the RE plateau. In addition, magnetohydrodynamic activity during the thermal quench was found to cause significant RE loss and affect RE plateau formation; in particular, the m/n = 3/1 and m/n = 2/1 modes were observed in sequence, leading to distinct RE loss patterns. Simulations on RE generation by a 0D model further confirmed the key roles of RE seeds to form an RE plateau in EAST.

  • Open Access

    Study on erosion and deposition processes of lithium in magnetic shadow region on EAST

    by L. Mu, R. Yan, Y.M. Liu, C.N. Xuan, R. Ding, J. Peng, H. Xie, Y. Zhang, Y.Q. Sheng, X.Z. Shi, et al.

    The plasma–wall interaction in the magnetic shadow regions can influence phenomena such as fuel retention, though the role of neutral particle dynamics in the process remains scarcely quantified. Through a novel multi-diagnostic approach, this study investigates how neutral-induced erosion and impurity deposition modulates material migration behind limiters. By modifying and installing custom-designed Quartz crystal MicroBalances (QMBs) on the head of the Material and Plasma Evaluation System located at the equatorial port of sector H in EAST, the in-situ measurement of the erosion and deposition results of the lithium (Li) at different radial positions was performed. The average mass loss rates of the QMB crystal were −9.84 × 10 −1 ng cm −2 s −1 , 2.54 ng cm −2 s −1 , and 2.15 ng cm −2 s −1 at three locations with major radii of 2584 mm, 2784 mm, and 2734 mm, respectively. A clear transition from deposition to erosion was observed as the distance between QMB and plasma increased. Notably, the neutral-induced Li erosion rate was calculated using the 3D-GAPS code. The results prove that, in addition to the influence of plasma parameters on neutral-induced material erosion by varying the neutral energy spectrum, the radial position of the QMB also affects neutral-induced material erosion by changing the solid angle and the angle-dependent sputtering yield. This supports the existence of a limiter-adjacent impurity deposition zone, with material erosion by neutrals acting as a potential fuel retention mitigation mechanism. This work establishes the quantitative framework connecting neutral transport with wall material evolution, providing critical insights for next-step devices like ITER to optimize fuel retention amount.

  • Open Access

    Mechanism of core confinement improvement in EAST I-mode detachment experiments with neon seeding

    by Donggui Wu, Lin Yu, Xiao Lan Zou, Lingyi Meng, Xiaohe Wu, Kaibo Nan, Kai Jia, Qing Zang, Ling Zhang, Xiaoming Zhong, et al.

    This work presents a dedicated study on improved core energy confinement observed during neon-seeded I-mode detachment experiments on the EAST. Experimental results demonstrate that neon seeding facilitates the divertor detachment, as evidenced by rollover in the ion saturation current and a reduction in target surface temperature, while simultaneously avoiding the I-L back-transition. Notably, an increase in plasma stored energy and the H_{98} confinement factor is achieved, primarily attributed to elevated core electron and ion temperatures, despite a slight degradation of the pedestal. Higher neon seeding rates are found to promote deeper detachment and greater core confinement improvement with modest neon concentration and radiative loss fraction. Power balance analysis using the ONETWO code reveals a significant reduction in ion and electron thermal diffusivities after neon seeding. The predictions of plasma profiles with TGYRO code confirm the increment of core temperature. Subsequent quasi-linear gyrokinetic analysis with the Trapped Gyro-Landau Fluid (TGLF) model identifies that core heat transport is predominantly driven by trapped electron modes (TEMs). The study demonstrates that neon seeding stabilizes TEMs, primarily through enhanced collisionality, with main ion dilution playing a minor role. This suppression of TEM turbulence leads to a reduction in heat fluxes, which outweighs the radiative cooling effect and thereby improves core energy confinement. These results demonstrate that neon impurity seeding can enable the simultaneous achievement of divertor detachment and enhanced core confinement in I-mode operation on EAST, offering a valuable reference for solving core-edge integration issue.

  • Open Access

    First results of LHW generated fast electron induced melting of TZM limiter in EAST

    by Chuannan Xuan, Dahuan Zhu, Rong Yan, Binfu Gao, Yang Wang, Bin Zhang, Wenxue Fu, Zongxiao Guo, Baoguo Wang, Pengfei Zi, et al.

    In tokamak devices, the lower hybrid current drive (LHCD) is remarkably efficient for steady state plasma operation. However, hotspots were often found on the guard limiters in multiple machines with the increasing injected power from LHCD. This study reports the first experimental observation of TZM (titanium-zirconium-molybdenum alloy) limiter melting induced by lower hybrid wave (LHW) generated fast electrons in the EAST tokamak. Infrared camera and hard X-ray (HXR) diagnostics revealed that when 4.6 GHz LHW2 power was injected, fast electrons deposited along magnetic field lines onto the TZM limiter surface magnetically connected to the antenna, forming localized hotspots that ultimately led to melting. Heat load simulations with ANSYS demonstrated that parallel heat flux deposited on the TZM surface was increased by ~13 times compared with the background plasma heat flux. Post-mortem analysis showed melt motion of up to 19.6 mm along the gravity direction without droplet ejection. These results suggest that the melting of large tile in future fusion device may not cause noticeable impact on plasma operation, provided the melt pool doesn’t move to the PFC edge. The molten region exhibited distinct grain layering, including columnar grains (depth ~2.2 mm) and equiaxed grains (recrystallized zone), indicating deep thermal gradients due to prolonged fast electron exposure. The presence of frozen capillary waves and high apparent contact angles (~90°) on the surface confirmed solidification-dominated suppression of melt spreading. These findings provide critical insights for optimizing plasma-facing components (PFCs) design and mitigating thermal damage under LHW heating in future fusion devices.

  • Open Access

    Evolution and impacts of ITER-like W/Cu monoblocks with interface damage in EAST

    by Yang Wang, Dahuan Zhu, Chuannan Xuan, Wenxue Fu, Rong Yan, Chunyu He, Rui Ding, Gaoting Chen, Bin Zhang, Zongxiao Guo, et al.

    For ITER and BEST, it is essential to identify potential thermal fatigue damage of plasma-facing components (PFCs) and to evaluate their impact on plasma discharges before D–T nuclear fusion reaction. In 2021, ITER-like W/Cu monoblocks featuring a large chamfer (17 mm × 1.5 mm) were installed on the lower divertor target of EAST. The inclined structural design at the inter-gap of W/Cu monoblocks can reduce the probability of leading edge melting but may induce other types of damage due to a more steady-state heat flux loading on the surface, similar to the fish-scale surface of the divertor in ITER. As plasma discharges progressed, a strange phenomenon was found that bright hot spots indicative of localized thermal anomalies were frequently observed by infrared (IR) cameras, affecting approximately 41% of the modules along the toroidal direction. Subsequent investigations confirmed these anomalies primarily originated from interface damage, which significantly degraded heat transfer performance in the PFCs. IR thermography measurements combined with thermal simulations showed that interfacial heat transfer coefficient decreased to 2 × 10 ⁴ W (m 2 ·K) −1 after approximately 4800 plasma discharges, resulting in an estimated 18% increase in the steady-state surface temperature. With continued operation through autumn 2022, the interfacial heat transfer conductance further decreased to 5 × 10 3 W (m 2 ·K) −1 , leading to a 31% increase in surface temperature. The progression of interface cracking led to an abnormal temperature rise and thus facilitated incipient melting at the leading edges of the cassette modules. As the heating power continues to rise above 10 MW, melting is expected to occur more extensively along the 17 mm × 1.5 mm chamfer. Fortunately, before the onset of melting, the existing interface cracks within W/Cu monoblocks had negligible influence on plasma discharges. These findings provide critical reference data for the long-term application of W/Cu monoblocks in ITER and future fusion reactors.


  • Open Access

    Damage evolution and its impact of the W/Cu flat-type component for divertor target in EAST

    by Chunyu He, Dahuan Zhu, Chuannan Xuan, Gaoting Chen, Rong Yan, Changjun Li, Baoguo Wang, Binfu Gao, Yijie Han, Wenxue Fu, et al.

    W/Cu flat-type components are promising candidates for plasma-facing components in future fusion devices due to their flexible and efficient heat sink design. They are expected to be used in the inner/outer Reflector plates and Dome of ITER. To investigate their damage behaviors, a high-resolution infrared camera was employed to monitor the damaged C4 W/Cu flat-type component with a hypervapotron heat sink, located in the outer horizontal target (OHT) of the EAST lower divertor. The results show that the formation of W protrusions (‘Hills’) connects the early crack initiation stage with the final W exfoliation. To prevent further damage progression, it is recommended that for tokamaks, the damaged area be located two decay lengths away from the strike point—this distance is sufficient to guarantee safety. In such a scenario, if the damage lies within the private flux region, the parallel heat flux will be reduced to nearly zero. Although thermal performance degraded over time, the damaged OHT component was still able to maintain an approximate thermal equilibrium during each discharge, and no abnormal W impurity levels were observed. Linear fitting analysis estimates a total lifetime of approximately 3257 ± 277 shots, with a plasma stored energy of 298 ± 20 kJ corresponding to the onset of W melting in the surface protrusions. These findings shed light on the damage behavior of W/Cu flat-type components, provide key support for the development and validation of finite element analysis models, and offer practical guidance for the design and evaluation of ITER-like W/Cu flat-type components.


  • Open Access

    Vi-DP: low-latency video-based disruption prediction with multi-FOV fusion in EAST

    by M.W. Chen, K.J. Yang, J.J. Zhu, Q.J. Wang, F. Cheng, D.L. Chen, X.Z. Gong, B. Zhang, X.H. Zhang, Y.M. Duan, et al.

    Plasma disruption poses a significant safety challenge for future tokamaks and fusion reactors. Prior work on disruption prediction relies primarily on multiple scalar zero-dimensional (0D) signals and one-dimensional (1D) profiles as input of the predictor. Instead, this study investigates the feasibility of exclusively utilizing visible light video signals, consisting of sequential two-dimensional (2D) images, to achieve low-latency disruption prediction in EAST for the first time. To address the high data throughput of video input, striking a balance between real-time performance and accuracy, a lightweight deep neural network with combined spatial and temporal feature extraction structure is proposed for feature learning and sequence modeling. The datasets come from the wide-angle viewing systems distributed across EAST ports C, F, and K. The model is evaluated on both single-port and multi-port fusion datasets at different sampling rates, with all configurations demonstrating robust prediction performance. In particular, with multiple field-of-view fusion dataset, the model achieves a true positive rate of 92.8% and a false positive rate of 5.8%, demonstrating performance on par with state-of-the-art non-video-based disruption prediction models. Notably, the model takes merely 6.9 ms for inference, whereas its average warning time is 458 ms, which opens up the possibility for future online disruption warning and active control based on real-time video stream input. These initial results confirm the inherent predictive value of visible video for disruption warning and lay an important foundation for future endeavors focused on online disruption prediction that incorporates visual information. Furthermore, for future large-scale cross-device disruption warning databases, it could be advantageous to incorporate 2D visual signals in conjunction with conventional 0D and 1D signals to provide more comprehensive and robust features for disruption prediction.